STEVAL-MKI006V1
MEMS 3-axis - 2g/8g digital output low power linear accelerometer evaluation board based on LIS302DL
Data Brief
Features
Graphical user interface USB connector Control switches MEMS sensor LED indicators ST7-USB microcontroller
Description
The STEVAL-MKI006V1 is an evaluation kit designed to provide the user with a complete, ready-to-use platform for evaluation of the LIS302DL, a low power 3-axis linear accelerometer with digital output. The device includes a sensing element and an IC interface capable of translating information from the sensing element into a measured signal that can be used for external applications. In addition to the MEMS sensor, the evaluation board utilizes an ST7-USB microcontroller which functions as a bridge between the sensor and the PC, on which it is possible to use the graphical user interface (GUI) included with the kit or dedicated software routines for customized applications.
STEVAL-MKI006V1
October 2007
Rev 1
1/4
www.st.com 4
For further information contact your local STMicroelectronics sales office.
STEVAL-MKI006V1
D1 R1 180R
J1 1 V+ 2 DM 3 DP 4 GND Vddf C1 10u + C5 100n + C4 C2 100n 4u7 R2 100R USB_B
VCC
sck
R3 100R
Vddf
1 2 D4 3 4 R G 5
SCL
14
U1 LI S302DL
Vdd_I O GND _I O HV Test _SE GND 6 VD D Gled Rled
7 CS
SDA
13 mosi
SDO
12 miso
Reserve d
11
nRES i ccsel ET
TESTEN
10
i ccdata i cccl k
oscout osci n
I nt 2
9
I NT2
R4 100R
D2
OSCOU T OSCI N V ss2 V ssa V dda V dd2 I CCD AT A I CCCL K U SBEN A I N1 A I N0 SD A SCL RES T E V pp/I CCSEL PWM 1
64 63 62 61 60 59 58 57 56 55 54 53 52 51 50 49
U2 ST7265X_TQFP64
I nt 1
8
I NT1
D3
R5 100R 48 47 46 45 44 43 42 41 40 39 38 37 36 35 34 33
cs_pad
R6 1K5 Vddf Rled Gled
C8 47n C9 220n 10u
+ C10
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 UV ss UD M UD P UV cc UV dd Vddf Vssf PE5 PE6 PE7 PB0 PB1 PB2 PB3 PB4 PB5
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
PB6 PB7 PA 0 PA 1 PA 2 PA 3 PA 4 PA 5 PA 6 PA 7 SS M I SO M OSI SCK V dd1 V ss1
PWM 0 AI N6 AI N5 AI N4 AI N3 AI N2 OCM P2 OCM P1 PD3 PD2 PD1 PD0 PC7 PC6 PC5 PC4
osci n Yoscm1 Cosc1 33p 12MH z
oscout
Cosc2 33p
CS1
VCC
cs_pad I N T1 I N T2
V ddf mi so mosi sck
Board schematic
C3 4u7 R7 10K R8 10K
+
C6 100n
J2
1 3 5 7 9
I N T2 CS1
sck mi so mosi I N T1 cs_pad
VCC
2 4 6 8 10
iccdata icccl k nRESET iccsel I CP TP1 SW2 SW3
7 6 5 4 3 2 1
Scheme
Riccsel1 10K
SW1 NReset
C7 100n
J3 SPI
Board schematic
Figure 1.
2/4
1
STEVAL-MKI006V1
Revision history
2
Revision history
Table 1.
Date 16-Oct-2007
Document revision history
Revision 1 Initial release Changes
3/4
STEVAL-MKI006V1
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
4/4
|
