ST7MDT20J-TEBTarget emulation board to adapt any ST7-EMU3 series emulator to emulate a specific ST7 or ST7 sub-family. Includes all package s
The ST7-EMU3 series of emulators is the third generation of high-end emulators for ST7. EMU3 series emulators are designed to speed up the development of complex software applications for ST7 microcontrollers by providing a complete range of advanced debugging features. In combination with ST7 Visual Develop (STVD7) and ST7 Visual Programmer (STVP7), they provide start-to-finish control of application development – from building and debugging applications, to programming your ST7.
The EMU3 series emulators deliver start-to-finish control by providing both emulation and In-Circuit Communication (ICC) configurations from a single platform.
In the emulation configuration, the EMU3 probe and STVD7 software allow debugging while connected an application board in place of the target ST7. This configuration offers the most complete range of debugging features, including trace, advanced breakpoints and performance analysis. In addition, the EMU3 comes with all the adapters and connectors to connect to the application board in place of the target ST7.
The ICC configuration allows In-Circuit Debugging (ICD) of the application while it runs on the ST7 that is installed on your application board. Once debugging is completed, the ICC configuration allows In-Circuit Programming (ICP) of ST7 Flash microcontrollers on your application board or an ST7 Socket Board.
- Emulation Features
Unlimited breakpoints with counter and condition Two output triggers Nine external input triggers 256K real-time trace recording with timestamp Memory read/write on the fly Low voltage emulation from 1.8 to 5.5 V Programmable clock frequency from 32 KHz up to 16 MHz Performance Analysis Four-level logic sequencer that allows you to perform specific actions such as: Stop program execution Start/stop trace recording, Record a snapshot in the trace, Output signals via the two output triggersThese actions can be coordinated with the occurrence of a specific event or a series of events such as: an event at an address or range of addresses, a specific data value with bit mask, a read, write or read/write access, stack operation access...or any combination of these.
AN1504: Starting a PWM signal directly at high level using the ST7 16-bit timer
AN971: I2C communication between ST7 and M24CXX EEPROM
UM0133: ST7MDT20J-EMU3 Probe User Guide
Related Tools and Software
Related Tools and Software
|AS-TQFP44||TQFP44 (10x10) socket and cover to solder to an application board for connection of ST emulators.|
|AC7MDT20-T44||TQFP44 (10x10) flex adapter for ST7MDT20J-EMU3|
|AC7MDT20-T32||TQFP32 (7x7) flex adapter for ST7MDT20J-EMU3|
|AS/Stice_Connect||Adapter Socket for application board - to use with STICE-SYS00x emulation systems|
样品 & 购买顶部
|产品型号||Marketing Status||General Description||Specific features||Order From ST||Unit Price (US$)*|
|Distributor Availability||RoHS Compliance Grade||Download
|ST7MDT20J-TEB||NRND||Target emulation board to adapt any ST7-EMU3 series emulator to emulate a specific ST7 or ST7 sub-family. Includes all package s||-||1500||No availability reported, please contact our Sales office||Not compliant||-|
(*) 建议零售价格仅用于预算，以美元为单位，每。的报价，以当地货币计算的价格，请联系您当地的 ST 销售办事处 或我们的 分销商
(**) 材料声明表格上提供st.com可以是一般的文件，根据最常用的包，包内的家庭。出于这个原因，他们可能不是100％准确，对于一个特定的设备。请联系我们 销售支持 在特定设备上的信息。