LDR1833 LDR2533
Very low drop dual voltage regulator
Features
Output current 1 up to 500 mA Output current 2 up to 1.0 A Low dropout voltage 1 (0.3 V @ IO = 500 mA) Low dropout voltage 2 (0.4 V @ IO = 1 A) Very low supply current (typ. 50 A in OFF mode, 1.6 mA max in ON mode) Logic-controlled electronic shutdown output voltage availability for each regulator: 1.8 V, 2.5 V, 3.3 V Internal current and thermal limit Stable with low value (min. 4.7 F) and low ESR output capacitors Supply voltage rejection: 70 dB (typ.) Temperature range (- 40 C to 125 C)
PPAK
Description
The LDR1833, LDR2533 is a very low drop dual voltage regulator available in PPAK. The very low drop-voltage (0.5 V) and the very low supply current make it particularly suitable for low noise and low power applications such as PDA, Microdrive and other data storage applications while the used high voltage technology makes this device suitable for consumer applications such as Monitors and Set-top-box. For each VO a shutdown logic control function is available (TTL compatible) to decrease the total power consumption.
Table 1.
Device summary
Output voltages Order codes VO1 LDR1833PT-R LDR2533PT-R 1.8 V 2.5 V Rev 3 VO2 3.3 V 3.3 V 1/16
www.st.com 16
April 2008
Contents
LDR1833 - LDR2533
Contents
1 2 3 4 5 6 7 8 Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Pin configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Typical application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Typical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
2/16
LDR1833 - LDR2533
Diagram
1
Figure 1.
Diagram
Block diagram
VI1
POWER 1
VO1
INH1
START UP 1
BAND GAP 1
D RIVER 1
+ ER R OR AMPLIFIER 1
TH ER MAL 1
TH ER MAL 2
+ ER ROR AMPLIFIER 2
INH2
STAR T UP 2
BAND GAP 2
D R IV ER 2
VI2
P OWER 2
VO2
3/16
Pin configuration
LDR1833 - LDR2533
2
Figure 2.
Pin configuration
Pin connections (top view)
PPAK
Table 2.
Pin n 3 2 1 4 5
Pin description
Symbol GND VI1 VI2 VO1 VO2 Ground pin Input 1 supply pin. Bypass with a 2.2F capacitor to GND Input 2 supply pin. Bypass with a 2.2F capacitor to GND Output 1 pin. Bypass with a 4.7F capacitor to GND port Output 2 pin. Bypass with a 4.7F capacitor to GND port Name and function
4/16
LDR1833 - LDR2533
Maximum ratings
3
Table 3.
Maximum ratings
Absolute maximum ratings
Parameter DC input voltage Shutdown voltage Output current Power dissipation Storage temperature range Operating ambient temperature range Value -0.3 to 15 -0.3 to 15 Internally limited Internally limited -50 to +150 -40 to +125 C C Unit V V
Symbol VI1 & VI2 INH IO PD TSTG TA
Note:
Absolute maximum ratings are those values beyond which damage to the device may occur. Functional operation under these condition is not implied. Thermal data
Parameter Thermal resistance junction-case PPAK 8 Unit C/W
Table 4.
Symbol RthJC
5/16
Typical application
LDR1833 - LDR2533
4
Figure 3.
Typical application
Typical application circuit
6/16
LDR1833 - LDR2533
Electrical characteristics
5
Table 5.
Electrical characteristics
Electrical characteristics (VI1 = VO1 + 2 V, VI2 = VO2 + 2 V, VINH1 = VINH2 = 2.5 V, CI1,2 = 2.2 F, CO1,2 = 4.7 F, IO1 = IO2 = 10 mA, TA = -40 C to 125 C, unless otherwise specified. Typical values are referred at TA = 25 C)
Parameter Output voltage 1 Output voltage 2
(1) (1)
Symbol VO1 VO2
Test conditions
Min. -5 -5
Typ. VNOM1 VNOM2 0.3 0.4 15 15 10 60 2 1 30
Max. +5 +5 0.7 0.8 30 40
Unit %V %V V V mV mV mV mV mA mA mA mA A V
VDROP1 Dropout voltage 1 VDROP2 Dropout voltage 2 VO1 VO2 VO1 VO2 ISTOT IS IQMAX ISC1 ISC2 VINH-H VINH-L IINH SVR eN Line regulation 1 Line regulation 2 Load regulation 1 Load regulation 2
IO1 = 500mA IO2 = 1A VI1 = VO1+2V to VO1+7V, IO = 250mA VI2 = VO2+2V to VO2+7V, IO = 500mA VI1 = VO1+2V, IO1 = 10 to 500mA VI2 = VO2+2V, IO2 = 10mA to 1A IO1 = IO2 = NO LOAD NO LOAD IO1 = 500mA, IO2 = 1A TA = 25 TA = 25 500 1 2.4
Total supply current 1 channel supply current Quiescent current Shor t circuit current 1 Shor t circuit current 2 Enable voltage HIGH Enable voltage LOW Enable pin current Supply voltage rejection (2) RMS output noise (2)
800 1.6
0.8 VINH = 5V VI1,2 = VO1,2 +3V 1V, IO1,2 = 10 mA, f = 120Hz Bandwidth of 10Hz to 100kHz 6 70 0.003
V A dB %VO
1. This test is not performed for VO < 2.5 V. 2. Guaranteed by design, but not tested in production
7/16
Typical characteristics
LDR1833 - LDR2533
6
Figure 4.
Typical characteristics
(unless otherwise specified TJ = 25 C) Dropout voltage (VO1) vs Figure 5. temperature Dropout voltage (VO2) vs temperature
Figure 6.
Dropout voltage (VO1) vs temperature
Figure 7.
Dropout voltage (VO2) vs temperature
Figure 8.
Line regulation (VO1) vs temp.
Figure 9.
Load regulation (VO1) vs temp.
8/16
LDR1833 - LDR2533
Typical characteristics
Figure 10. Line regulation (VO2) vs temperature
Figure 11. Load regulation (VO2) vs temperature
Figure 12. Short circuit current (VO1) vs drop voltage
Figure 13. Short circuit current (VO2) vs drop voltage
Figure 14. Inhibit voltage vs temperature
Figure 15. One channel inhibit current vs temperature
9/16
Typical characteristics
LDR1833 - LDR2533
Figure 16. Supply voltage rejection vs (VO1) temperature
Figure 17. Supply voltage rejection vs (VO2) temperature
Figure 18. Supply voltage rejection (VO1) vs frequency
Figure 19. Supply voltage rejection (VO2) vs frequency
Figure 20. Maximum total quiescent current vs Figure 21. Total supply current vs temperature temperature
10/16
LDR1833 - LDR2533 Figure 22. Quiescent current (VO1) vs output current
Typical characteristics Figure 23. Quiescent current (VO2) vs output current
Figure 24. Thermal protection vs VO1
Figure 25. Load transient
CI1,2=1F, CO1,2=2.2F, VINH1,2=2.5V, VI1=4.5V, VI2=5.3V, IO1=5mA to 0.5A, IO2=5mA to 1A, tRISE=tFALL=4.2s
Figure 26. Line transient VO1,2
Figure 27. Start up transient VO1
CI1,2=0, CO1,2=2.2F, VI1=4.4 to 10.4V, VI2=5.3 to 11.3V, IO1=0.25A, IO2=0.5A, tRISE=tFALL=4.4s
VI1=1.1 to 8.5V, VI2=1.2 to 9.8V, IO1=0.25A, IO2=0.5A, tRISE=5s
11/16
Package mechanical data
LDR1833 - LDR2533
7
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK packages. These packages have a lead-free second level interconnect. The category of second Level Interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com.
12/16
LDR1833 - LDR2533
Package mechanical data
PPAK mechanical data
mm. Dim. Min. A A1 A2 B B2 C C2 D D1 E E1 e G G1 H L2 L4 L5 L6 0.6 1 2.8 4.9 2.38 9.35 0.8 6.4 4.7 1.27 5.25 2.7 10.1 1 1 0.023 0.039 0.110 0.193 0.093 0.368 0.031 2.2 0.9 0.03 0.4 5.2 0 .45 0.48 6 5.1 6.6 0.252 0.185 0.050 0.206 0.106 0.397 0.039 0.039 Typ. Max. 2.4 1.1 0.23 0.6 5.4 0.6 0.6 6.2 Min. 0.086 0.035 0.001 0.015 0.204 0.017 0.019 0.236 0.201 0.260 Typ. Max. 0.094 0.043 0.009 0.023 0.212 0.023 0.023 0.244 inch.
0078180-E
13/16
Package mechanical data
LDR1833 - LDR2533
Tape & reel DPAK-PPAK mechanical data
mm. Dim. Min. A C D N T Ao Bo Ko Po P 6.80 10.40 2.55 3.9 7.9 6.90 10.50 2.65 4.0 8.0 12.8 20.2 60 22.4 7.00 10.60 2.75 4.1 8.1 0.268 0.409 0.100 0.153 0.311 0.272 0.413 0.104 0.157 0.315 13.0 Typ. Max. 330 13.2 0.504 0.795 2.362 0.882 0.2.76 0.417 0.105 0.161 0.319 0.512 Min. Typ. Max. 12.992 0.519 i nch.
14/16
LDR1833 - LDR2533
Revision history
8
Table 6.
Date
Revision history
Document revision history
Revision 2 3 Changes Modified: tables 1, 3, 5 and figures 3, 6, 10, 11, 14, 17, 22, 23. Modified: Table 1 on page 1.
03-Aug-2004 15-Apr-2008
15/16
LDR1833 - LDR2533
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
2008 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
16/16
|
