STP100NF04 STB100NF04
N-channel 40V - 0.0043 - 120A - TO-220 - D2PAK STripFETTM II Power MOSFET
General features
Type STP100NF04 STB100NF04
VDSS 40V 40V
RDS(on) < 0.0046 < 0.0046
ID 120A 120A
Pw 300W 300W
3 1
1 2 3
Standard threshold drive 100% avalanche tested
D²PAK
TO-220
Description
This Power MOSFET is the latest development of STMicroelectronics unique "Single Feature SizeTM" strip-based process. The resulting transistor shows extremely high packing density for low on-resistance, rugged avalanche characteristics and less critical alignment steps therefore a remarkable manufacturing reproducibility.
Internal schematic diagram
Applications
Switching application
Order codes
Part number STB100NF04 STP100NF04 Marking B100NF04 P100NF04 Package D²PAK TO-220 Packaging Tape & Reel Tube
February 2007
Rev 5
1/17
www.st.com 17
Contents:
STB100NF04 - STP100NF04
Contents:
1 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1 2.2 Electrical characteristics (curves) . . .. . .. . .. . .. . .... 6 Spice Thermal Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
3 4 5 6
Test circuit
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2/17
STB100NF04 - STP100NF04
Electrical ratings
1
Electrical ratings
Table 1.
Symbol VDS VGS ID ID
(1) (1)
Absolute maximum ratings
Parameter Drain-source Voltage (VGS=0) Gate-source Voltage Drain-current (continuous) at Tc=25C Drain-current (continuous) at Tc=100C Drain-current (pulsed) Total dissipation at Tc=25C Derating factor Value 40 20 120 120 480 300 2 6 1.2 -55 to 175 Unit V V A A A W W/C V/ns J C
IDM(2) PTOT dv/dt(3) EAS(4) Tj Tstg
Peak Diode Recovery voltage slope Single Pulse Avalanche Energy Operating Junction Temperature Storage Temperature
1. Current limited by package 2. Pulse width limited by safe operating area. 3. ISD 20A, di/dt 00A/s, VDD < V(BR)DSS. Tj < Tjmax 1 3 4. Starting Tj=25C, ID=60A, VDD=30V
Table 2.
Symbol Rthj-case Rthj-pcb Rthj-amb Tl
Thermal resistance
Parameter Thermal Resistance Junction-case Max Thermal Resistance Junction-pcb Max Thermal Resistance Junction-ambient (Free Air) Max Maximum Lead Temperature For Soldering Purpose Value 0.5 (see Figure 13) 62.5 300 Unit C/W C/W C/W C
3/17
Electrical characteristics
STB100NF04 - STP100NF04
2
Electrical characteristics
(TCASE=25C unless otherwise specified) Table 3.
Symbol V(BR)DSS IDSS IGSS VGS(th) RDS(on)
On/off
Parameter Test conditions Min. 40 1 10 100 2 4 0.0043 0.0046 Typ. Max. Unit V A A nA V
Drain-source Breakdown ID=250A, VGS=0 Voltage Zero Gate Voltage Drain VDS=Max Rating Current (VGS=0) VDS=Max Rating Tc=125C Gate-body Leakage Current (VDS=0) Gate Threshold Voltage Static Drain-source On Resistance VGS=20V VDS=VGS, ID=250A VGS=10V, ID=50A
Table 4.
Symbol gfs Ciss Coss Crss Qg Qgs Qgd td(on) tr td(off) tf
Dynamic
Parameter Forward Transconductance Input Capacitance Output Capacitance Reverse Transfer Capacitance Total Gate Charge Gate-Source Charge Gate-Drain Charge Turn-on Delay Time Rise time Turn-off delay Time Fall Time Test conditions VDS=15V, ID=50A VDS=25V, f=1MHz,VGS=0 Min Typ. 150 5100 1300 160 110 35 70 35 220 80 50 150 Max. Unit S pF pF pF nC nC nC ns ns ns ns
VDD=32V, ID=120A VGS=10V
VDD=20V, ID=60A , RG=4.7 VGS=10V (see Figure 21)
4/17
STB100NF04 - STP100NF04
Electrical characteristics
Table 5.
Symbol ISD ISDM(1) VSD(2) trr Q rr IRRM
Source drain diode
Parameter Source-drain Current Source-drain Current (pulsed) Forward on Voltage Reverse Recovery Time Reverse Recovery Charge Reverse recovery Current ISD=120A, VGS=0 ISD=120A, VDD=20V, di/dt=100A/s, Tj=150C 75 185 5 Test conditions Min. Typ. Max. 120 480 1.3 Unit A A V ns nC A
1. Pulse width limited by safe operating area. 2. Pulsed: pulse duration=300s, duty cycle 1.5%
5/17
Electrical characteristics
STB100NF04 - STP100NF04
2.1
Figure 1.
Electrical characteristics (curves)
Power Derating vs. Tc Figure 2. Max Id Current vs. Tc
Figure 3.
Output Characteristics
Figure 4.
Transfer Characteristics
Figure 5.
Transconductance
Figure 6.
Static Drain-source on Resistance
6/17
STB100NF04 - STP100NF04 Figure 7. Gate Charge vs. Gate-source Voltage Figure 8.
Electrical characteristics Capacitance Variations
Figure 9.
Normalized Gate Threshold Voltage Figure 10. Normalized on Resistance vs. vs. Temperature Temperature
Figure 11. Source-Drain Diode Forward Characteristics
Figure 12. Normalized BVdss vs. Temperature
7/17
Electrical characteristics Figure 13. Thermal Resistance Rthj-pcb vs. PCB Copper Area
STB100NF04 - STP100NF04 Figure 14. Thermal Impedance
Figure 15. Max Power Dissipation vs. PCB Copper Area
Figure 16. Safe Operating Area
8/17
STB100NF04 - STP100NF04 Figure 17. Allowable Iav vs. Time in Avalanche
Electrical characteristics
The previous curve give the safe operating area for unclamped inductive loads, single pulse or repetitive, under the following conditions: PD(AVE) = 0.5*(1.3*BVDSS*IAV) EAS(AR) = PD(AVE) * tAV Where: IAV is the Allowable Current in Avalanche PD(AVE) is the Average Power Dissipation in Avalanche (Single Pulse) tAV is the Time in Avalanche To de rate above 25C, at fixed IAV, the following equation must be applied: IAV=2*(Tjmax - TCASE) / (1.3*BVDSS * Zth) Where: Zth= K*Rth is the value coming from Normalized Thermal Response at fixed pulse width equal to TAV
9/17
Electrical characteristics
STB100NF04 - STP100NF04
2.2
Spice thermal model
Table 6. Spice parameter
Parameter CTHERM1 CTHERM1 CTHERM3 CTHERM4 Node 5-4 4-3 3-2 2-1 Value 0.011 0.0012 0.05 0.1
RTHERM1 RTHERM2 RTHERM3 RTHERM4
5-4 4-3 3-2 2-1
0.09 0.02 0.11 0.17
Figure 18. Spice model schematic
10/17
STB100NF04 - STP100NF04
Test circuit
3
Test circuit
Figure 20. Unclamped inductive waveform
Figure 19. Unclamped inductive load test circuit
Figure 21. Switching times test circuit for resistive load
Figure 22. Gate charge test circuit
Figure 23. Test circuit for inductive load switching
Figure 24. Switching time waveform
11/17
Package mechanical data
STB100NF04 - STP100NF04
4
Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com
12/17
STB100NF04 - STP100NF04
Package mechanical data
TO-220 MECHANICAL DATA
DIM. A b b1 c D E e e1 F H1 J1 L L1 L20 L30 mm. MIN. 4.40 0.61 1.15 0.49 15.25 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 0.147 0.104 TYP M AX. 4.60 0.88 1.70 0.70 15.75 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 MIN. 0.173 0.024 0.045 0.019 0.60 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 0.645 1.137 0.151 0.116 inch TYP. M AX . 0.181 0.034 0.066 0.027 0.620 0.409 0.106 0.202 0.052 0.256 0.107 0.551 0.154
øP
Q
13/17
Package mechanical data
STB100NF04 - STP100NF04
D2PAK MECHANICAL DATA TO-247 MECHANICAL DATA
mm. DIM. MIN. A A1 A2 B B2 C C2 D D1 E E1 G L L2 L3 M R V2 0 4.88 15 1.27 1.4 2.4 0.4 4 10 8.5 5.28 15.85 1.4 1.75 3.2 0.192 0.590 0.050 0.055 0.094 0.015 4.4 2.49 0.03 0.7 1.14 0.45 1.23 8.95 8 10.4 0.393 0.334 0.208 0.625 0.055 0.068 0.126 T YP M AX. 4.6 2.69 0.23 0.93 1.7 0.6 1.36 9.35 MIN. 0.173 0.098 0.001 0.027 0.044 0.017 0.048 0.352 0.315 TYP. MAX. 0.181 0.106 0.009 0.036 0.067 0.023 0.053 0.368 inch
3
1
14/17
STB100NF04 - STP100NF04
Packaging mechanical data
5
Packaging mechanical data
D2PAK FOOTPRINT
TAPE AND REEL SHIPMENT
REEL MECHANICAL DATA
DIM. A B C D G N T 1. 5 12.8 20.2 24.4 100 30. 4 26. 4 13. 2 mm MIN. MAX . 330 0. 059 0.504 0.520 0795 0.960 1.039 3. 937 1.197 BULK QTY 1000 i n ch MIN. MAX. 12. 992
TAPE MECHANICAL DATA
DIM. A0 B0 D D1 E F K0 P0 P1 P2 R T W mm MI N. 10. 5 15. 7 1.5 1. 59 1. 65 11.4 4.8 3.9 11.9 1.9 50 0. 25 23. 7 24.3 MAX. 10.7 15.9 1. 6 1.61 1.85 11.6 5. 0 4. 1 12.1 2. 1 i n ch MI N. MAX. 0.413 0.421 0.618 0.626 0.059 0.063 0.062 0.063 0.065 0.073 0.449 0.456 0.189 0.197 0.153 0.161 0.468 0.476 0.075 0.082 1.574 0.35 0.0098 0.0137 0.933 0.956
BASE QTY 1000
* on sales type
15/17
Revision history
STB100NF04 - STP100NF04
6
Revision history
Table 7.
Date 23-Mar-2005 01-Mar-2006 04-Sep-2006 20-Feb-2007
Revision history
Revision 2 3 4 5 New template Removed I²PAK and inserted D²PAK. New template, no content change Typo mistake on page 1 Changes
16/17
STB100NF04 - STP100NF04
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com
17/17
|
