This evaluation board is based on the STLD40D that is a boost converter that operates from 3.0 V to 5.5 V and can provide an output voltage as 37 V and can drive up to 10 white LEDs in series. The converter is a PFM (pulse frequency modulation) inductor switches and can work in discontinuous (DCM) mode operation. A minimum OFF time of the embedded boost switch TSW is fixed internally and allows limiting the switching frequency. The output current capability is 20 mA with an output voltage of 37 V. The regulation is done by sensing the led current through the resistor RLED. The device can be turned ON/OFF through the logic enable signal pin EN. Applying a low frequency PWM signal the LEDs can be dimmed. The maximum peak inductor current can be programmed.
|DB0707: White LED controller evaluation board based on the STLD40D||1.2||60 KB|
|STEVAL-TLL001V1 gerber files||1.0||154 KB|
|STEVAL-TLL001V1 BOM||2.1||6 KB|
|Board schematic||1.0||12 KB|
|Evaluation products license agreement||1.4||128 KB|
|製品型番||Core Product||Marketing Status||Unit Price (US$) *||数量||ECCN (EU)||ECCN (US)||Country of Origin||More info||Order from ST||Order from Distributors|
|STEVAL-TLL001V1||STPS1L40M||NRND : Not Recommended for New Design. Product is in volume production only to support customers ongoing production.||35.53||1||NEC||EAR99||-||MORE INFO||直接購入 買い物かごに追加||DISTRIBUTOR AVAILABILITY|
|製品型番||Marketing Status||パッケージ||Grade||RoHS Compliance Grade||Material Declaration**|
(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.