STEVAL-ISA035V1Non-isolated offline power supply demonstration board based on the VIPER22A-E
Many appliances today use non-isolated power supplies to furnish the low output power required to run a microcontroller, LED displays, and relays or AC switches. This type of power supply has a single rectifier to reference the neutral to output ground in order to fire Triacs or AC switches.
This demonstration board can use the VIPER12A-E or the VIPER22A-E, which are pinfor- pin compatible and can supply power for a wide variety of applications.
The VIPER12A-E is used for 12 V at 200 mA and 16 V at 200 mA, while the VIPER22A-E is used for 12 V at 350 mA and 16 V at 350 mA.
The same board can be used for any output voltage from 10 V to 35 V.
For more design details, please refer to application note AN1357.
- Input voltage range 85 Vac to 264 Vac
- Input voltage frequency 50/60 Hz
- Lowest possible component count
- Integrated thermal overload protection
- No-load consumption around 200 mW
- 70% to 80% efficiency at full load
- Integrated short-circuit protection
DB0693: Non-isolated offline power supply demonstration board based on the VIPER22A-E
Board Manufacturing Specification
Bill of Materials
Bill of materials
Sample & BuyTop
|Part Number||Marketing Status||Core Product||Order From ST||Unit Price (US$)*|
|Distributor Availability||RoHS Compliance Grade||Download
(*) Suggested Resale Price per unit (USD) for BUDGETARY USE ONLY. For quotes, prices in local currency, please contact your local ST Sales Office or our Distributors
(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.