ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32

The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.

In addition to provide the same functionalities as the ST-LINK/V2, the ST-LINK/V2-ISOL features digital isolation between the PC and the target application board. It also withstands voltages of up to 1000 Vrms.

STM8 applications use the USB full-speed interface to communicate with the ST Visual Develop (STVD) or ST Visual Program (STVP) software.

STM32 applications use the USB full-speed interface to communicate with Atollic®, IAR, Keil®or TASKING integrated development environments.

Key Features

  • 5 V power supplied by a USB connector
  • USB 2.0 full-speed-compatible interface
  • USB standard A to Mini- B cable
  • SWIM specific features
    • 1.65 V to 5.5 V application voltage supported on SWIM interface
    • SWIM low-speed and high-speed modes supported
    • SWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed
    • SWIM cable for connection to the application via an ERNI standard vertical connector (ref: 284697 or 214017) or horizontal connector (ref: 214012)
    • SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector
  • JTAG/serial wire debugging (SWD) specific features:
    • 1.65 V to 3.6 V application voltage supported on the JTAG/SWD interface and 5 V tolerant inputs
    • JTAG cable for connection to a standard JTAG 20-pin pitch 2.54 mm connector
    • JTAG supported
    • SWD and serial wire viewer (SWV) communication supported
  • Direct firmware update feature supported (DFU)
  • Status LED which blinks during communication with the PC
  • Operating temperature 0 to 50 °C
  • 1000 Vrms high isolation voltage (ST-LINK/V2-ISOL only)

Image

×

设计

技术文档

产品规格
Description Version Size
DB1275 DB1275: ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32 4.0 201 KB
用户手册
Description Version Size
UM1075 UM1075: ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32 7.0 658 KB

硬件资源

Bill of Materials
Description Version Size
ST-LINK/V2 BOM B-01 12 KB
ST-LINK/V2-ISOL BOM B-03 12 KB

法律

许可协议
Description Version Size
Evaluation products license agreement 1.0 125 KB

工具和软件

软件
Development Tool Software

样片和购买

型号 General Description Specific features RoHS Compliance Grade Marketing Status Unit Price (US$) * Material Declaration Quantity Third Party link More info Order from ST Order from Distributors
ST-LINK/V2-ISOL ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32 With digital isolation Ecopack1 Active 77.18 - 1 - MORE INFO 直接购买 Add to cart DISTRIBUTOR AVAILABILITY
ST-LINK/V2 ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32 - Ecopack1 Active 20.83 - 1 - MORE INFO 直接购买 Add to cart DISTRIBUTOR AVAILABILITY
test

(*) Suggested Resale Price per unit (USD) for BUDGETARY USE ONLY. For quotes, prices in local currency, please contact your local ST Sales Office  or our Distributors

质量和可靠性

型号 Marketing Status Package Grade RoHS Compliance Grade Material Declaration**
ST-LINK/V2-ISOL ActiveCARDIndustrialEcopack1
ST-LINK/V2 ActiveCONTRACTSIndustrialEcopack1
test

(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.

×