-
The device is a high-voltage converter that smartly integrates an 800 V avalanche rugged power MOSFET with PWM current-mode control. The power MOSFET with 800 V breakdown voltage allows extended input voltage range to be applied, as well as to reduce the size of the DRAIN snubber circuit. This IC is capable of meeting the most stringent energy-saving standards as it has very low consumption and operates in pulse frequency modulation under light load. The Zero-Power mode (ZPM) feature enables the IC to work in an idle state, where the system is totally shutdown. An MCU can be easily connected to the IC for smart ZPM management and it can be supplied by the IC itself during the idle state. The design of flyback, buck and buck boost converters is supported. The integrated HV startup, sense FET, error amplifier and oscillator with jitter allow a complete application to be designed with a minimum component count. In flyback non isolated topology, a negative output voltage is easily set thanks to the integrated error amplifier with separate ground.
Key Features
- Smart stand-by architecture using the Zero Power Mode (ZPM)
- ZPM management by MCU easily realizable
- 800 V avalanche-rugged power MOSFET allowing ultra wide VAC input range to be covered
- Embedded HV startup and sense-FET
- Current mode PWM controller
- Drain current limit protection (OCP)
- Wide supply voltage range: 4.5 V to 30 V
- Self-supply option allows to remove the auxiliary winding or bias components
- Minimized system input power consumption:
- Less than 4 mW @ 230 VAC in ZPM
- Less than 10 mW @ 230 VAC in no-load condition
- Less than 400 mW @ 230 VAC with 250 mW load
- Jittered switching frequency reduces the EMI filter cost
- 60 kHz ±7% (type L)
- 120 kHz ±7% (type H)
- Embedded E/A with 1.2 V reference and separate ground for easy negative voltage setting
- Protections with automatic restart: overload/short circuit (OLP), max. duty cycle counter, VCC clamp
- Pulse-skip protection to prevent flux-runaway
- Embedded thermal shutdown
- Built in soft start for improved system reliability
Sample & Buy
| Part Number | Package | Packing Type | Marketing Status | Budgetary Price (US$)* | Quantity | RDS(on) (Ω) (max) | Transistor Breakdown Voltage (V) (min) | Drain Current (A) (nom) | ECCN (US) | Country of Origin | More info | Order from Distributors | Order from ST |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| VIPER0PHDTR | SO-16 | Tape And Reel |
Active
|
0.422 | 1000 | 20 | 800 | 0.4 | EAR99 | CHINA | Check Availability | Get sample | |
| VIPER0PLDTR | SO-16 | Tape And Reel |
Active
|
0.422 | 1000 | 20 | 800 | 0.4 | EAR99 | CHINA | Check Availability | Get sample | |
| VIPER0PHD | SO-16 | Tube |
Active
|
0.422 | 1000 | 20 | 800 | 0.4 | EAR99 | CHINA | Check Availability | ||
| VIPER0PLD | SO-16 | Tube |
Active
|
0.422 | 1000 | 20 | 800 | 0.4 | EAR99 | CHINA | No availability of distributors reported, please contact our sales office | Buy now |
VIPER0PHD
Package
SO-16Packing Type
TubeUnit Price (US$)
0.422*(*) Suggested Resale Price per unit (USD) for BUDGETARY USE ONLY. For quotes, prices in local currency, please contact your local ST Sales Office  or our Distributors
Featured Videos
Evaluation Tools
-
-
Picture Part number Manufacturer Description 
STEVAL-ISA174V1 ST 7 W dual output offline flyback converter for home appliances using VIPer0P 
STEVAL-ISA179V1 ST 15 V, 0.15 A buck converter using VIPerâ„¢ Plus - VIPer0P 
STEVAL-ISA180V1 -- 12 V - 0.6 A flyback isolated converter using VIPerâ„¢ Plus - VIPer0P 
STEVAL-ISA181V1 ST 12 V / 600 mA high voltage flyback converter with remote standby control using the VIPer0P 
STEVAL-ISA192V1 ST 7 W dual output flyback converter with standby managed by capacitive touch using VIPer0P and STM32L Part Number7 W dual output offline flyback converter for home appliances using VIPer0P
15 V, 0.15 A buck converter using VIPerâ„¢ Plus - VIPer0P
12 V - 0.6 A flyback isolated converter using VIPerâ„¢ Plus - VIPer0P
12 V / 600 mA high voltage flyback converter with remote standby control using the VIPer0P
7 W dual output flyback converter with standby managed by capacitive touch using VIPer0P and STM32L
-
| Part Number | Marketing Status | Package | Grade | RoHS Compliance Grade | Material Declaration** |
|---|---|---|---|---|---|
| VIPER0PHD |
Active
|
SO-16 | Industrial | Ecopack2 |
|
| VIPER0PHDTR |
Active
|
SO-16 | Industrial | Ecopack2 |
|
| VIPER0PLD |
Active
|
SO-16 | Industrial | Ecopack2 | |
| VIPER0PLDTR |
Active
|
SO-16 | Industrial | Ecopack2 |
(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.
