SIP (ST21NFCD controller & ST33G1M2 Secure Element)

The ST54F is an all-in-one solution including ST21NFCD NFC controller and ST33G1M2 or ST33I1M2 Secure Element with the highest security level (EAL6+ and EMVCo certified hardware).

Fully manufactured in a secure environment, the ST33 provides the highest performance levels thanks to its ARM® SC300® core.

The 64-ball WFBGA (4 x 4 x 0.8 mm) ECOPACK® package provides a reduced footprint and pin-to-pin compatibility with the STMicroelectronics NFC standalone solution. There is no internal direct connection between the two devices inside the package.

A complete range of memory sizes up to 2048 Kbyte (depending on profile) of non-volatile Flash memory is available on the Secure Element.

In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK® packages, depending on their level of environmental compliance. ECOPACK® specifications, grade definitions and product status are available at: www.st.com. ECOPACK® is an ST trademark.

Key Features

  • SIP (system-in-package) with ST21NFCD controller and ST33G1M2 or ST33I1M2 32-bit secure microcontroller for eUICC / eSE applications
  • NFC controller
    • ARM® Cortex®-M3 microcontroller
    • eFlash for full firmware update
    • Enhanced Active load modulation technology
    • Enhanced TX drive up to 1.3 W
    • Compatible with extremely small or metal frame antennas
    • Optimized power consumption modes
    • Battery voltage monitoring
    • System clock
      • FracN PLL input range from 13 to 76.8 MHz
      • 27.12 MHz external crystal oscillator
    • Automatic Wake-Up via communication interfaces, internal timers, GPIO, RF field or tag detection
    • Support of an external DC/DC converter for TX supply
  • RF communications
    • Active and passive Peer-to-Peer
      • ISO/IEC 18092 - NFCIP-1 Initiator & Target
    • Passive mode – Reader/Writer
      • NFC Forum Type 1/2/3/4/5 tags
      • ISO/IEC 15693
      • MIFARE® Classic12
      • Thinfilm (ex Kovio) Barcode
    • Active mode – Card Emulation
      • ISO/IEC 14443 Type A & B
      • JIS X 6319 – 4
      • MIFARE® Classic(a)(b) through SWP-CLT
  • External communication interfaces
    • Two SWP master interfaces up to 1.695 Mbit/s
    • I2C slave interface up to 3.4 MHz
    • Slave and master SPI interface up to 13 MHz
    • HSUART interface up to 6 Mbit/s
  • Secure microcontroller
    • ARM® SecurCore® SC300™ 32-bit RISC core
    • 1280 Kbytes of Flash memory available
    • 30 Kbytes of RAM
    • ISO/IEC 7816-3 interface for T=0 and T=1 protocols (master/slave mode)
    • Single wire protocol (SWP) Interface for communications with NFC router
    • SPI master/slave interface
  • Secure operating system
    • Supports state of the art Secure Element operating systems:
    • JavaCard™ 3.0.4 Classical Edition
    • GlobalPlatform™ 2.2.1 with Amendments A,C,D and E
    • EMVCo™ certification
  • Electrical characteristics
    • Battery voltage support from 2.4 V to 5 V
    • I/O dedicated voltage level (VPS_IO) from 1.62 V to 3.3 V
    • Supports Class B and C operating conditions for UICC
    • Ambient operating temperature -25 to + 85 °C
  • Applications
    • Mobile devices
    • Wearable devices
    • SmartWatch
    • Secure Connected Devices

Resources

Technical Documentation

Product Specifications
Description Version Size
DB3194 DB3194: NFC controller and Secure Element system-in-package 2.0 143 KB

Publications and Collaterals

Flyers
Description Version Size
ST NFC enabled solutions 1.0 2 MB
Secure MCUs for mobile communications and M2M 2.3 919 KB
Brochures
Description Version Size
Brochure_Secure MCUs_Secure Soluions_RS6103_BRSMCU0616.pdf 1 MB
ST’s solutions for mobile devices 2 MB
Support & Community


Sample & Buy

Part Number Marketing Status Quantity Unit Price (US$) * Package Packing Type ECCN (EU) ECCN (US) Country of Origin More info Order from ST Order from Distributors
ST54F Active - - CDIP 24 .610 S/B Tube 5A002A1A 5A002A1A FRANCE MORE INFO No availability reported, please contact our Sales office
test

(*) Suggested Resale Price per unit (USD) for BUDGETARY USE ONLY. For quotes, prices in local currency, please contact your local ST Sales Office  or our Distributors

Quality & Reliability

Part Number Marketing Status Package Grade RoHS Compliance Grade Material Declaration**
ST54F ActiveCDIP 24 .610 S/BIndustrialN/A
test

(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.

×