STEVAL-TLL002V1Flash Driver based on STCF01
This evaluation board is based on the STCF01, that is a white LED driver optimized for driving two to four LEDs from a Li-Ion battery input.
It provides up to 300 mA over an input voltage range of 2.6 V to 5.5 V and it features 16.5 V output voltage, 1.5 MHz internal power switch, internal soft start, open load voltage protection and optimized internal compensation.
Only an inductor, a Schottky diode, two capacitors and two resistors are required. Besides, a low output ripple is guaranteed by the current mode PWM topology and by the use of low E.S.R. SMD ceramic capacitors The STCF01 is ideal for camera flash in cellular phones requiring, small circuit size and very high efficiency (up to 90%).
- For camera flash in cellular phones
- PWM mode control
- High efficiency over wide range of input voltage from 2.6 V to 5.5 V
- Output voltage: 16.5 V
- High switching frequency: 1.5 MHz
DB0708: Flash driver evaluation board based on the STCF01
Board Manufacturing Specification
STEVAL-TLL002V1 gerber files
Bill of Materials
Bill of materials
Sample & BuyTop
|Part Number||Marketing Status||Core Product||Order From ST||Unit Price (US$)*|
|Distributor Availability||RoHS Compliance Grade||Download
|STEVAL-TLL002V1||NRND||STCF01PMR||-||36||No availability reported, please contact our Sales office||Ecopack2||-|
(*) Suggested Resale Price per unit (USD) for BUDGETARY USE ONLY. For quotes, prices in local currency, please contact your local ST Sales Office or our Distributors
(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.