ST Life.augmented

STEVAL-ISV014V1

Up to 3 W solar and USB battery charger for single-cell Li-Ion and Li-Po batteries based on the SPV1040, STBC21 and STC3100
  • active Active

The STEVAL-ISV014V1 demonstration board provides a very high level of integration being based on the ST devices SPV1040 (solar energy harvester and power optimizer), STBC21 (single cell Li-Ion battery charger) and STC3100 (gas gauge).

The STEVAL-ISV014V1 controls the single-cell Li-Ion battery charging thanks to the STBC21, which can be supplied by a solar panel or by an USB (type-A connector) compatible supply. The battery charging status set by STBC21 can be controlled via I2C. Safety during the battery charge process is guaranteed by the gas-gauge controller device STC3100.

When the energy is provided by the solar panel, the SPV1040 optimizes the power extracted from the source and boosts the voltage, charging a 440mF super-capacitor, which is connected to the input stage of the STBC21 by a STS5PF30L P-channel power MOSFET.

Furthermore, the STEVAL-ISV014V1 can be used to supply a type-B USB compatible load by an external Li-Ion battery. In this case, the L6920 voltage boost controller will regulate the battery voltage up to the 5 V required by the USB standard.

Finally, the STEVAL-ISV014V1 has a dedicated charging monitor circuitry implemented by 4 LEDs and by the TS339 quad comparator.

pdf データシート
Data Brief

Key Features

  • Solar section
  • Solar energy harvester with proprietary “Perturb and Observe” embedded MPPT algorithm
  • Reverse polarity protection for solar panel connection
  • Battery charging section
  • Both linear and quasi-pulse operation, with programmable charge current (up to 1 A) in both fast charge and pre-charge mode
  • Selectable 4.1 V and 4.2 V output voltage (±1% accuracy)
  • Programmable termination current, pre-charge mode voltage threshold and charge time setting by I2C
  • Coulomb counter available via I2C
  • Status outputs to drive LEDs or host processor interface
  • Charge status LED indicator
  • Battery protection section
  • Battery absence detection
  • Battery thermal control (monitoring and protection) by NTC or PTC thermistor interface
  • 5 V USB supply output from external battery
  • RoHS compliant

画像

デザイン・リソース

トップ

Technical Documentation

Product Specifications

Description Version Size
pdf
DB1537: Up to 3 W solar and USB battery charger for single-cell Li-Ion and Li-Po batteries based on the SPV1040, STBC21 and STC3100
2.0 349 KB

Hardware Resources

Board Manufacturing Specification

Description Version Size
zip
STEVAL-ISV014V1 gerber files
1.0.0 607 KB

Bill of Materials

Description Version Size
pdf
STEVAL-ISV014V1 BOM
2.0.0 73 KB

Schematic Pack

Description Version Size
pdf
STEVAL-ISV014V1 schematics
2.0.0 82 KB

サンプル& 購入

トップ
製品型名 Marketing StatusCore ProductOrder From STUnit Price (US$)*
@
Distributor AvailabilityRoHS Compliance GradeDownload
Material Declaration**
STEVAL-ISV014V1ActiveSPV1040; STBC21; ST3100Buy Direct128.62Distributor reported inventory date: 2014-04-22
Distributor NameRegionStockMin. order
P&SOrder NowASIA/PACIFIC11
MOUSEROrder NowWORLDWIDE31
Ecopack2-

(*)ユニット当たりの推奨再販価格(米ドル建て)は、あくまで予算的な参考情報としてご利用下さい。現地通貨ベースでのお見積り、価格については 弊社セールスオフィス もしくは 販売代理店 にお問合せ下さい。
(**)弊社ホームページで入手できるMaterial Declaration(材料宣誓書)のフォームは、各パッケージ・タイプで最も一般的に使用されるパッケージに基づいた包括的な文書です。そのため、特定のデバイスについて100%正確ではない可能性があります。特定のデバイスに関する情報については、 弊社セールスオフィス にお問合せ下さい。
Feedback Form
Customer Feedback