The STNS01 is a linear charger for single-cell Li-Ion batteries integrating an LDO regulator and several battery protection functions.
The STNS01 uses a CC/CV algorithm to charge the battery; the fast-charge current can be programmed using an external resistor. Pre-charge current and termination current are scaled accordingly. The floating voltage value is 4.2 V.
The input supply voltage is normally used to charge the battery and provide power to the LDO regulator. When a valid input voltage is not present and the battery is not empty, the device automatically switches to battery power.
The STNS01 integrates overcharge, over-discharge and overcurrent protection circuitry to prevent the battery from being damaged under fault conditions. It also features a charger enable input to stop the charging process when battery overtemperature is detected by an external circuitry.
When the shutdown mode is activated, the battery power consumption is reduced to less than 500 nA to maximize battery life during shelf time or shipping. The device is available in the DFN12L (3x3x0.75 mm) package.
|製品型番||パッケージ||Packing Type||Marketing Status||Unit Price (US$) *||数量||ECCN (EU)||ECCN (US)||Country of Origin||More info||Order from ST||Order from Distributors|
|STNS01PUR||VFDFPN 12 3x3x0.75||Tape And Reel||Active : Product is in volume production||1.295||1000||NEC||EAR99||MALAYSIA||MORE INFO||サンプル入手 買い物かごに追加||DISTRIBUTOR AVAILABILITY|
|製品型番||Marketing Status||パッケージ||Grade||RoHS Compliance Grade||Material Declaration**|
|STNS01PUR||アクティブ||VFDFPN 12 3x3x0.75||Industrial||Ecopack2|
(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.