2x180 W / 1x300 W low voltage operation PWM digital input power amplifier with I2C diagnostics and step-up driver

The FDA2100LV is a new BCD technology dual bridge class D amplifier, specially intended for car radio applications.

Thanks to the BCD6-SOI (Silicon On Insulation) technology it is possible to integrate a high performance D/A converter together with powerful MOSFET output amplifier working in class D, to get outstanding efficiency with respect to the standard class AB.

The D/A conversion on board allows the performance to reach an outstanding 110 dB S/N ratio with 105 dB of dynamic range. The feedback loop includes the output L-C low-pass filter, allowing superior frequency response linearity and lower distortion independently of the inductor and capacitor quality.

A full diagnostics array communicates the status of each speaker through the I2C bus. The possibility to control the device by means of the I2C bus makes FDA2100LV very flexible.

Thanks to the solutions implemented to solve the EMI problems, the device can be used in the standard single DIN car-radio box together with the tuner.

A built-in step-up driver allows up to 150 W output power with the standard 14 V supply voltage.

The FDA2100LV is moreover compliant to the most recent OEM specifications for low voltage operation (so called 'start-stop' battery profile during engine stop), helping car manufacturers to reduce the overall emissions and thus contributing to environment protection.

Key Features

  • Integrated 105 dB D/A conversion
  • I2 S & TDM digital input (3.3/1.8 V)
  • Input sampling frequency: 44.1kHz, 48 kHz, 96 kHz, 192 kHz
  • Step-up driver included
  • EMI control for FM/AM compatibility
  • Dithering possibility
  • Capable to operate down to 6 V (e.g."start-stop")
  • 6 V - 35 V operating range (RL = 8 Ω)
  • Low component count output low-pass filter
  • Output low-pass filter included in the feedback
  • Low radiation function (LRF)
  • High output power capability
    • 2 x 80 W/4 Ω @ 25 V, 1 kHz, 10 % THD
    • 2 x 120 W/4 Ω @ 30 V, 1 kHz, 10 % THD
    • 1 x 150 W/2 Ω @ 25 V, 1 kHz, 10 % THD
  • Full I2 C bus driving (3.3/1.8 V):
    • I2 C bus digital diagnostics (including DC and AC load detection); AC and DC loudspeaker diagnostic
  • Very flexible fault detection through integrated diagnostic
  • Protected against several kinds of misconnections
  • Offset detector (play or mute mode)
  • Two independent short circuit protections
  • Clipping detector
  • C-MOS compatible enable pin (3.3/5 V)
  • ESD protection
  • Package: TQFP64 exposed pad up

设计

技术文档

产品规格
Description Version Size
DB2074 DB2074: 2 x 180 W / 1 x 300 W PWM digital input power amplifier with built-in diagnostics features and step-up driver 1.0 248 KB

出版刊物和宣传资料

宣传册
Description Version Size
FDA series 1.0 2 MB
FDA801 and FDA801B Full digital audio amplifiers for car infotainment systems 1 MB
选型指南
Description Version Size
Power amplifiers and voltage regulators 750 KB
支持和社区



样片和购买

型号 Marketing Status Quantity Unit Price (US$) * Package Packing Type Operating Temperature (°C) (min) Operating Temperature (°C) (max) ECCN (EU) ECCN (US) Country of Origin More info Order from ST Order from Distributors
FDA2100LV-T Active 1000 7 TQFP 64 10x10x1.0 Tape And Reel -40 105 NEC EAR99 MALAYSIA MORE INFO
FDA2100LV Active 1000 7 TQFP 64 10x10x1.0 Tray -40 105 NEC EAR99 MALAYSIA MORE INFO
test

(*) Suggested Resale Price per unit (USD) for BUDGETARY USE ONLY. For quotes, prices in local currency, please contact your local ST Sales Office  or our Distributors

质量和可靠性

型号 Marketing Status Package Grade RoHS Compliance Grade Material Declaration**
FDA2100LV-T ActiveTQFP 64 10x10x1.0AutomotiveEcopack2 0
FDA2100LV ActiveTQFP 64 10x10x1.0AutomotiveEcopack2 0
test

(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.

×