The LPS25H is an ultra compact absolute piezoresistive pressure sensor. It includes a monolithic sensing element and an IC interface able to take the information from the sensing element and to provide a digital signal to the external world.
The sensing element consists of a suspended membrane realized inside a single mono-silicon substrate. It is capable to detect pressure and is manufactured using a dedicated process developed by ST.
The membrane is very small compared to the traditionally built silicon micromachined membranes. Membrane breakage is prevented by an intrinsic mechanical stopper.
The IC interface is manufactured using a standard CMOS process that allows a high level of integration to design a dedicated circuit which is trimmed to better match the sensing element characteristics.
The LPS25H is available in cavity and fully molded holed LGA package (HLGA). It is guaranteed to operate over a temperature range extending from -30 °C to +105 °C. The package is holed to allow external pressure to reach the sensing element.
|DS9284: MEMS pressure sensor: 260-1260 hPa absolute digital output barometer||5.0||1 MB|
|AN4503: Environmental sensors: Hardware abstraction layer for Android||3.0||241 KB|
|AN4450: Hardware and software guidelines for use of LPS25H pressure sensor||2.0||590 KB|
|TN1227: How to interpret pressure and temperature readings in the LPS25H pressure sensor||1.0||182 KB|
|TN1198: Surface mount guidelines for MEMS sensors in HLGA packages||1.0||128 KB|
|LPS25HB vs LPS25H: How to upgrade to LPS25HB||1.0||194 KB|
|X-NUCLEO-IKS01A1||ST||Motion MEMS and environmental sensor expansion board for STM32 Nucleo|
|AndroidHAL-IIO||ST||Android sensor HAL for MEMS motion and environmental sensors (Industrial I/O framework)|
|AndroidHALInput||ST||Android sensor HAL for MEMS motion and environmental sensors (Input framework)|
|BLUEMICROSYSTEM1||ST||This SW has been replaced by FP-SNS-MOTENV1|
|LinuxDriverIIO||ST||Linux device drivers for MEMS motion and environmental sensors (Industrial I/O framework)|
|LinuxDriverInput||ST||Linux device drivers for MEMS motion and environmental sensors (Input framework)|
|製品型番||パッケージ||Packing Type||Marketing Status||Unit Price (US$) *||数量||ECCN (EU)||ECCN (US)||Country of Origin||More info||Order from ST||Order from Distributors|
|LPS25H||HCLGA-10L 2.5 X 2.5||Tray||NRND : Not Recommended for New Design. Product is in volume production only to support customers ongoing production.||-||-||NEC||EAR99||-||MORE INFO||No availability reported, please contact our Sales office|
|LPS25HTR||HCLGA-10L 2.5 X 2.5||Tape And Reel||Active : Product is in volume production||-||-||NEC||EAR99||MALTA||MORE INFO||DISTRIBUTOR AVAILABILITY|
|製品型番||Marketing Status||パッケージ||RoHS Compliance Grade||Material Declaration**|
|LPS25H||NRND||HCLGA-10L 2.5 X 2.5||Ecopack2|
|LPS25HTR||アクティブ||HCLGA-10L 2.5 X 2.5||Ecopack2|
(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.