TSV911-TSV912-TSV914
Rail-to-rail input/output 8 MHz operational amplifiers
Features
Rail-to-rail input and output Wide bandwidth Low power consumption: 1.1 mA max. Unity gain stability High output current: 35 mA Operating from 2.5 V to 5.5 V Low input bias current, 1 pA typ ESD internal protection 5 kV Latch-up immunity
Pin connections (top view)
SOT23-5
Output VDD Non Inverting Input 1 2 3 4 Inverting Input 5 VCC
SO-8 (single)
N.C. Inverting Input 1 2 3 4 _ + 8 7 6 5 N.C. VCC Output N.C.
Applications
Batter y-powered applications Por table devices Signal conditioning Active filtering Medical instrumentation Automotive applications
Non Inverting Input VDD
MiniSO-8, SO-8 (dual)
Output 1 Inverting Input 1 Non Inverting Input 1 VDD 1 2 3 4 _ + _ + 8 7 6 5 VCC Output 2 Inverting Input 2 Non Inverting Input 2
Description
The TSV911/2/4 family of single, dual and quad operational amplifiers offers low voltage operation and rail-to-rail input and output. This family features an excellent speed/power consumption ratio, offering an 8 MHz gainbandwidth product while consuming only 1.1 mA max at 5 V supply voltage. These op-amps are unity gain stable for capacitive loads up to 200 pF. They also feature an ultra-low input bias current. These characteristics make the TSV911/2/4 family ideal for sensor interfaces, battery-supplied and portable applications, as well as active filtering.
SO-14, TSSOP14
Output 1 Inverting Input 1 Non Inverting Input 1 VCC Non Inverting Input 2 Inverting Input 2 Output 2 1 2 3 4 5 6 7 + _ + _ _ + _ + 14 Output 4 13 Inverting Input 4 12 Non Inverting Input 4 11 VDD 10 Non Inverting Input 3 9 8 Inverting Input 3 Output 3
Februar y 2008
.
Rev 3
1/18
www.st.com 18
Absolute maximum ratings and operating conditions
TSV911-TSV912-TSV914
1
Absolute maximum ratings and operating conditions
Table 1.
Symbol VCC Vid Vin Tstg Supply voltage
(1) (2)
Absolute maximum ratings (AMR)
Parameter Value 6 VCC VDD-0.2 to VCC+0.2 -65 to +150 250 125 190 103 100 81 40 39 31 32 150 5 300 1500 750 500 200 Unit V V V C
Differential input voltage Input voltage
(3)
Storage temperature Thermal resistance junction to ambient(4) (5) SOT23-5 SO-8 MiniSO-8 SO-14 TSSOP14 Thermal resistance junction to case(4) (5) SOT23-5 SO-8 MiniSO-8 SO-14 TSSOP14 Maximum junction temperature HBM: human body MM: machine model(6) model(8) model(7)
Rthja
C/W
Rthjc
C/W
Tj
C kV V
ESD
CDM: charged device SOT23-5, SO-8, MiniSO-8 TSSOP14 SO-14 Latch-up immunity
V
mA
1. All voltage values, except differential voltage are with respect to network ground terminal. 2. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal. 3. VCC-Vin must not exceed 6V. 4. Short-circuits can cause excessive heating and destructive dissipation. 5. Rth are typical values. 6. Human body model: A 100pF capacitor is charged to the specified voltage, then discharged through a 1.5k resistor between two pins of the device. This is done for all couples of connected pin combinations while the other pins are floating. 7. Machine model: A 200pF capacitor is charged to the specified voltage, then discharged directly between two pins of the device with no external series resistor (internal resistor < 5). This is done for all couples of connected pin combinations while the other pins are floating. 8. Charged device model: all pins and the package are charged together to the specified voltage and then discharged directly to the ground through only one pin. This is done for all pins.
2/18
TSV911-TSV912-TSV914 Table 2.
Symbol VCC Vicm Toper Supply voltage
Absolute maximum ratings and operating conditions
Operating conditions
Parameter Value 2.5 to 5.5 VDD -0.1 to VCC +0.1 -40 to +125 Unit V V C
Common mode input voltage range Operating free air temperature range
3/18
Electrical characteristics
TSV911-TSV912-TSV914
2
Table 3.
Symbol
Electrical characteristics
Electrical characteristics at VCC = +2.5V with VDD = 0V, Vicm = VCC/2, RL connected to VCC/2, full temperature range (unless otherwise specified)(1)
Parameter Conditions Min. Typ. Max. Unit
DC performance Offset voltage TSV91x Vio TSV91xA DVio/DT Iio Iib CMR Avd Input offset voltage drift Input offset current Input bias current T= 25C Tmin < Top < Tmax T= 25C Tmin < Top < Tmax T= 25C Tmin < Top < Tmax T= 25C Tmin < Top < Tmax 58 80 75 0.1 2 1 1 75 89 15 45 18 16 18 16 15 45 32 35 0.78 4.5 7.5 mV 1.5 3 10(2) 100 10(2) 100 40 150 40 150 mA 1.1 mA V/C pA pA dB dB mV mV
Common mode rejection ratio 0V to 2.5V, Vout = 1.25V 20 log (Vic/Vio) Large signal voltage gain RL= 10k Vout= 0.5V to 2V, T= 25C , Tmin < Top < Tmax RL = 10k RL = 600 RL = 10k RL = 600 Vo = 2.5V, T= 25C Tmin < Tamb < Tmax Vo = 0V, T= 25C Tmin < Tamb < Tmax No load, Vout=VCC/2
VCC-VOH High level output voltage VOL Low level output voltage Isink Iout Isource ICC Supply current (per operator)
AC performance GBP Fu m Gm SR en THD+en Gain bandwidth product Unity gain frequency Phase margin Gain margin Slew rate , RL= 2k CL=100pF, f =100kHz, T=25C RL= 2k CL= 100pF, T= 25C , RL= 2k, CL= 100pF, T= 25C RL= 2k, CL= 100pF, T= 25C RL= 2k, CL=100pF, Av=1, T= 25C 8 7.2 45 8 4.5 21 MHz MHz Degrees dB V/s
nV ----------Hz
Equivalent input noise voltage f= 10kHz, T= 25C G=1, f=1kHz, RL=2k, Bw= 22kHz, T=25C, Vicm=(VCC+1)/2, Vout=1.1Vpp
Total harmonic distortion
-
0.001
-
%
1. All parameter limits at temperatures other than 25C are guaranteed by correlation. 2. Guaranteed by design.
4/18
TSV911-TSV912-TSV914 Table 4.
Symbol DC performance Offset voltage TSV91x Vio TSV91xA DVio Iio Iib CMR Avd Input offset voltage drift Input offset current Input bias current T= 25C Tmin < Top < Tmax T= 25C Tmin < Top < Tmax T= 25C Tmin < Top < Tmax T= 25C Tmin < Top < Tmax -
Electrical characteristics
Electrical characteristics at VCC = +3.3V with VDD = 0V, Vicm = VCC/2, RL connected to VCC/2, full temperature range (unless otherwise specified)(1)
Parameter Conditions Min. Typ. Max. Unit
0.1 2 1 1
4.5 7.5 mV 1.5 3 10 100
(2)
V/C pA pA dB dB mV mV
10(2) 100 40 150 40 150 -
Common mode rejection ratio 0V to 3.3V, Vout = 1.65V 20 log (Vic/Vio) Large signal voltage gain RL=10k Vout= 0.5V to 2.8V, T=25C , Tmin < Top < Tmax RL = 10k RL = 600 RL = 10k RL = 600 Vo = 3.3V, T= 25C Tmin < Tamb < Tmax Vo = 0V, T= 25C Tmin < Tamb < Tmax No load, Vout=VCC/2
60 80 75
78 90 15 45
VCC-VOH High level output voltage VOL Low level output voltage Isink Iout Isource ICC Supply current (per operator)
18 16 18 16 -
15 45 32 35 0.8
mA 1.1 mA
AC performance GBP Fu m Gm SR en Gain bandwidth product Unity gain frequency Phase margin Gain margin Slew rate RL= 2k CL= 100pF, f = 100kHz, , T= 25C RL= 2k, CL=100pF, T= 25C RL= 2k CL=100pF, T= 25C , RL= 2k CL=100pF, T= 25C , , RL= 2k CL= 100pF, Av=1, T= 25C 8 7.2 45 8 4.5 21 0.0007 MHz MHz Degrees dB V/s
nV ----------Hz
Equivalent input noise voltage f= 10kHz, T= 25C G=1, f=1kHz, RL=2k, BW= 22kHz, Vicm=(VCC+1)/2, Vout=1.9Vpp, T=25C
THD+en Total harmonic distortion
%
1. All parameter limits at temperatures other than 25C are guaranteed by correlation. 2. Guaranteed by design.
5/18
Electrical characteristics Table 5.
Symbol DC performance Offset voltage TSV91x Vio TSV91xA DVio Iio Iib CMR SVR Avd Input offset voltage drift Input offset current Input bias current T= 25C Tmin < Top < Tmax T= 25C Tmin < Top < Tmax T= 25C Tmin < Top < Tmax T= 25C Tmin < Top < Tmax -
TSV911-TSV912-TSV914
Electrical characteristics at VCC = +5V with VDD = 0V, Vicm = VCC/2, RL connected to VCC/2, full temperature range (unless otherwise specified)(1)
Parameter Conditions Min. Typ. Ma x . Unit
0.1 2 1 1 82 86 91 15 45
4.5 7.5 mV 1.5 3 10 100
(2)
V/C pA pA dB dB dB mV mV
10(2) 100 40 150 40 150 -
Common mode rejection ratio 0V to 5V, Vout = 2.5V 20 log (Vic/Vio) Supply voltage rejection ratio 20 log (VCC/Vio) Large signal voltage gain VCC = 2.5 to 5V RL=10k Vout= 0.5V to 4.5V, T= 25C , Tmin < Top < Tmax RL = 10k RL = 600 RL = 10k RL = 600 Vo = 5V, T=25C Tmin < Tamb < Tmax Vo = 0V, T= 25C Tmin < Tamb < Tmax No load, Vout= 2.5V
62 70 80 75
VCC-VOH High level output voltage VOL Low level output voltage Isink Iout Isource ICC Supply current (per operator)
18 16 18 16 -
15 45 32 35 0.82
mA 1.1 mA
AC performance GBP Fu m Gm SR en Gain bandwidth product Unity gain frequency Phase margin Gain margin Slew rate Equivalent input noise voltage , RL= 2k CL= 100pF, f = 100kHz, T=25C RL = 2k, CL=100pF, T= 25C RL = 2k, CL=100pF, T= 25C RL = 2k, CL=100pF, T= 25C , RL= 2k CL= 100pF, AV = 1, T= 25C f=1kHz, T= 25C f=10kHz, T= 25C G=1, f=1kHz, RL=2k, Bw= 22kHz, T=25C, Vicm=(VCC+1)/2, Vout=3.6Vpp 8 7.5 45 8 4.5 27 21 0.0004 MHz MHz Degrees dB V/s
nV ----------Hz
THD+en Total harmonic distortion
%
1. All parameter limits at temperatures other than 25C are guaranteed by correlation. 2. Guaranteed by design.
6/18
TSV911-TSV912-TSV914
Electrical characteristics
Figure 1.
Input offset voltage distribution at T= 25C
Figure 2.
Input offset voltage distribution at T= 125C
40
140 120
Quantity of parts
Vcc=5V Vicm=2.5V Tamb=25C
Quantity of parts
30
100 80 60 40 20 0 -5
20
10
-4
-3
-2
-1
0
1
2
3
4
5
0 -5
-4
-3
-2
-1
0
1
2
3
4
5
Input offset Voltage (mV)
Input offset Voltage (mV)
Figure 3.
Supply current vs. input common mode voltage at VCC= 2.5V
Figure 4.
Supply current vs. input common mode voltage at VCC= 5V
Figure 5.
Output current vs. output voltage at Figure 6. VCC= 2.5V
Output current vs. output voltage at VCC= 5V
7/18
Electrical characteristics
TSV911-TSV912-TSV914
Figure 7.
Voltage gain and phase vs frequency at VCC= 2.5V and Vicm= 0.5V
200 160 120 80
Figure 8.
Voltage gain and phase vs frequency at VCC= 5.5V and Vicm= 0.5V
50 40 30 20
Gain (dB)
40
PPase e h has
0 -0 1 -0 2 -0 3 -0 4 -0 5 4 10 Vcc=2.5V, Vicm=0.5V Cl=100pF, Rl=2kOhms, Vrl=Vcc/2 Tamb=25C 10
5
0 -0 4 -0 8 - 20 1 - 60 1 10
7
0
-20
-40
5
10
6
10
8
- 00 2
10
4
10 0 1
66
10
5
10 0 6 1
10
77
10
10 0 71
88
10
8
10 0 1
99
10
9
Figure 9.
Phase margin vs.capacitive load
Figure 10. Phase margin vs.output current
80 70 60
Phase Margin ()
Phase Margin ()
50 40 30 20 10 0 Vcc=5V, Cl=100pF Tamb=25C
Vcc=5V, Rl=2kOhms Vrl=2.5V Tamb=25C
-0 2
-0 1
0
10
20
Figure 11. Positive slew rate
6 5 4 3 2 1 0 2.5
Figure 12. Negative slew rate
-6 -5 -4 -3 -2 -1 0 2.5 Vin : from 0.5V to Vcc-0.5V SR : calculated from 10% to 90%
Vin : from 0.5V to Vcc-0.5V SR : calculated from 10% to 90%
Negative Slew Rate (V/s)
3.0
3.5 4.0 4.5 Supply Voltage (V)
5.0
5.5
3.0
3.5
4.0
4.5
5.0
5.5
8/18
Phas Phase () e
Gain (dB)
Phase ()
10
40
Phase
() Phase ()
20
TSV911-TSV912-TSV914
Electrical characteristics
Figure 13. Distorsion + noise vs. frequency
0.01
Figure 14. Distorsion + noise vs. output voltage
0.100
Vcc=2.7V
THD + N (%)
THD + N (%)
0.010 f=1kHz Rl=2kOhms Gain=1 BW =22kHz Vicm=(Vcc+1V)/2
1E-3
0.001
1E-4 10
100
1000
10000
10 0 0
0.01
0.1 Output Voltage (V)
1
Figure 15. Noise vs. frequency
Figure 16. Phase margin vs. capacitive load and serial resistor
Phase Margin ()
Vcc=5V Vrl=2.5V Tamb=25C
9/18
Package information
TSV911-TSV912-TSV914
3
Package information
In order to meet environmental requirements, STMicroelectronics offers these devices in ECOPACK packages. These packages have a lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an STMicroelectronics trademark. ECOPACK specifications are available at: www.st.com.
Note:
All packages are Moisture Sensitivity Level 1 as per Jedec J-STD-020-C, except SO-14 which is Jedec level 3.
10/18
TSV911-TSV912-TSV914
Package information
3.1
SOT23-5 package information
Figure 17. SOT23-5 package mechanical drawing
Table 6.
SOT23-5 package mechanical data
Dimensions
Ref. Min. A A1 A2 b C D E E1 e e1 L 0.35 0.90 0.00 0.90 0.35 0.09 2.80 2.60 1.50
Millimeters Typ. Max. 1.45 0.15 1.30 0.50 0.20 3.00 3.00 1.75 0.95 1.9 0.55 13.7 Min. 35.4 0.00 35.4 13.7 3.5 1 10.2 1 02.3 59.0
Mils Typ. Max. 57.1 5.9 51.2 19.7 7.8 118.1 118.1 68.8 37.4 74.8 21.6
11/18
Package information
TSV911-TSV912-TSV914
3.2
MiniSO-8 package information
Figure 18. MiniSO-8 package mechanical drawing
Table 7.
MiniSO-8 package mechanical data
Dimensions
Ref. Min. A A1 A2 b c D E E1 e L L1 L2 k ccc 0 0.40 0 0.75 0.22 0.08 2.80 4.65 2.80
Millimeters Typ. Max. 1.1 0.15 0.85 0.95 0.40 0.23 3.00 4.90 3.00 0.65 0.60 0.95 0.25 8 0.10 0 0.80 0.016 3.20 5.15 3.10 0 0.030 0.009 0.003 0.11 0.183 0.11 Min.
Inches Typ. Max. 0.043 0.006 0.033 0.037 0.016 0.009 0.118 0.193 0.118 0.026 0.024 0.037 0.010 8 0.004 0.031 0.126 0.203 0.122
12/18
TSV911-TSV912-TSV914
Package information
3.3
SO-8 package information
Figure 19. SO-8 package mechanical drawing
Table 8.
SO-8 package mechanical data
Dimensions
Ref. Min. A A1 A2 b c D H E1 e h L k ccc 0.25 0.40 1 0.10 1.25 0.28 0.17 4.80 5.80 3.80
Millimeters Typ. Max. 1.75 0.25 0.004 0.049 0.48 0.23 4.90 6.00 3.90 1.27 0.50 1.27 8 0.10 0.010 0.016 1 5.00 6.20 4.00 0.011 0.007 0.189 0.228 0.150 Min.
Inches Typ. Max. 0.069 0.010
0.019 0.010 0.193 0.236 0.154 0.050 0.020 0.050 8 0.004 0.197 0.244 0.157
13/18
Package information
TSV911-TSV912-TSV914
3.4
TSSOP14 package information
Figure 20. TSSOP14 package mechanical drawing
A
A2 A1 b e K c L E
D
E1
PIN 1 IDENTIFICATION
1
Table 9.
TSSOP14 package mechanical data
Dimensions
Ref. Min. A A1 A2 b c D E E1 e K L1 0 0.45 0.05 0.8 0.19 0.09 4.9 6.2 4.3
Millimeters Typ. Max. 1.2 0.15 1 1.05 0.30 0.20 5 6.4 4.4 0.65 BSC 8 0.60 0.75 0 0.018 5.1 6.6 4.48 0.002 0.031 0.007 0.004 0.193 0.244 0.169 Min.
Inches Typ. Max. 0.047 0.004 0.039 0.006 0.041 0.012 0.0089 0.197 0.252 0.173 0.0256 BSC 8 0.024 0.030 0.201 0.260 0.176
14/18
TSV911-TSV912-TSV914
Package information
3.5
SO-14 package information
Figure 21. SO-14 package mechanical drawing
Table 10.
SO-14 package mechanical data
Dimensions
Ref. Min. A a1 a2 b b1 C c1 D E e e3 F G L M S 3.8 4.6 0.5 8.55 5.8 0.35 0.19 0.1
Millimeters Typ. Max. 1.75 0.2 1.65 0.46 0.25 0.5 45 (typ.) 8.75 6.2 1.27 7.62 4.0 5.3 1.27 0.68 8 (max.) 0.149 0.181 0.019 0.336 0.228 0.013 0.007 0.003 Min.
Inches Typ. Max. 0.068 0.007 0.064 0.018 0.010 0.019
0.344 0.244 0.050 0.300 0.157 0.208 0.050 0.026
15/18
Ordering information
TSV911-TSV912-TSV914
4
Ordering information
Table 11. Order codes(1)
Temperature range Package Packing Marking V911I SO-8 TSV911AID TSV911AIDT TSV911ILT SOT23-5 TSV911AILT Tape & reel TSV912IST MiniSO-8 TSV912AIST TSV912ID TSV912IDT SO-8 TSV912AID TSV912AIDT TSV914IPT TSSOP14 TSV914AIPT TSV914ID TSV914IDT TSV914AID TSV914AIDT TSV911IYD(2) TSV911IYDT(2) TSV911AIYD(2) TSV911AIYDT(2) TSV912IYD(2) TSV912IYDT(2) TSV912AIYD(2) TSV912AIYDT(2) TSV914IYD(2) TSV914IYDT(2) TSV914AIYD(2) TSV914AIYDT(2) SO-14(1) Automotive grade level SO-8 Automotive grade level -40C to +125C V914I SO-14
(1)
Order code TSV911ID TSV911IDT
Tube o Tape & reel V911AI K127 K128 K125 K126 V912I Tube or Tape & reel V912AI V914I Tape & reel V914AI
V914AI V911IY V911AY Tube or Tape & reel V912IY V912AY V914IY V914AY
1. All packages are Moisture Sensitivity Level 1 as per Jedec J-STD-020-C, except SO-14 which is Jedec level 3. 2. Qualification and characterization according to AEC Q100 and Q003 or equivalent, advanced screening according to AEC Q001 & Q 002 or equivalent are on-going.
16/18
TSV911-TSV912-TSV914
Revision history
5
Revision history
Table 12.
Date 28-Aug-2006
Document revision history
Revision 1 First release. Modified ESD CDM parameter for SO-14 package in Table 1: Absolute maximum ratings (AMR). Noise parameters updated in Section 2: Electrical characteristics. Added limits in temperature in Section 2: Electrical characteristics. Added automotive grade level description in Table 11: Order codes. Added footnote about SO-14 package in Table 11: Order codes. Added Figure 16: Phase margin vs. capacitive load and serial resistor. Updated footnotes for ESD parameters in Table 1: Absolute maximum ratings (AMR). Corrected MiniSO-8 package information in Table 7: MiniSO-8 package mechanical data. Added missing markings for order codes TSV911AILT and TSV912AILT in Table 11: Order codes. Changes
07-Jun-2007
2
11-Feb-2008
3
17/18
TSV911-TSV912-TSV914
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
2008 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
18/18
|
