4x50W low voltage operation PWM digital input power amplifier with I2C diagnostics

The FDA450LV is a new BCD- SOI (silicon on insulation) technology QUAD BRIDGE class D amplifier, specially intended for car radio applications.

Thanks to the technology used, it is possible to integrate a high performance D/A converter together with powerful MOSFET outputs in class D, to get an outstanding efficiency compared with the standard class AB.

The integrated D/A converter allows to reach outstanding performances (110 dB S/N ratio with 108 dB of dynamic range). The feedback loop includes the output L-C low-pass filter, allowing superior frequency response linearity and lower distortion independently of the inductor and capacitor quality.

FDA450LV is fully configurable through I2C bus interface and integrates a full diagnostics array specially intended for automotive applications.

Thanks to the solutions implemented to solve the EMI problems, the device is conceived to be used in the standard single DIN car-radio box together with the tuner.

The possibility to parallelize the outputs allows to drive both 2 Ω and 1 Ω speakers.

Moreover FDA450LV is able to work with power supply as low as 6 V, thus supporting the most recent low voltage ('start-stop') car-makers specification.

Key Features

  • Integrated 108 dB D/A conversion
  • I2 S and TDM digital input (3.3/1.8 V)
  • Input sampling frequency: 44.1 kHz, 48 kHz, 96 kHz, 192 kHz
  • MOSFET power outputs
  • EMI control for FM/AM compatibility
  • EMI compliance at the CEI EN 55025 (2009-10)
  • Dithering possibility
  • Very low external component count filter
  • Output lowpass filter included in the feedback
  • Low radiation function (LRF)
  • Max. output power
    • 4 x 50 W/4 Ω @ 15.2 V, 1 kHz
  • High output power capability
    • 28 W/4 Ω 10 % THD, Vd = 14.4 V
  • Full I2 C bus driving (3.3/1.8 V):
    • Independent front/rear soft play/ mute
    • I2 C bus diagnostics (including DC and AC load detection, test signal internally generated)
  • Very flexible fault detection though integrated diagnostic
  • Offset detector (play or mute mode)
  • Four independent short circuit protection
  • Clipping detector
  • C-MOS compatible enable pin (3.3/5 V)
  • ESD protection
  • 6 V operation (“Start - Stop”)

设计

技术文档

产品规格
Description Version Size
DB1996 DB1996: 4 x 50 W PWM digital input power amplifier with built-in diagnostics features and low voltage operation 2.0 225 KB

出版刊物和宣传资料

宣传册
Description Version Size
Car-audio power amplifiers 1.0 1 MB
FDA series 1.0 2 MB
FDA801 and FDA801B Full digital audio amplifiers for car infotainment systems 1 MB
选型指南
Description Version Size
Power amplifiers and voltage regulators 750 KB




样片和购买

型号 Marketing Status Quantity Unit Price (US$) * Package Packing Type Operating Temperature (°C) (min) Operating Temperature (°C) (max) ECCN (EU) ECCN (US) Country of Origin More info Order from ST Order from Distributors
FDA450LV Active 1000 9 TQFP 100 14x14x1.0 Tray -40 85 NEC EAR99 - MORE INFO DISTRIBUTOR AVAILABILITY
FDA450LV-T Active 1000 9 TQFP 100 14x14x1.0 Tape And Reel -40 85 NEC EAR99 - MORE INFO
test

(*) Suggested Resale Price per unit (USD) for BUDGETARY USE ONLY. For quotes, prices in local currency, please contact your local ST Sales Office  or our Distributors

质量和可靠性

型号 Marketing Status Package Grade RoHS Compliance Grade Material Declaration**
FDA450LV ActiveTQFP 100 14x14x1.0AutomotiveEcopack2 0 0
FDA450LV-T ActiveTQFP 100 14x14x1.0AutomotiveEcopack2 0 0
test

(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.

×