Overview
Sample & Buy
Solutions
Resources
Tools & Software
Quality & Reliability
eDesignSuite
Get Started
Partner products
Sales Briefcase
  • The STEVAL-IHT005V2 is designed as a complete solution proposal for home appliance applications based on STMicroelectronics™ components. Special emphasis is placed on demonstration of a robust full 3.3 V solution, based on 4 kV level in class A during an IEC-61000-4-4 (burst) test. The board also allows designers to evaluate the feasibility of AC switch control with a 3.3 V supply. Gate currents can be measured and compared to the information given in application note AN2986. STEVAL-IHT005V2 is based on the recently-introduced 48-pin, 32-bit STM32F100C4T6B MCU running at 24 MHz (RC user-trimmable internal RC clock), featuring 16 kBytes of Flash memory, 12-bit A/D converter, 5 timers, communication interfaces, and 4 kBytes of SRAM. The power supply circuitry is based on the VIPer16L, an offline converter with an 800 V avalanche-rugged power section, operating at 60 kHz. The power supply provides negative 6 V in buck-boost topology. The STEVAL-IHT005V2 can control 2 high power loads up to 2830 W thanks to the T1635H, a 16 A, 600 V high temperature Triac and up to 2050 W using the ACST1635-8FP, a 16 A, 800 V high temperature overvoltage-protected ACST device. The high power load control is based on phase-angle control. To limit inrush current and possible current peaks, the board features a soft-start routine and a smooth power change function for the high power loads. The STEVAL-IHT005V2 can also control 4 low power loads up to 100 W thanks to 3 ACS108-8S, 0.8 A, 800 V overvoltage-protected ACS devices and a Z0109, 1 A standard 4 quadrant 600 V Triac.

    Key Features

    • Complete solution for -3.3 V control
    • Input voltage range: 90-265 VAC 50/60 Hz
    • Negative 6 V/3.3 VDC aux power supply based on the VIPer16L in buck-boost topology
    • Total power consumption in standby mode lower than 0.5 W for 264 V/50 Hz
    • 48-pin, 32-bit value line family STM32F100C4T6B MCU as main controller
    • Zero voltage switching (ZVS) interrupt to synchronize MCU events with voltage mains
    • 1 x T1635H-6T and 1 x ACST1635-8FP for phase control of high power loads
    • 5 discrete power level states with soft change for phase-angle controlled devices
    • 1 x Z0109 and 3 x ACS108 for full wave control of low power loads
    • Relay to demonstrate board noise robustness
    • Red LED to indicate board mains supply
    • Green LED for each ACS/ACST/Triac to indicate device on/off status
    • JTAG programming connector
    • External wire loop for gate current measurement
    • I2C bus hardware/software ready
    • IEC 61000-4-4 pre-compliance test passed (burst up to 8 kV)
    • IEC 61000-4-5 pre-compliance test passed (surge up to 2 kV)
    • RoHS compliant

Recommended for you

Related Applications

Smart Farming

00 Files selected for download

Technical Documentation

    • Description Version Size Action
      DB2009
      Demonstration board with full 3.3 V ACS/Triac control using the STM32F100
      1.0
      398.08 KB
      PDF
      DB2009

      Demonstration board with full 3.3 V ACS/Triac control using the STM32F100

    • Description Version Size Action
      UM1631
      STEVAL-IHT005V2 - 3.3 V control of ACS®/Triac with STM32™
      1.2
      1.49 MB
      PDF
      UM1631

      STEVAL-IHT005V2 - 3.3 V control of ACS®/Triac with STM32™

Hardware Resources

    • Description Version Size Action
      STEVAL-IHT005V2 gerber files 1.0
      77.06 KB
      ZIP

      STEVAL-IHT005V2 gerber files

    • Description Version Size Action
      STEVAL-IHT005V2 BOM 1.0
      9.99 KB
      PDF

      STEVAL-IHT005V2 BOM

    • Description Version Size Action
      STEVAL-IHT005V2 schematics 1.0
      150.65 KB
      PDF

      STEVAL-IHT005V2 schematics

Legal

    • Description Version Size Action
      Terms of use 1.7
      57.54 KB
      PDF

      Terms of use

Quality and Reliability

Part Number Marketing Status Package Grade RoHS Compliance Grade WEEE Compliant Material Declaration**
STEVAL-IHT005V2
Active
CARD Industrial Ecopack2 -

STEVAL-IHT005V2

Package:

CARD

Material Declaration**:

Marketing Status

Active

Package

CARD

Grade

Industrial

RoHS Compliance Grade

Ecopack2

(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.

Sample & Buy

Part Number
Order from Distributors
Order from ST
Core Product
Marketing Status
Supplier
ECCN (US)
ECCN (EU)
Country of Origin
Budgetary Price (US$)*/Qty
STEVAL-IHT005V2 Available at 1 distributors

Distributor availability ofSTEVAL-IHT005V2

Distributor Name
Region Stock Min. Order Third party link
RS COMPONENTS EUROPE 2 1 Order Now

Distributor reported inventory date: 2020-08-10

Distributor Name

RS COMPONENTS

Stock

2

Min.Order

1

Region

EUROPE Order Now

Distributor reported inventory date: 2020-08-10

ACS108, Z01, ACST1635-8FP, T1635H, STM32F100
Active
- EAR99 NEC ITALY 202.0 / 1

STEVAL-IHT005V2

Core Product

ACS108, Z01, ACST1635-8FP, T1635H, STM32F100

Marketing Status

Active

Budgetary Price (US$)*/Qty

202.0 / 1

Distributor availability ofSTEVAL-IHT005V2

Distributor Name
Region Stock Min. Order Third party link
RS COMPONENTS EUROPE 2 1 Order Now

Distributor reported inventory date: 2020-08-10

Distributor Name

RS COMPONENTS

Stock

2

Min.Order

1

Region

EUROPE Order Now

Distributor reported inventory date: 2020-08-10

Supplier

-

ECCN (US)

EAR99

ECCN (EU)

NEC

Budgetary Price (US$)* / Qty

202.0 / 1

Country of Origin

ITALY

(*) Suggested Resale Price per unit (USD) for BUDGETARY USE ONLY. For quotes, prices in local currency, please contact your local ST Sales Office  or our Distributors