The LSM303AH is an ultra-low-power high-performance system-in-package featuring a 3D digital linear acceleration sensor and a 3D digital magnetic sensor.
The LSM303AH has user-selectable linear acceleration full scales of ±2g/±4g/±8g/±16 g and is capable of measuring accelerations with output data rates from 1 Hz to 6400 Hz. The device has a magnetic field dynamic range of ±50 gauss with output data rates from10 Hz to 100 Hz. The LSM303AH includes an I2C serial bus interface that supports standard, fast mode, fast mode plus, and high-speed (100 kHz, 400 kHz, 1 MHz, and 3.4 MHz) and an SPI serial standard interface.
The LSM303AH has an integrated 256-level first-in, first-out (FIFO) buffer allowing the user to store data in order to limit intervention by the host processor. The FIFO buffer applies only to the accelerometer.
The embedded self-test capability allows the user to check the functioning of the sensor in the final application.
The system can be configured to generate an interrupt signal for free-fall, motion detection and magnetic field detection. The magnetic and accelerometer blocks can be enabled or put into power-down mode separately.
The LSM303AH is available in a plastic land grid array package (LGA) and is guaranteed to operate over an extended temperature range from -40 °C to +85 °C.
|DS11000: Ultra-compact high-performance eCompass module: ultra-low-power 3D accelerometer and 3D magnetometer||6.0||1 MB|
|AN5087: LSM303AH: ultra-compact, high-performance eCompass module||1.0||1 MB|
|TN0018: Surface mounting guidelines for MEMS sensors in an LGA package||6.0||214 KB|
|DT0058: Computing tilt measurement and tilt-compensated e-compass||1.0||220 KB|
|DT0059: Ellipsoid or sphere fitting for sensor calibration||2.0||409 KB|
|DT0060: Exploiting the gyroscope to update tilt measure and e-compass||1.0||226 KB|
|AEC-Q100-qualified for smart automotive applications||01.2018||1 MB|
|MEMS and Sensors, Smart solutions for IoT and enhanced user experience||1 MB|
|AndroidHAL-IIO||ST||Android sensor HAL for MEMS motion and environmental sensors (Industrial I/O framework)|
|AndroidHALInput||ST||Android sensor HAL for MEMS motion and environmental sensors (Input framework)|
|C-Driver-MEMS||ST||Standard C platform-independent drivers for MEMS motion and environmental sensors|
|LinuxDriverIIO||ST||Linux device drivers for MEMS motion and environmental sensors (Industrial I/O framework)|
|LinuxDriverInput||ST||Linux device drivers for MEMS motion and environmental sensors (Input framework)|
|STEVAL-MKI173V1||ST||LSM303AH adapter board for standard DIL24 socket|
|Part Number||Package||Packing Type||Marketing Status||Unit Price (US$) *||Quantity||ECCN (EU)||ECCN (US)||Country of Origin||More info||Order from ST||Order from Distributors|
|LSM303AH||LGA 2X2X1 12LD PITCH 0.5MM||Tray||Preview : Product is in design stage||-||-||NEC||EAR99||-||MORE INFO||No availability reported, please contact our Sales office|
|LSM303AHTR||LGA 2X2X1 12LD PITCH 0.5MM||Tape And Reel||Active : Product is in volume production||1.635||1000||NEC||EAR99||-||MORE INFO||Get Sample Add to cart||DISTRIBUTOR AVAILABILITY|
|Part Number||Marketing Status||Package||RoHS Compliance Grade||Material Declaration**|
|LSM303AH||Preview||LGA 2X2X1 12LD PITCH 0.5MM||Ecopack2|
|LSM303AHTR||Active||LGA 2X2X1 12LD PITCH 0.5MM||Ecopack2|
(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.