Digital temperature sensor and thermal watchdog

The STTS75 is a high-precision CMOS (digital) temperature sensor IC with a delta-sigma analog-to-digital (ADC) converter and an I2C-compatible serial digital interface. It is targeted for general applications such as personal computers, system thermal management, electronics equipment, and industrial controllers, and is packaged in the industry standard 8-lead MSOP(TSSOP) and SO8 packages.

The device contains a band gap temperature sensor and programmable 9- to 12-bit ADC which monitor and digitize the temperature to a resolution up to 0.0625 °C. The STTS75 is typically accurate to (±3 °C - max) over the full temperature measurement range of –55 °C to 125 °C with ±2 °C accuracy in the –25 °C to +100 °C range. At power-up, the STTS75 defaults to 9-bit resolution for software compatibility with the STLM75.

The STTS75 is specified for operating at supply voltages from 2.7 V to 5.5 V. Operating at 3.3 V, the supply current is typically (75 μA).

The onboard delta-sigma analog-to-digital converter (ADC) converts the measured temperature to a digital value that is calibrated in °C; for Fahrenheit applications a lookup table or conversion routine is required.

The STTS75 is factory-calibrated and requires no external components to measure temperature.

Key Features

  • Measures temperatures from –55 °C to +125 °C (–67 °F to +257 °F)
    • ±0.5 °C (typ) accuracy
    • ±2 °C (max) accuracy from –25 °C to +100 °C
  • Low operating current: 75 μA (typ)
  • No external components required
  • 2-wire I2 C/SMBus-compatible serial interface
    • Selectable serial bus address allows connection of up to eight devices on the same bus
  • Thermometer resolution is user-configurable from 9 (default) to 12 bits (0.5 °C to 0.0625 °C)
  • 9-bit conversion time is 45 ms (typ)
  • Programmable temperature threshold and hysteresis set points
  • Wide power supply range-operating voltage range: 2.7 V to 5.5 V
  • Power saving one-shot temperature measurement
  • Power-up defaults permit standalone operation as thermostat
  • Shutdown mode to minimize power consumption
  • Separate open drain output pin operates as an interrupt or comparator/thermostat output (dual purpose event pin)
  • Packages:
    • SO8
    • MSOP8 (TSSOP8)

Circuit Diagram

0 Download

circuit_diagram_13298_thumbnail.png

Design

Technical Documentation

Product Specifications
Description Version Size
DS5157 DS5157: Digital temperature sensor and thermal watchdog 11.1 664 KB

Publications and Collaterals

Flyers
Description Version Size
STTS75 2.2 706 KB
Brochures
Description Version Size
MEMS and Sensors, Smart solutions for IoT and enhanced user experience 1 MB
Support & Community

Sample & Buy

Part Number Package Packing Type Operating Temperature (°C) (min) Operating Temperature (°C) (max) Marketing Status Unit Price (US$) * Quantity ECCN (EU) ECCN (US) Country of Origin More info Order from ST Order from Distributors
STTS75DS2F MSOP/TSSOP 8 Tape And Reel -55 125 Active - - NEC EAR99 MALAYSIA MORE INFO DISTRIBUTOR AVAILABILITY
STTS75M2F SO-8 Tape And Reel -55 125 Active - - NEC EAR99 MOROCCO MORE INFO DISTRIBUTOR AVAILABILITY
test

(*) Suggested Resale Price per unit (USD) for BUDGETARY USE ONLY. For quotes, prices in local currency, please contact your local ST Sales Office  or our Distributors

Quality & Reliability

Part Number Marketing Status Package Grade RoHS Compliance Grade Material Declaration**
STTS75DS2F ActiveMSOP/TSSOP 8IndustrialEcopack2 0 0
STTS75M2F ActiveSO-8IndustrialEcopack1 (*) 0 0
test

(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.

×