32-bit Power Architecture MCU for Automotive Body and Gateway Applications

These 32-bit automotive microcontrollers are a family of system-on-chip (SoC) devices designed to be central to the development of the next wave of central vehicle body controller, smart junction box, front module, peripheral body, door control and seat control applications.

This family is one of a series of next-generation integrated automotive microcontrollers based on the Power Architecture technology and designed specifically for embedded applications.

The advanced and cost-efficient e200z0h host processor core of this automotive controller family complies with the Power Architecture technology and only implements the VLE (variable-length encoding) APU (auxiliary processing unit), providing improved code density. It operates at speeds of up to 48 MHz and offers high performance processing optimized for low power consumption. It capitalizes on the available development infrastructure of current Power Architecture devices and is supported with software drivers, operating systems and configuration code to assist with the user’s implementations.

The device platform has a single level of memory hierarchy and can support a wide range of on-chip static random access memory (SRAM) and internal flash memory.

Key Features

  • High-performance up to 48 MHz e200z0h CPU
    • 32-bit Power Architecture® technology CPU
    • Variable length encoding (VLE)
  • Memory
    • Up to 256 KB Code Flash with ECC
    • Up to 64 (4x16) KB Data Flash with ECC
    • Up to 16 KB SRAM with ECC
  • Interrupts
    • 16 priority levels
    • Non-maskable interrupt (NMI)
    • Up to 38 external interrupts incl. 18 wakeup lines
  • 16-channel eDMA
  • GPIOs: 45 (LQFP64), 79 (LQFP100)
  • Timer units
    • 4-channel 32-bit periodic interrupt timers
    • 4-channel 32-bit system timer module
    • System watchdog timer
    • 32 bit real-time clock timer
  • 16-bit counter time-triggered I/Os
    • Up to 28 channels with PWM/MC/IC/OC
    • 5 independent counters
    • 27 ch. with ADC trigger capability
  • 12-bit analog-to-digital converter (ADC) with up to 33 channels
    • Up to 61 channels via external multiplexing
    • Individual conversion registers
    • Cross triggering unit (CTU)
  • Dedicated diagnostic module for lighting
    • Advanced PWM generation
    • Time-triggered diagnostics
    • PWM-synchronized ADC measurements
  • Communications interfaces
    • 1 FlexCAN interface (2.0B active) with32 message buffers
    • 3 LINFlex/UART, 1 with DMA capability
    • 2 DSPI
  • Clock generation
    • 4 to 16 MHz fast external crystal oscillator
    • 16 MHz fast internal RC oscillator
    • 128 kHz slow internal RC oscillator
    • Software-controlled FMPLL
    • Clock monitoring unit
  • Exhaustive debugging capability
    • Nexus1 on all packages
    • Nexus2+ available on emulation device (SPC560B64B2-ENG)
  • On-chip CAN/UART bootstrap loader
  • Low power capabilities
    • Several low power mode configurations
    • Ultra-low power standby with RTC,SRAM and CAN monitoring
    • Fast wakeup schemes
  • Single 5 V or 3.3 V supply
  • Operates in ambient temperature range of-40 to 125 °C



Description Version Size
32-bit MCU family built on the Power Architecture® for automotive body electronics applications 7.0 680 KB
Description Version Size
10-bit ADC - Configuration Guide for SPC56xBxx and SPC56xCxx products 3.0 234 KB
Analyzing flash accesses with Lauterbach Trace32 5.0 556 KB
ECC management on SPC560x 2.1 546 KB
Flash Programming for SPC560xx,RPC560xx, SPC56APxx, RPC56APxx and SPC563M64xx devices 3.0 322 KB
Flash programming through Nexus/JTAG 3.0 999 KB
Hardware design guideline power supply and voltage measurement 3.0 1 MB
SPC560B power and mode management 2.1 563 KB
Technical Notes & Articles
Description Version Size
SPC56xB/C/Dxx family overview - features comparison 3.1 179 KB
Description Version Size
Standard software driver for C90LC Flash 2.3 949 KB
Variable-Length Encoding (VLE) extension -programming interface manual 1.3 421 KB
uTester 1.0 2 MB
Description Version Size
Programmer's reference manual for Book E processors 2.0 24 MB
SPC560D30L1, SPC560D30L3, SPC560D40L1, SPC560D40L3 32-bit MCU family built on the embedded Power Architecture® 6.0 6 MB
Description Version Size
32-bit MCU family built on the Power Architecture® category for automotive electronics 3.0 424 KB
32-bit MCU family built on the Power Architecture®category for automotive electronics 1.0 412 KB


Description Version Size
SPC5 32-bit microcontroller Series featuring Power Architecture 2 MB
SPC5 Family Overview October 2015 2 MB


Description Version Size
All you need to drive SPC56 32-bit power architecture MCUs 1.0 1 MB
Driving Electromobility 1.0 1 MB


Design Tools
Smart selectors
Hardware Development Tools
Software Development Tools
MCUs Embedded Software
Product Evaluation Tools


型号 Marketing Status Packing Type CPU Clock Frequency (MHz) (max) FLASH Size (kB) (Data) Features set Operating Temperature (°C) (min) Operating Temperature (°C) (max) Unit Price (US$) * Quantity ECCN (EU) ECCN (US) Country of Origin More info Order from ST Order from Distributors
SPC560D30L1B4E0X Active Tape And Reel 48 64 - -40 105 - - NEC 3A991A2 MALTA MORE INFO DISTRIBUTOR AVAILABILITY

(*) Suggested Resale Price per unit (USD) for BUDGETARY USE ONLY. For quotes, prices in local currency, please contact your local ST Sales Office  or our Distributors


型号 Marketing Status Package Grade RoHS Compliance Grade Material Declaration**
SPC560D30L1B4E0X ActiveLQFP 64 10x10x1.4AutomotiveEcopack2 0 0

(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.