P-NUCLEO-IOD01A1

Active
Design Win

STM32 Nucleo pack for IO-Link device fully compatible with IO-Link v1.1 (PHY and stack)

Download databrief Order Direct
Overview
Sample & Buy
Solutions
Documentation
CAD Resources
Tools & Software
Quality & Reliability
Get Started
Partner products
Sales Briefcase

Product overview

Description

The P-NUCLEO-IOD01A1 is an STM32 Nucleo pack composed of the NUCLEO-L073RZ development board, the STEVAL-IOD003V1 evaluation board and the X-NUCLEO-IKS01A2 expansion board.

The STEVAL-IOD003V1 offers an IO-Link device PHY layer (L6362A) while the NUCLEO-L073RZ runs the IO-Link stack v1.1.3 included in the STSW-IOD01 (developed by and property of TEConcept Gmbh) and the firmware controlling the X-NUCLEO-IKS01A2 sensors.

The STM32 Nucleo pack provides an affordable and easy-to-use solution for the development of IO-Link and SIO applications, L6362A communication features and robustness, together with the STM32L073RZT6 computation performance.

  • All features

    • Equipped with Arduino UNO R3 connectors and compatible with STEVAL-IOD003V1, X-NUCLEO-IKS01A2 and NUCLEO-L073RZ boards
    • The STEVAL-IOD003V1 features:
      • IO-Link (PHY) device layer based on L6362A
      • Operating voltage range 6.5 to 35 V
      • Dedicated CQ overload pin (wake-up)
      • Diagnostics pin (UVLO, overtemperature and cut-off)
      • UART interface
      • Linear regulators for independent supply from +24 V bus (12 mA 3.3 V and 100 mA 12 V)
      • LEDs for status and diagnostics
      • Overload and overheating protections with non-dissipative cut-off function
      • Full reverse polarity on IO-Link interface pins
      • EMC protections according to IO-Link v1.1 and IEC 60947-5-2
      • Ground and VCC wire break protections
    • The X-NUCLEO-IKS01A2 features:
      • LSM6DSL 3D accelerometer and 3D gyroscope
      • LSM303AGR 3D accelerometer and 3D magnetometer
      • LPS22HB pressure sensor
      • HTS221 capacitive digital relative humidity and temperature
      • DIL24 socket for additional MEMS adapters and other sensors
      • Free comprehensive development firmware library and samples for all sensors compatible with STM32Cube firmware
    • The NUCLEO-L073RZ features:
      • STM32L073RZT6 32-bit microcontroller based on ARM® Cortex®-M0+ core
      • Pre-programmed with STSW-IOD01 (IO-Link device stack v1.1.3)
      • Arduino UNO R3 connectivity and ST morpho extension pin headers
      • Mbed-enabled (http://mbed.org)
      • On-board ST-LINK/V2-1 debugger/programmer with SWD connector

You might also like...

All tools & software

    • Part number
      Status
      Description
      Type
      Supplier

      STSW-IOD01

      Active

      IO-Link v1.1.3 sensor software for P-NUCLEO-IOD01A1

      Evaluation Tool Software ST
      STSW-IOD01

      Description:

      IO-Link v1.1.3 sensor software for P-NUCLEO-IOD01A1
    • Part number
      Status
      Description
      Type
      Supplier

      NUCLEO-L073RZ

      Active

      STM32 Nucleo-64 development board with STM32L073RZ MCU, supports Arduino and ST morpho connectivity

      STM32 Nucleo Boards ST
      NUCLEO-L073RZ

      Description:

      STM32 Nucleo-64 development board with STM32L073RZ MCU, supports Arduino and ST morpho connectivity
    • Part number
      Status
      Description
      Type
      Supplier

      STEVAL-IOD003V1

      Active

      IO-Link (PHY) device evaluation board based on L6362A with Arduino connectors for STM32 Nucleo

      Communication and Connectivity Solution Eval Boards ST
      STEVAL-IOD003V1

      Description:

      IO-Link (PHY) device evaluation board based on L6362A with Arduino connectors for STM32 Nucleo
    • Part number
      Status
      Description
      Type
      Supplier

      X-NUCLEO-IKS01A2

      Active

      Motion MEMS and environmental sensor expansion board for STM32 Nucleo

      STM32 ODE Sense HW ST
      X-NUCLEO-IKS01A2

      Description:

      Motion MEMS and environmental sensor expansion board for STM32 Nucleo

Quality and Reliability

Part Number Marketing Status RoHS Compliance Grade Material Declaration**
P-NUCLEO-IOD01A1
Active
Ecopack2

P-NUCLEO-IOD01A1

Package:

Ecopack2

Material Declaration**:

Marketing Status

Active

RoHS Compliance Grade

Ecopack2

(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.

Sample & Buy

Swipe or click the button to explore more details Don't show this again
Part Number
Order from distributors
Order from ST
Core Product
Marketing Status
Supplier
ECCN (US)
ECCN (EU)
Board production status
Country of Origin
Budgetary Price (US$)*/Qty
P-NUCLEO-IOD01A1 Available at distributors

Distributor availability of P-NUCLEO-IOD01A1

Distributor Name
Region Stock Min. Order Third party link

Distributor reported inventory date:

No availability of distributors reported, please contact our sales office
-
Active
ST 3A991.a.2 NEC Stock available ITALY

P-NUCLEO-IOD01A1 Active

ECCN (US):
3A991.a.2
Budgetary Price (US$)*/Qty:
-

Part Number:

P-NUCLEO-IOD01A1

Core Product:

-

Supplier:

ST

ECCN (EU):

NEC

Board production status:

Stock available

Country of Origin:

ITALY

Distributor Name

Distributor reported inventory date:

Swipe or click the button to explore more details Don't show this again

(*) Suggested Resale Price (USD) per defined quantity for BUDGETARY USE ONLY. For quotes, prices in local currency, please contact your local ST Sales Office or our Distributors