FDA450LV
4x50W low voltage operation PWM digital input power amplifier with I2C diagnostics-
アクティブ
The FDA450LV is a new BCD- SOI (silicon on insulation) technology QUAD BRIDGE class D amplifier, specially intended for car radio applications.
Thanks to the technology used, it is possible to integrate a high performance D/A converter together with powerful MOSFET outputs in class D, to get an outstanding efficiency compared with the standard class AB.
The integrated D/A converter allows to reach outstanding performances (110 dB S/N ratio with 108 dB of dynamic range). The feedback loop includes the output L-C low-pass filter, allowing superior frequency response linearity and lower distortion independently of the inductor and capacitor quality.
FDA450LV is fully configurable through I2C bus interface and integrates a full diagnostics array specially intended for automotive applications.
Thanks to the solutions implemented to solve the EMI problems, the device is conceived to be used in the standard single DIN car-radio box together with the tuner.
The possibility to parallelize the outputs allows to drive both 2 Ω and 1 Ω speakers.
Moreover FDA450LV is able to work with power supply as low as 6 V, thus supporting the most recent low voltage ('start-stop') car-makers specification.
ダウンロード
データシート
Key Features
- Integrated 108 dB D/A conversion
- I2S and TDM digital input (3.3/1.8 V)
- Input sampling frequency: 44.1 kHz, 48 kHz, 96 kHz, 192 kHz
- MOSFET power outputs
- EMI control for FM/AM compatibility
- EMI compliance at the CEI EN 55025 (2009-10)
- Dithering possibility
- Very low external component count filter
- Output lowpass filter included in the feedback
- Low radiation function (LRF)
- Max. output power
4 x 50 W/4 Ω @ 15.2 V, 1 kHz - High output power capability
28 W/4 Ω 10 % THD, Vd = 14.4 V - Full I2C bus driving (3.3/1.8 V):
Independent front/rear soft play/ mute I2C bus diagnostics (including DC and AC load detection, test signal internally generated) - Very flexible fault detection though integrated diagnostic
- Offset detector (play or mute mode)
- Four independent short circuit protection
- Clipping detector
- C-MOS compatible enable pin (3.3/5 V)
- ESD protection
- 6 V operation (“Start - Stop”)
模様 資源
トップTechnical Documentation
Product Specifications
| 描写 | 稿 | 大きさ |
|---|---|---|
DS9335: 4 x 50 W PWM digital input power amplifier with built-in diagnostics features and low voltage operation
|
2.0 | 752 KB |
Publications and Collaterals
Flyer
| 描写 | 稿 | 大きさ |
|---|---|---|
|
Car audio power amplifiers moving to the green zone
|
1,414 KB | |
|
FDA series - automotive fully-digital audio amplifiers
|
1,924 KB |
サンプル& 購入
トップ| 製品型名 | Marketing Status | Package | Packing Type | Operating Temperature (min) | Operating Temperature (max) | Automotive Grade | Order From ST | Unit Price (US$)* @ 1000 | Distributor Availability | RoHS Compliance Grade | Download Material Declaration** |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FDA450LV | Active | TQFP 100 14x14x1.0 | Tray | -40 | 85 | Yes | - | 12.28 | No data reported, please contact our Distributors | Ecopack2 | PDF XML | |
(*) 概算見積もり用になり通貨単位が価格（USD）。詳細情報については、現地通貨での価格は、地元の販売店にお問い合わせください ST 販売の オフィス または当社 代理店 (**) st.comで利用可能な材質宣言フォームはパッケージ·ファミリの中で最も一般的に使用されるパッケージに基づいて一般的な文書かもしれません。このような理由から、彼らは、特定のデバイスのための100％正確ではないかもしれません。当社までご連絡ください セールスサポート 特定のデバイスの詳細については、 |
||||||||||||
