ST Life.augmented

ST-LINK/V2

ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32
  • active 活性

The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.

In addition to provide the same functionalities as the ST-LINK/V2, the ST-LINK/V2-ISOL features digital isolation between the PC and the target application board. It also withstands voltages of up to 1000 Vrms.

STM8 applications use the USB full-speed interface to communicate with the ST Visual Develop (STVD) or ST Visual Program (STVP) software.

STM32 applications use the USB full-speed interface to communicate with Atollic®, IAR, Keil®or TASKING integrated development environments.

pdf 下载
Data Brief

Key Features

  • 5 V power supplied by a USB connector
  • USB 2.0 full-speed-compatible interface
  • USB standard A to Mini- B cable
  • SWIM specific features
  • 1.65 V to 5.5 V application voltage supported on SWIM interface
  • SWIM low-speed and high-speed modes supported
  • SWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed
  • SWIM cable for connection to the application via an ERNI standard vertical connector (ref: 284697 or 214017) or horizontal connector (ref: 214012)
  • SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector
  • JTAG/serial wire debugging (SWD) specific features:
  • 1.65 V to 3.6 V application voltage supported on the JTAG/SWD interface and 5 V tolerant inputs
  • JTAG cable for connection to a standard JTAG 20-pin pitch 2.54 mm connector
  • JTAG supported
  • SWD and serial wire viewer (SWV) communication supported
  • Direct firmware update feature supported (DFU)
  • Status LED which blinks during communication with the PC
  • Operating temperature 0 to 50 °C
  • 1000 Vrmshigh isolation voltage (ST-LINK/V2-ISOL only)

圖像

图案 资源

顶部

Technical Documentation

Product Specifications

描述 版本 大小
pdf
DB1275: ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32
4.0 201 KB

User Manual

描述 版本 大小
pdf
UM1075: ST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32
7.0 658 KB

Hardware Resources

Bill of Materials

描述 版本 大小
zip
ST-LINK/V2 BOM
B-01 13 KB
zip
ST-LINK/V2-ISOL BOM
B-03 13 KB

Related Tools and Software

Related Tools and Software

产品型号 描述
STSW-LINK004 STM32 ST-LINK utility
STSW-LINK005 ST-LINK/V2 firmware upgrade
STSW-LINK009 ST-Link, ST-Link/V2, ST-Link/V2-1 USB driver signed for XP, Windows7, Windows8

License Agreement

描述 版本 大小
pdf
Evaluation products license agreement
1.0 126 KB

样品 & 购买

顶部
产品型号 Marketing StatusGeneral DescriptionSpecific featuresOrder From STUnit Price (US$)*
@ 1
Distributor AvailabilityRoHS Compliance GradeDownload
Material Declaration**
ST-LINK/V2ActiveST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32Buy Direct20.82Distributor reported inventory date: 2016-02-29
Distributor NameRegionStockMin. order
Newark Element14Order NowAMERICA10
ANGLIA LiveOrder NowEUROPE31
ARROWOrder NowEUROPE440
Farnell Element14Order NowEUROPE6791
RS COMPONENTSOrder NowEUROPE9071
RUTRONIKOrder NowEUROPE801
DIGIKEYOrder NowWORLDWIDE29961
FUTUREOrder NowWORLDWIDE211
MOUSEROrder NowWORLDWIDE11461
Ecopack1-
ST-LINK/V2-ISOLActiveST-LINK/V2 in-circuit debugger/programmer for STM8 and STM32With digital isolationBuy Direct77.17Distributor reported inventory date: 2016-02-29
Distributor NameRegionStockMin. order
Newark Element14Order NowAMERICA120
Farnell Element14Order NowEUROPE2561
RS COMPONENTSOrder NowEUROPE1261
DIGIKEYOrder NowWORLDWIDE221
MOUSEROrder NowWORLDWIDE551
Ecopack1-

(*) 建议零售价格仅用于预算,以美元为单位,每。的报价,以当地货币计算的价格,请联系您当地的 ST 销售办事处 或我们的 分销商
(**) 材料声明表格上提供st.com可以是一般的文件,根据最常用的包,包内的家庭。出于这个原因,他们可能不是100%准确,对于一个特定的设备。请联系我们 销售支持 在特定设备上的信息。