ST Life.augmented

STEVAL-ILB005V2

Demonstration board for the L6585DE combo IC for PFC and ballast control
  • NRND NRND

Requirements for modern fluorescent lamp electronic ballasts focus on driver efficiency and safety aspects.

Previous dedicated ICs for ballast applications allowed designers to achieve good driver efficiency, but they required a lot of external circuitry to obtain good power factor correction, low THD and a full set of protection features.

The STEVAL-ILB005V2 demonstration board is based on the new L6585DE combo IC for ballast applications, which offers designers a highperformance PFC stage, and a high capability, fully programmable, half-bridge high-voltage driver. The device is also equipped with a full set of protection features.

Designed in high-voltage BCD off-line technology, the L6585DE embeds a PFC controller, a halfbridge controller, the relevant drivers and all the logic circuitry necessary to build an electronic ballast.

Another important feature of the IC is its capability to control and limit the lamp voltage during the ignition phase.

The pre-heating and ignition durations are independently configurable, as are the half-bridge switching frequencies for each operating phase (pre-heating, ignition and normal mode).

Other features, such as half-bridge over-current with frequency increase and PFC over-voltage, allow designers to build a reliable, flexible solution with a reduced component count.

pdf Please read
Errata Sheet
pdf データシート
Data Brief

Key Features

  • Input voltage: 88 Vac - 277 Vac
  • Input frequency: 50 Hz - 60 Hz
  • Output power: 54 W
  • Expected efficiency: 90%
  • Expected Input power: 60 W
  • Minimum PF required: 0.95
  • Maximum THD: 8%
  • Lamp voltage (run mode): 110 Vrms
  • Lamp current (run mode): 455 mArms
  • Maximum ignition voltage: 900 Vpk
  • Maximum preheating voltage: < 240 Vac
  • Preheating time: 1 s
  • Ignition time: 60 - 100 ms

画像

デザイン・リソース

トップ

Technical Documentation

Product Specifications

Description Version Size
pdf
DB0779: Demonstration board for the L6585DE combo IC for PFC and ballast control
2.1 117 KB

Application Notes

Description Version Size
pdf
AN2982: 1 x 54 W T5 fluorescent lamp ballast in wide input voltage range using the L6585DE - STEVAL-ILB005V2
1.1 1,720 KB

Hardware Resources

Board Manufacturing Specification

Description Version Size
zip
Gerber files for STEVAL-ILB005V2 board
1.0 77 KB

Bill of Materials

Description Version Size
pdf
BOM for STEVAL-ILB005V2 board
1.0 23 KB

Schematic Pack

Description Version Size
pdf
Board schematics for STEVAL-ILB005V2 board
1.0 38 KB

サンプル& 購入

トップ
製品型名 Marketing StatusCore ProductOrder From STUnit Price (US$)*
@ 1
Distributor AvailabilityRoHS Compliance GradeDownload
Material Declaration**
STEVAL-ILB005V2NRNDL6585DE-108Distributor reported inventory date: 2014-08-29
Distributor NameRegionStockMin. order
P&SOrder NowASIA/PACIFIC11
Ecopack2-

(*)ユニット当たりの推奨再販価格(米ドル建て)は、あくまで予算的な参考情報としてご利用下さい。現地通貨ベースでのお見積り、価格については 弊社セールスオフィス もしくは 販売代理店 にお問合せ下さい。
(**)弊社ホームページで入手できるMaterial Declaration(材料宣誓書)のフォームは、各パッケージ・タイプで最も一般的に使用されるパッケージに基づいた包括的な文書です。そのため、特定のデバイスについて100%正確ではない可能性があります。特定のデバイスに関する情報については、 弊社セールスオフィス にお問合せ下さい。
Feedback Form
Customer Feedback