ST Life.augmented


Quad ±90 V, ±2 A, 3/5 levels, high-speed ultrasound pulser
  • active Active

This monolithic, high-voltage, high-speed pulser generator features four independent channels. It is designed for medical ultrasound imaging applications, but it can also be used for driving other piezoelectric, capacitive or MEMS based transducers. The STHV748 comprises a controller logic interface circuit, level translators, MOSFET gate drivers, noise blocking diodes, and high-power P-channel and N-channel MOSFETs as the output stage for each channel, clamping-to-ground circuitry, anti-leakage, anti-memory effect block, thermal sensor, and a T/R switch which guarantees an effective decoupling during the transmission phase. Moreover, the STHV748 includes self-biasing and thermal shutdown blocks. Each channel can support up to five active output levels with two half bridges. The output stage of each channel is able to provide ±2 A peak output current. In order to reduce power dissipation during continuous wave mode, a dedicated half bridge is available and the peak current is limited to 0.6 A.

pdf Please read
Errata Sheet
pdf データシート

Key Features

  • 0 to ±90 V output voltage
  • Up to 20 MHz operating frequency
  • Embedded low-power, floating high-voltage drivers (external voltage rails can be also used)
  • Mode operations:
  • 3/5-levels output waveform
  • ±2 A source and sink current
  • Down ≤ 20 ps jitter
  • Anti-cross conduction function
  • Low 2nd harmonic distortion
  • Fully integrated clamping-to-ground function
  • 8 Ω synchronous active clamp
  • Anti-leakage on output node
  • Dedicated half bridge for continuous wave (CW) operations
  • ≤ 0.1 W power consumption
  • ±0.6 A source and sink current
  • 205 fs RMS jitter [100 Hz-20 kHz]
  • Fully integrated T/R switch
  • 13.5 Ω on resistance
  • HV MOS topology to minimize current consumption
  • Up to 300 MHz BW
  • Receiver multiplexing function
  • 2.4 V to 3.6 V CMOS logic interface
  • Auxiliary integrated circuits
  • Noise blocking diodes
  • Fully self-biasing architecture
  • Anti-memory effect for all internal HV nodes
  • Thermal protection
  • Standby function
  • Latch-up free due to HV SOI technology
  • Very few external passive components needed




Technical Documentation

Product Specifications

Description Version Size
DS6123: Quad ± 90 V, ± 2 A, 3/5 levels, high speed ultrasound pulser
5.0 808 KB

Application Notes

Description Version Size
AN3240: Ultrasound HV pulser demonstration board
1.1 1,227 KB
AN3961: STEVAL-IME003V1 demonstration board based on the STHV748 ultrasound pulser
3.0 2,100 KB

User Manual

Description Version Size
UM1083: How to upgrade the waveforms on STEVAL-IME003V1, STEVAL-IME008V1 and STEVAL-IME009V1 evaluation boards
2.0 578 KB

Related Tools and Software

Related Tools and Software

製品型名 Description
STEVAL-IME003V1 Demonstration board based on the STHV748 high voltage pulser
STEVAL-IME011V1 Discover STHV748 high voltage pulser

Publications and Collaterals


Description Version Size
Ultrasound pulser ICs - Monolithic, high-voltage and high-speed pulse generators
1.0 1,243 KB


Description Version Size
Semiconductor solutions for healthcare applications
1.0 665 KB

サンプル& 購入

製品型名 Marketing StatusPackagePacking TypeOperating Temperature (min) Operating Temperature (max) Automotive GradeOrder From STUnit Price (US$)*
Distributor AvailabilityRoHS Compliance GradeDownload
Material Declaration**
STHV748QTRActiveVFQFPN2 64 9x9x1.0Tray-40125_-Distributor reported inventory date: 2016-02-28
Distributor NameRegionStockMin. order
ARROWOrder NowAMERICA11601560

(*)ユニット当たりの推奨再販価格(米ドル建て)は、あくまで予算的な参考情報としてご利用下さい。現地通貨ベースでのお見積り、価格については 弊社セールスオフィス もしくは 販売代理店 にお問合せ下さい。
(**)弊社ホームページで入手できるMaterial Declaration(材料宣誓書)のフォームは、各パッケージ・タイプで最も一般的に使用されるパッケージに基づいた包括的な文書です。そのため、特定のデバイスについて100%正確ではない可能性があります。特定のデバイスに関する情報については、 弊社セールスオフィス にお問合せ下さい。