The STSW-BLUENRG1-DK evaluation SW package is based on the BlueNRG-1 and BlueNRG-2 very low power Bluetooth low energy (BLE) single-mode systems-on-chip with 160 KB and 256 KB of Flash memory, respectively, 24 KB of RAM, 32-bit core ARM® Cortex®-M0 and ADC, GPIOs, I²C, RTC, SPI, Timers, UART, WDG and RTC peripherals.
The STSW-BLUENRG1-DK SW package supports the BlueNRG-1 and BlueNRG-2 kit platforms available on relative web pages. It provides a Bluetooth low energy binary library with a complete set of APIs and related events callbacks allowing to interface with the Bluetooth low energy features offered by the BlueNRG-1 and BlueNRG-2 devices. The SW package also provides a set of BLE demonstration applications regarding some typical Bluetooth low energy working scenarios. Each demonstration application comes with a complete set of header and source files.
The STSW-BLUENRG1-DK SW package contains a complete set of peripheral drivers (header and source files), which allow to interface with the device peripherals (ADC, GPIOs,I²C, RTC, SPI, Timers, UART and WDG, RTC) and the Radio low level driver which provides access to the BlueNRG-1 2.4 GHz proprietary radio to send and receive packets without using the Bluetooth link layer.
The 2.4 GHz proprietary radio examples are built on top of the Radio Low level driver and can be used as reference examples for building other applications that use the BlueNRG-1 2.4 GHz proprietary radio.
The software package also includes BlueNRG-1 and BlueNRG-2 Navigator PC applications, which provide an interactive, simple and user-friendly interface to select and run demonstration applications for the resources available in the BlueNRG-1 and BlueNRG-2 DK SW packages, without the need for any extra hardware. The BlueNRG-1 and BlueNRG-2 Navigator are two instances of the same application tailored for the respective device, allowing access to the relative HW and SW kit resources available.
Another available PC application is the BlueNRG-1 Radio Initialization Parameters Wizard that allows the definition of the proper values required for correct BlueNRG-1 and BlueNRG-2 BLE radio initialization, based on the specific user application scenario. A configuration header file, generated from the chosen parameter values, must then be used in the specific user software application folder.
- Bluetooth® SMART SW package supporting BlueNRG-1 and BlueNRG-2 Bluetooth® low energy (BLE) systems-on-chip
- BlueNRG-1 Navigator and BlueNRG-2 Navigator PC applications
- BlueNRG-1 Radio Initialization Parameters Wizard
- Bluetooth low energy stack binary library and APIs, events callbacks interface
- BlueNRG-1 and BlueNRG-2 Bluetooth low energy demonstration applications
- BlueNRG-1 and BlueNRG-2 CMSIS files
- BlueNRG-1 and BlueNRG-2 peripheral drivers and related examples
- BlueNRG-1, BlueNRG-2 2.4 GHz radio proprietary driver and examples
- BlueNRG-1 and BlueNRG-2 SDK and HAL drivers
- BlueNRG-1 and BlueNRG-2 kit platforms support
Something went wrong with the server request. Please try again in a few moments.
Request for software successfully submitted. The approval process may take up to 48 hours. After you have been approved, you should receive a link to the requested software via email.
Unfortunately, the link you clicked didn't work. Don't worry, here are the steps you can take to get your download started:If you still can't download the software, please reach out to us on the ST Community and we will help you
- Ensure you are using the same browser used to made the initial request
- Check that cookies are allowed in your browser
- Update your browser to its latest version
- Please also note that links forwarded by somebody else will not work
|Part Number||Software Version||Marketing Status||Supplier||Download|
Recommended for you
Latest from ST
To validate your subscription, please click on the link inside the email that has been sent to you. This link will be valid for 24 hours. Please check your spam filters in case you did not receive the email.
Picture Part number Manufacturer Description STEVAL-IDB007V2 ST STEVAL-IDB007V2 evaluation platform based on the BlueNRG-1 STEVAL-IDB008V1 ST Evaluation platform based on the BlueNRG-2 STEVAL-IDB008V2 ST Evaluation platform based on the BlueNRG-2 STEVAL-IDB009V1 ST Evaluation platform based on the BlueNRG-248