IO-Link communication master transceiver IC

The L6360 is a monolithic IO-Link master port compliant with PHY2 (3-wire) supporting COM1 (4.8 kbaud), COM2 (38.4 kbaud) and COM3 (230.4 kbaud) modes. The C/QO output stage is programmable: high-side, low-side or push-pull; also cut-off current, cut-off current delay time, and restart delay are programmable. Cut-off current and cut-off current delay time, combined with thermal shutdown and automatic restart, protect the device against overload and short-circuit. C/QO and L+ output stages are able to drive resistive, inductive and capacitive loads. Inductive loads up to 10 mJ can be driven. Supply voltage is monitored and low voltage conditions are detected. The L6360 transfers, through the PHY2(C/QO pin), data received from a host microcontroller through the USART (IN C/QO pin), or to the USART (OUT C/QI pin) data received from PHY2 (C/QI pin). To enable full IC control, configuration and monitoring (i.e. fault conditions stored in the status register), the communication between the system microcontroller and the L6360 is based on a fast mode 2-wire I2C. The L6360 has nine registers to manage the programmable parameters and the status of the IC. Monitored fault conditions are: L+ line, overtemperature, C/Q overload, linear regulator undervoltage, and parity check. Internal LED driver circuitries, in open drain configuration, provide two programmable sequences to drive two LEDs.

Key Features

  • Supply voltage from 18 V to 32.5 V
  • Programmable output stages: high-side, low-side or push-pull (< 2 Ω)
  • Up to 500 mA L+ protected high-side driver
  • COM1, COM2 and COM3 mode supported
  • Additional IEC61131-2 type 1 input
  • Short-circuit and overcurrent output protection through current limitation and programmable cut-off current
  • 3.3 V / 5 V, 50 mA linear regulator
  • 5 mA IO-Link digital input
  • Fast mode I2 C for IC control, configuration and diagnostic
  • Diagnostic dual LED sequence generator and driver
  • 5 V and 3.3 V compatible I/Os
  • Overvoltage protection (> 36 V)
  • Overtemperature protection
  • ESD protection
  • Miniaturized VFQFPN 26L (3.5x5x1 mm) package


0 下载



Description Version Size
DS8900 DS8900: IO-Link communication master transceiver IC 6.0 2 MB
Description Version Size
AN4075 AN4075: STEVAL-IFP016V2 IO-Link communication master transceiver demonstration board 1.0 409 KB


Description Version Size
L6360 and L6362A: A smart way to drive industrial sensors and actuators 1.0 906 KB


Description Version Size
L6360 and L6362A: Embracing the Industry 4.0 revolution 07.2017 269 KB
Description Version Size
Intelligent power switches (IPS) 11.2017 3 MB
Description Version Size
Brochure Power management guide 09.2017 4 MB
IO-Link products solutions brochure 1.0 491 KB


Related Applications


型号 Package Packing Type Marketing Status Unit Price (US$) * Quantity ECCN (EU) ECCN (US) Country of Origin More info Order from ST Order from Distributors
L6360 VFDFPN 26 3.5x5 Tray Active 1.791 1000 NEC EAR99 ITALY MORE INFO No availability reported, please contact our Sales office
L6360TR VFDFPN 26 3.5x5 Tape And Reel Active 1.897 1000 NEC EAR99 ITALY MORE INFO 获取样片 Add to cart DISTRIBUTOR AVAILABILITY

(*) Suggested Resale Price per unit (USD) for BUDGETARY USE ONLY. For quotes, prices in local currency, please contact your local ST Sales Office  or our Distributors


型号 Marketing Status Package Grade RoHS Compliance Grade Material Declaration**
L6360 ActiveVFDFPN 26 3.5x5IndustrialEcopack2 0 0
L6360TR ActiveVFDFPN 26 3.5x5IndustrialEcopack2 0 0

(**) The Material Declaration forms available on may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.