ST Life.augmented

EVL185W-LEDTV

185 W power supply with PFC and standby supply for LED TV using the L6564, L6599A, and VIPER27L
  • active Active

The EVL185W-LEDTV is a high-end demonstration board tailored to the specifications of a typical LED TV application. The peculiarities of this design are the very high average efficiency of about 90%, without synchronous rectification, and very low no load consumption of 100 mW at 230 Vac. The result is that this converter is compliant to the most demanding ENERGY STAR® eligibility criteria. The architecture is made up of two sections, based on a three-stage approach: a 10 W standby supply using the new VIPer27L, which delivers the 5 V standby dedicated to supplying the microprocessor and the logic circuitry, and a bigger section composed of a front-end PFC, using the new TM L6564 and an LLC resonant converter, using the L6599A, delivering three output voltages: 12 V dedicated to supplying the TV panel, 24 V to supplying the audio power amplifiers, and 130 V dedicated to the backlight.

The PFC stage delivers 400 V constant voltage and acts as the pre-regulator for both the LLC stage and the standby supply.

An external signal, referred to secondary ground, turns the PFC and the LLC stage on and off.

pdf Please read
Errata Sheet
pdf データシート
Data Brief

Key Features

  • Universal input mains range: 90÷264 Vac - frequency 45÷65 Hz
  • Output voltage 1: 130 V ±8 % at 620 mA for backlight
  • Output voltage 2: 24 V ±8 % at 2 A for audio supply
  • Output voltage 3: 12 V ±1 % at 4 A for panel supply
  • Output voltage 4: 5 V ±2 % at 2 A for microprocessor supply
  • Mains harmonics: acc. to EN61000-3-2 Class-D or JEITA-MITI Class-D
  • Standby mains consumption: <170 mW at 230 Vac with 50 mW load
  • Overall efficiency at full load: >90%
  • EMI: according to EN55022-Class-B
  • Safety: according to EN60065
  • Dimensions: 115x204 mm, 25 mm maximum component height from PCB
  • PCB: single side, 70 μm, CEM-1, mixed PTH/SMT introduction
  • RoHS compliant

画像

デザイン・リソース

トップ

Technical Documentation

Product Specifications

Description Version Size
pdf
DB1268: 185 W power supply with PFC and standby supply for LED TV based on the L6564, L6599A and Viper27L
1.1 115 KB

Hardware Resources

Bill of Materials

Description Version Size
pdf
BOM for EVL185W-LEDTV board
1.0.0 43 KB

Schematic Pack

Description Version Size
pdf
Board schematics for EVL185W-LEDTV board
1.0.0 71 KB

サンプル& 購入

トップ
製品型名 Marketing StatusCore ProductOrder From STUnit Price (US$)*
@
Distributor AvailabilityRoHS Compliance GradeDownload
Material Declaration**
EVL185W-LEDTVActiveL6564, L6599A, VIPER27LBuy Direct245Distributor reported inventory date: 2014-11-27
Distributor NameRegionStockMin. order
Newark Element14Order NowAMERICA10
DIGIKEYOrder NowWORLDWIDE31
Ecopack1-

(*)ユニット当たりの推奨再販価格(米ドル建て)は、あくまで予算的な参考情報としてご利用下さい。現地通貨ベースでのお見積り、価格については 弊社セールスオフィス もしくは 販売代理店 にお問合せ下さい。
(**)弊社ホームページで入手できるMaterial Declaration(材料宣誓書)のフォームは、各パッケージ・タイプで最も一般的に使用されるパッケージに基づいた包括的な文書です。そのため、特定のデバイスについて100%正確ではない可能性があります。特定のデバイスに関する情報については、 弊社セールスオフィス にお問合せ下さい。
Feedback Form
Customer Feedback