STSPIN830 lis a compact and versatile field oriented control FOC ready three-phase motor driver. It integrates in a very small 4 x 4 mm QFN package, both the control logic and a fully protected low RDSon triple half-bridge power stage.
Thanks to a dedicated MODE input pin the device offers the freedom to decide whether to drive it through 6 inputs (one for each power switch) or a more common 3 PWM direct driving inputs.
The STSPIN830 supports both single and three shunts architectures and embeds a PWM current controller based on user settable values of reference voltage and OFF time.
The devices can be forced in a low consumption state reducing the total current consumption down to less than 45 μA.
As with all other devices from the STSPIN family, the STSPIN830 integrates a complete set of protections for the power stages (non-dissipative overcurrent, thermal shutdown, short-circuit, undervoltage lockout and interlocking) making it a bulletproof solution for the new wave of demanding industrial applications.
|DS12584: Compact and versatile three-phase and three-sense motor driver||1.0||762 KB|
|An introduction to electric motors||1.0||2 MB|
|STSPIN motor drivers||11.2017||1 MB|
|Electric vehicle (EV) ecosystem||1.1||1 MB|
|Motor Control Reference Guide||15.10||2 MB|
|Products and solutions for Smart industry||3.0||2 MB|
|STSPIN Motor Control: Design Considerations for Brushless Direct Current Motor Control||1.0||5 MB|
|X-NUCLEO-IHM16M1||ST||Three-phase brushless DC motor driver expansion board based on STSPIN830 for STM32 Nucleo|
The STSPIN220 stepper motor driver, STSPIN230 brushless DC motor driver, STSPIN240 dual brushed DC motor driver and STSPIN250 single brushed DC motor driver are optimized to deliver low noise, minimal power consumption and standby mode of operation along with features such as extreme position accuracy and motion smoothness with up to 256 micro-steps per step.
Get started on your next design with these tools available from ST for STSPIN220, STSPIN230, STSPIN240 and STSPIN250 using the STM32 ODE Nucleo boards and development software.
STSW-SPIN002 evaluation software with
STSW-SPIN002 - Evaluation software with graphical user interface for STSPIN motor driver ICs
Obtain your free STM32L0 / STM32F0 Professional Developers Package
MDK-ARM-STM32 - MDK-ARM software development environment for Cortex-M based MCUs
The following X-NUCLEO expansion baords X-Cube software support the devices
|Device||X-NUCLEO Board||X-CUBE Software|
X-NUCLEO-IHM06A1 - Low voltage stepper motor driver expansion board based on the STSPIN220 for STM32 Nucleo
X-CUBE-SPN6 - Low voltage stepper motor driver software expansion for STM32Cube
X-NUCLEO-IHM11M1 - Low voltage three-phase brushless DC motor driver expansion board based on STSPIN230 for STM32 Nucleo
X-CUBE-SPN11 - Low voltage three-phase brushless DC motor driver software expansion for STM32Cube
X-NUCLEO-IHM12A1 - Low voltage dual brush DC motor driver expansion board based on STSPIN240 for STM32 Nucleo
X-CUBE-SPN12 - Low voltage dual brush DC motor driver software expansion for STM32Cube
For other STSPIN devices
|Part Number||Marketing Status||Quantity||Unit Price (US$) *||Package||Packing Type||Operating Temperature (°C) (min)||Operating Temperature (°C) (max)||ECCN (US)||Country of Origin||More info||Order from ST||Order from Distributors|
|STSPIN830||Active : Product is in volume production||1000||1.25||TFQFPN 24L 4X4X1.05||Tape And Reel||-40||150||EAR99||PHILIPPINES||MORE INFO||Buy Direct Add to cart||DISTRIBUTOR AVAILABILITY|
|Part Number||Marketing Status||Package||Grade||RoHS Compliance Grade||Material Declaration**|
|STSPIN830||Active||TFQFPN 24L 4X4X1.05||Industrial||Ecopack2|
(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.