TYN612M
12 A SCR
Main features
Symbol IT(RMS) VDRM/VRRM IGT (min / max) Value 12 600 1.5 / 5 Unit A
A
G K A
V mA
K A G A K G
Description
The TYN612M SCR is suitable to fit modes of control found in applications such as voltage regulation circuits for motorbikes, overvoltage crowbar protection, motor control circuits in power tools and kitchen aids, inrush current limiting circuits, capacitive discharge ignition. The insulated fullpack package allows a back to back configuration. Table 1.
Symbol IT(RMS) RMS on-state current (180 conduction angle) Average on-state current (180 conduction angle) Non repetitive surge peak on-state current I²t Value for fusing Critical rate of rise of on-state current IG = 2 x IGT , tr 100 ns Peak gate current Average gate power dissipation Storage junction temperature range Operating junction temperature range Maximum peak reverse gate voltage
TO-220AB TYN612MRG
TO-220FPAB TYN612MFP
Order codes
Part Numbers TYN612MRG TYN612MFP Marking TYN612M TYN612MFP
Absolute ratings (limiting values)
Parameter TO-220AB TO-220FPAB TO-220AB TO-220FPAB tp = 8.3 ms tp = 10 ms tp = 10 ms F = 60 Hz tp = 20 s Tc = 105 C Tc = 70 C Tc = 105 C Tc = 70 C Tj = 25 C Tj = 25 C Tj = 125 C Tj = 125 C Tj = 125 C Value 12 A 12 8 A 8 125 A 120 72 50 4 1 - 40 to + 150 - 40 to + 125 5 A2S A/s A W C V Unit
IT(AV)
ITSM I²t dI/dt IGM PG(AV) Tstg Tj VRGM
April 2007
Rev 4
1/8
www.st.com 8
Characteristics
TYN612M
1
Table 2.
Symbol IGT
Characteristics
Electrical characteristics (Tj = 25 C, unless otherwise specified)
Test Conditions VD = 12 V RL = 140 MIN. MAX. MIN. VGT VD = 12 V RL = 140 TYP. MAX. VGD IH IL dV/dt VTM Vt0 Rd IDRM IRRM VD = VDRM IT = 500 mA IG = 1.2 IGT VD = 67 % VDRM ITM = 24 A Gate open Tj =125 C Tj = 25 C Tj = 125 C Tj = 125 C Tj = 25 C Tj = 125 C RL = 3.3 k Gate open Tj = 125 C MI N . MAX. MAX. MIN. MAX. MAX. MAX. MAX. 2 mA Value 1.5 mA 5 0.5 0.7 1.3 0.2 20 40 50 1.6 0.85 30 5 V mA mA V/s V V m A V Unit
tp = 380 s
Threshold voltage Dynamic resistance VDRM = VRRM
Table 3.
Symbol Rth(j-c)
Thermal resistance
Parameter TO-220AB Junction to case (DC) TO-220FPAB TO-220AB Junction to ambient (DC) TO-220FPAB 55 4.5 55 C/W Value 1.3 C/W Unit
Rth(j-a)
Figure 1.
Maximum average power dissipation versus average on-state current
Figure 2.
Average and D.C. on-state current versus case temperature (TO-220AB)
D.C.
P(W)
12 11 10 9 8 7 6 5 4 3 2 1 0 0 1 2 3 4 5 6 7 8 9
= 180
IT(AV)(A)
14 13 12 11 10 9 8 7 6 5 4 3 2
= 180
IT(AV)(A)
1 0 0 25 50
TC(C)
75 100 125
2/8
TYN612M
Characteristics
Figure 3.
Average and D.C. on-state current versus case temperature (TO-220FPAB)
D.C.
Figure 4.
Relative variation of thermal impedance versus pulse duration (TO-220AB)
IT(AV)(A)
14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 0 25 50 75 100 125
= 180
K=[Zth/Rth]
1.E+00
Rth(j-c)
1.E-01
Rth(j-a)
TC(C)
1.E-02 1.E-03 1.E-02 1.E-01
tp(s)
1.E+00 1.E+01 1.E+02 1.E+03
Figure 5.
Relative variation of thermal impedance versus pulse duration (TO-220FPAB)
Figure 6.
Relative variation of gate trigger current, holding current, latching current and gate trigger voltage versus junction temperature (typical values)
K=[Zth/Rth]
1.E+00
IGT, IH, IL, VGT [T j] / IGT, IH, IL, VGT [T j=25C]
2.4 2.2 2.0
Rth(j-c)
1.8 1.6 1.4
IH & IL
IGT
1.E-01
Rth(j-a)
1.2 1.0 0.8 0.6 0.4 0.2 0.0
1.E+01 1.E+02 1.E+03
V GT
tp(s)
1.E-02 1.E-03 1.E-02 1.E-01 1.E+00
Tj(C)
-40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 130
Figure 7.
Surge peak on-state current versus Figure 8. number of cycles
Non-repetitive surge peak on-state current for a sinusoidal pulse with width tp < 10 ms, and corresponding values of I²t
ITSM(A)
130 120 110 100 90 80 70 60 50 40 30 20 10 0 1 10 100 1000
Repetitive TC=105C Non repetitive Tj initial=25C
t =10m s p
ITSM(A), I2t (A2s)
1000
Tj initial=25C ITSM
O ne cycl e
100
I2t
Number of cycles
10 0.01 0.10
tP(ms)
1.00 10.00
3/8
Ordering information scheme
TYN612M
Figure 9.
ITM(A)
100.00
On-state characteristics (maximum values)
Tj=125C Tj max.: Vt0=0.85V Rd=0.030
10.00
Tj=25C
1.00
VTM(V)
0.10 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0
2
Ordering information scheme
TYN 6 12 M FP RG
Standard SCR Voltage 6 = 600V Current 12 = 12A Sensitivity M = 5mA Package FP = TO-220FPAB Blank = TO-220AB Packing mode RG = Tube (TO-220AB) Blank = Tube (TO-220FPAB)
4/8
TYN612M
Package information
3
Package information
Epoxy meets UL94, V0 TO-220AB dimensions
Dimensions Ref. Millimeters Min. A
B ØI L F A I4 l3 a1 l2 c2 b2 C
Table 4.
Inches Min. Typ. Max. 0.625 0.147
Typ.
Max.
15.20 3.75 13.00 10.00 0.61 1.23 4.40 0.49 2.40 2.40 6.20 3.75
15.90 0.598
a1 a2 B b1 b2 C c1 c2
14.00 0.511 10.40 0.393 0.88 0.024 1.32 0.048 4.60 0.173 0.70 0.019 2.72 0.094 2.70 0.094 6.60 0.244 3.85 0.147
0.551 0.409 0.034 0.051 0.181 0.027 0.107 0.106 0.259 0.151
a2
e F
M
b1 e
c1
ØI I4 L l2 l3 M
15.80 16.40 16.80 0.622 0.646 0.661 2.65 1.14 1.14 2.60 2.95 0.104 1.70 0.044 1.70 0.044 0.102 0.116 0.066 0.066
5/8
Package information Table 5. TO-220FPAB Dimensions
Dimensions Ref. Millimeters Min. A
A H B
TYN612M
Inches Min. 0.173 0.098 0.098 0.018 0.030 0.045 0.045 0.195 0.094 0.393 Max. 0.181 0.106 0.108 0.027 0.039 0.067 0.067 0.205 0.106 0.409
Max. 4.6 2.7 2.75 0.70 1 1.70 1.70 5.20 2.7 10.4
4.4 2.5 2.5 0.45 0.75 1.15 1.15 4.95 2.4 10
B D E
Dia L6 L2 L3 L5 F1 L4 F2 D L7
F F1 F2 G G1 H L2
E
16 Typ. 28.6 9.8 2.9 15.9 9.00 3.00 30.6 10.6 3.6 16.4 9.30 3.20
0.63 Typ. 1.126 0.386 0.114 0.626 0.354 0.118 1.205 0.417 0.142 0.646 0.366 0.126
F G1 G
L3 L4 L5 L6 L7 Dia.
In order to meet environmental requirements, ST offers these devices in ECOPACK packages. These packages have a lead-free second level interconnect. The category of second level interconnect is marked on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com.
6/8
TYN612M
Ordering information
4
Ordering information
Ordering type TYN612MRG TYN612MFP Marking TYN612M TYN612MFP Package TO-220AB TO-220AB Weight 2.3 g 2.0 g Base qty Delivery mode 50 50 Tube Tube
5
Revision history
Date Sep-2002 10-Fev-2005 11-Apr-2007 17-Apr-2007 Revision 1A 2 3 4 Last update. TO-220FPAB package added. Reformatted to current standards. Added typical and minimum values for VGT in Table 2. Added VGT curve in Figure 6. Description of Changes
7/8
TYN612M
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
8/8
|
