Automotive fully integrated H-bridge motor driver

The VHN5019A-E is a full bridge motor driver intended for a wide range of automotive applications. The device incorporates a dual monolithic high-side drivers and two low-side switches. The high-side driver switch is designed using STMicroelectronics’ well known and proven proprietary VIPower®M0 technology that allows to efficiently integrate on the same die a true Power MOSFET with an intelligent signal/protection circuit.

The three dice are assembled in MultiPowerSO-30 package on electrically isolated lead-frames. This package, specifically designed for the harsh automotive environment offers improved thermal performance thanks to exposed die pads. The input signals INAand INBcan directly interface to the microcontroller to select the motor direction and the brake condition.

The DIAGA/ENAor DIAGB/ENB, when connected to an external pull-up resistor, enable one leg of the bridge. They also provide a feedback digital diagnostic signal. The CS pin allows to monitor the motor current by delivering a current proportional to its value when CS_DIS pin is driven low or left open. The PWM, up to 20 KHz, lets us to control the speed of the motor in all possible conditions. In all cases, a low-level state on the PWM pin turns-off both the LSAand LSBswitches. When PWM rises to a high-level, LSAor LSBturn-on again depending on the input pin state.

Output current limitation and thermal shutdown protects the concerned high-side in short to ground condition.

The short to battery condition is revealed by the overload detector or by thermal shutdown that latches off the relevant low-side.

Active VCCpin voltage clamp protects the device against low energy spikes in all configurations for the motor.

CP pin provides the necessary gate drive for an external n-channel PowerMOS used for reverse polarity protection.

Key Features

  • ECOPACK® : lead free and RoHS compliant
  • Automotive Grade: compliance with AEC guidelines
  • Output current: 30 A
  • 3 V CMOS compatible inputs
  • Undervoltage and overvoltage shutdown
  • High-side and low-side thermal shutdown
  • Cross-conduction protection
  • Current limitation
  • Very low standby power consumption
  • PWM operation up to 20 khz
  • Protection against:
    • Loss of ground and loss of VCC
  • Current sense output proportional to motor current
  • Charge pump output for reverse polarity protection
  • Output protected against short to ground and short to VCC

Circuit Diagram

0 Download

circuit_diagram_15701_thumbnail.png

Design

Technical Documentation

Product Specifications
Description Version Size
DS6269 DS6269: Automotive fully integrated H-bridge motor driver 9.0 464 KB
Application Notes
Description Version Size
AN4892 AN4892: VIPower M0-5 H-bridges - hardware design guide 2.0 2 MB

HW Model & CAD Libraries

HW Model & CAD Libraries
Description Version Size
VNH5019A-E OrCAD model 5.1 51 KB

Presentations & Training Material

Presentations
Description Version Size
Integrated H-bridge motor control 1.0 1 MB

Publications and Collaterals

Flyers
Description Version Size
VIPower™ VNH5 series 1.0 1 MB
Selection Guides
Description Version Size
br_car_body selection guide 1 MB
Brochures
Description Version Size
Smart power solutions for car body applications 3.0 1 MB

Tools and Software

Embedded Software
Evaluation Tools
Evaluation Tool Software
Product Evaluation Tools
Featured Products

Sample & Buy

Part Number Package Packing Type Operating Temperature (°C) (min) Operating Temperature (°C) (max) Marketing Status Unit Price (US$) * Quantity ECCN (EU) ECCN (US) Country of Origin More info Order from ST Order from Distributors
VNH5019ATR-E SO-30 Multi Power Tape And Reel - - Active 4.13 1000 NEC EAR99 MALAYSIA MORE INFO Get Sample Add to cart DISTRIBUTOR AVAILABILITY
VNH5019A-E SO-30 Multi Power Tube - - NRND 4.13 1000 NEC EAR99 - MORE INFO DISTRIBUTOR AVAILABILITY
test

(*) Suggested Resale Price per unit (USD) for BUDGETARY USE ONLY. For quotes, prices in local currency, please contact your local ST Sales Office  or our Distributors

Quality & Reliability

Part Number Marketing Status Package Grade RoHS Compliance Grade Material Declaration**
VNH5019ATR-E ActiveSO-30 Multi PowerAutomotiveEcopack2
VNH5019A-E NRNDSO-30 Multi PowerAutomotiveEcopack2 0 0
test

(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.

×