The ST25R3911B is a highly integrated NFC Initiator / HF Reader IC, including the analog front end (AFE) and a highly integrated data framing system for ISO 18092 (NFCIP-1) initiator, ISO 18092 (NFCIP-1) active target, ISO 14443A and B reader (including high bit rates), ISO 15693 reader and FeliCa™ reader. Implementation of other standard and custom protocols like MIFARE™ Classic is possible using the AFE and implementing framing in the external microcontroller (Stream and Transparent modes).
The ST25R3911B is positioned perfectly for the infrastructure side of the NFC system, where users need optimal RF performance and flexibility combined with low power.
Thanks to automatic antenna tuning (AAT) technology, the device is optimized for applications with directly driven antennas. The ST25R3911B is alone in the domain of HF reader ICs as it contains two differential low impedance (1 Ohm) antenna drivers.
The ST25R3911B includes several features that make it very suited for low power applications. It contains a low power capacitive sensor that can be used to detect the presence of a card without switching on the reader field. The presence of a card can also be detected by performing a measurement of amplitude or phase of signal on antenna LC tank, and comparing it to the stored reference. It also contains a low power RC oscillator and wake-up timer that can be used to wake up the system after a defined time period, and to check for the presence of a tag using one or more low power detection techniques (capacitive, phase or amplitude).
The ST25R3911B is designed to operate from a wide (2.4 V to 5.5 V) power supply range; peripheral interface IO pins support power supply range from 1.65 V to 5.5 V.
- ISO 18092 (NFCIP-1) Active P2P
- ISO14443A, ISO14443B, ISO15693 and FeliCa™
- Supports VHBR (3.4 Mbit/s PICC to PCD framing, 6.8 Mbit/s AFE and PCD to PICC framing)
- Capacitive sensing - Wake-up
- Automatic antenna tuning system providing tuning of antenna LC tank
- Automatic modulation index adjustment
- AM and PM demodulator channels with automatic selection
- DPO (Dynamic power output)
- Up to 1.4 W in case of differential output
- User selectable and automatic gain control
- Transparent and stream modes to implement MIFARE™ classic compliant or other custom protocols
- Possibility of driving two antennas in single ended mode
- Oscillator input capable of operating with 13.56 MHz or 27.12 MHz crystal with fast start-up
- 6 Mbit/s SPI with 96 bytes FIFO
- Wide supply voltage range from 2.4 V to 5.5 V
- Wide temperature range: -40 °C to 125 °C
- QFN32, 5 mm x 5 mm package
Discover our full range of RFID NFC readers with multiprotocol support for 13.56 MHz, such as ISO 14443 Type A or B, ISO 15693, ISO 18092, ISO 18000-62/63, ISO 29143, FeliCa and NFC Forum protocols.
Recommended for you
LED Lighting and Controls
Medical and Healthcare
Point of Sales and Retail Logistics
Gaming and Drones
|Part Number||Marketing Status||Package||Grade||RoHS Compliance Grade||Material Declaration**|
|VFQFPN 5X5 32L PAD 3.5X3 PUNCHED||Industrial||Ecopack2|
|VFQFPN 5X5X1 32L WETTABLE FLANKS||Industrial||Ecopack2|
|US WF V.I.||Industrial||N/A||
VFQFPN 5X5 32L PAD 3.5X3 PUNCHED
RoHS Compliance Grade
VFQFPN 5X5X1 32L WETTABLE FLANKS
RoHS Compliance Grade
Package:US WF V.I.
US WF V.I.
RoHS Compliance Grade
(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.
Step 1: Purchase Discovery kit, Nucleo board or Evaluation boardX-NUCLEO-NFC05A1
NFC card reader expansion board based on ST25R3911B for STM32 and STM8 NucleosST25R3911B-DISCO
Discovery kit for ST25R3911B high performance HF reader / NFC initiator with 1.4 W output power, VHBR and AATST25R3911B-EMVCO
EMVCo reference design for the ST25R3911B high performance HF reader
Step 2: Download associated softwareX-CUBE-NFC5
High performance HF reader/NFC initiator IC software expansion for STM32CubeSTSW-ST25PC001
Windows® PC software for ISO15693, ISO14443-A/B, NFC and industrial readersSTSW-ST25R001
PC software installer for ST25R3911B-DISCOSTSW-ST25R002
Sources of STM32L4 based firmware for ST25R3911B-DISCOSTSW-ST25R004
Antenna Matching Tool for ST25R NFC/HF reader familySTSW-ST25R009
Linux demo of ST25R3911B for Raspberry Pi using X-NUCLEO-NFC05A1
Step 3: Get trainedST253911B-15 Product Presentation
ST253911B-15 Product Presentation