ST Life.augmented

SPC56ELADPT144S

Daughter/adapter board for SPC56EL series devices in LQFP144 package
  • active Active

The SPC56ELADPT144S is an evaluation system supporting the STMicroelectronics®SPC56ELxx family of automotive microprocessors. The complete system consists of a SPC56XXMB motherboard and a mini module which plugs directly into the motherboard. Different mini modules are available for evaluating the whole family of devices in all supported packages.

The evaluation system allows full access to the CPU, to all of the CPU’s I/O signals and to the motherboard’s peripherals (such as CAN, SCI and LIN).

The mini module itself can be used as a stand-alone unit when access to the I/O pins or peripherals is not needed.

pdf Download
Data Brief

Key Features

  • SPC56xx modular evaluation system
  • On/off power switch with LED indicators
  • Board power supply: 12 VDC external supply voltage
  • Onboard STMicroelectronics®L9758 voltage regulator with three simultaneous output at 1.2 V, 3.3 V and 5 V
  • Possibility to configure onboard peripherals to operate at 5 V or 3.3 V logic levels, depending on target
  • Two CAN channels with jumper enable
  • One CAN channel with High-Speed transceiver and DB9 male connector
  • One CAN channel with Low-Speed Fault Tolerant and High-Speed transceiver (selectable with jumpers) and DB9 male connector
  • Two LIN channels with jumper enable
  • One channel with transceiver and pin header connector populated
  • One channel with footprints only
  • One SCI channel with jumper enables, transceiver and DB9 female connector
  • Two FlexRay channels with jumper enables
  • One channel with transceiver and DB9 male connector
  • One channel with footprint only
  • Four user push buttons with jumper enable and polarity selection
  • Four user LED’s with jumper enables
  • One potentiometer for analog voltage input
  • Pin array for accessing all I/O signals
  • Expansion connectors for accessing all I/O signals
  • Prototyping area with 0.1” spacing and SOIC footprint
  • Specifications:
  • Board size 110 mm x 75 mm
  • 12 VDC Center Positive power supply with 2.5/5.5 mm barrel connector

Design Resources

Top

Technical Documentation

Product Specifications

Description Version Size
pdf
DB1753: SPC56ELxx microcontroller family evaluation board
2.0 53 KB

Hardware Resources

Schematic Pack

Description Version Size
pdf
Schematic pack and layout for SPC56ELADPT144S
825 KB

Related Tools and Software

Related Tools and Software

Part Number Description
SPC56XXMB Evaluation motherboard for SPC56 series microcontrollers

License Agreement

Description Version Size
pdf
Evaluation products licence agreement
2.0 21 KB

Sample & Buy

Top
Part Number Marketing StatusSpecific featuresOrder From STUnit Price (US$)*
@ 1
Distributor AvailabilityRoHS Compliance GradeDownload
Material Declaration**
SPC56ELADPT144SActive-616No availability reported, please contact our Sales officeNot compliant-

(*) Suggested Resale Price per unit (USD) for BUDGETARY USE ONLY. For quotes, prices in local currency, please contact your local ST Sales Office or our Distributors
(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.
Feedback Form
Customer Feedback