The STWBC-EP is the digital controller for the wireless battery charger (WBC) transmitters (TX) from STMicroelectronics optimized for Extended Power Profile (EPP) Wireless Power Consortium (WPC) 1.2 certified applications up to 15 W.
It offers the most flexible and efficient solution for controlling the power transfer to a receiver (RX) in WBC-enabled applications such as smartphones, tablets and other battery-powered devices that use the electromagnetic induction for recharging.
The TX is responsible for controlling the transmitting coil and generating the correct amount of power requested by the RX. The RX continuously provides the transmitter with the correct power level requested, by modulating the transmitter carrier through the controlled resistive or capacitive load. Generating the correct amount of power ensures the highest level of end-to-end efficiency due to reduced energy losses. It also helps maintaining a lower operational temperature.
The TX can adapt to the amount of energy transferred by the coil by modulating the frequency, duty cycle or amplitude of the PWM voltage on the transmitting coil.
The STWBC-EP is capable of bidirectional communication with the RX as specified by the WPC 1.2 protocol.
|DS12197: Digital controller for wireless battery chargers transmitters for Qi 15 W applications||1.0||710 KB|
|STWBC-EP Extended Wireless Power||12.2017||817 KB|
|Brochure Power management guide||10.2018||4 MB|
|Wireless Power Transfer||WURTH ELEKTRONIK||Wurth Elektronik Wireless Power Coils offer the best performance with highest Q-factor and lowest RDC values.|
|STSW-ISB044FW||ST||Firmware for the STEVAL-ISB044V1 wireless power transmitter evaluation board based on STBWC-EP|
|STSW-STWBCFWDT||ST||STWBC firmware downloader tool|
|STSW-STWBCGUI||ST||Graphical user interface for wireless power transmitter evaluation boards based on the STWBC chip family|
|STEVAL-ISB044V1||ST||Qi MP-A10 15 W wireless charger TX evaluation kit based on STWBC-EP|
|Contract Design for Manufacturing||LACROIX Electronics||CDM consists in the full design, industrialization and manufacturing of an electronic product performed by LACROIX Electronics teams for manufacturers.|
|Design for eXcellence||LACROIX Electronics||DfX refers to all methods and tools used by LACROIX Electronics to carry out the advanced industrialization of an electronic assembly or sub-assembly.|
|Electronics Manufacturing Services||LACROIX Electronics||LACROIX Electronics supports manufacturers in their electronics subcontracting projects and offers a complete manufacturing and testing service.|
|Evatronix Electronic Design Services||Evatronix||We deliver embedded design services in the fields of electronic and mechanical hardware as well as embedded software.|
|Part Number||Marketing Status||Package||Grade||ECCN (US)||Unit Price (US$) *||Quantity||Country of Origin||Operating Temperature (°C) (max)||Operating Temperature (°C) (min)||Output Power (W) (typ)||More info||Order from ST||Order from Distributors|
|STWBC-EP||Active : Product is in volume production||VFQFPN 32 5x5x1.0||Industrial||3A991A2||3.175||1000||PHILIPPINES||105||-40||15||MORE INFO||Free Sample Add to cart||DISTRIBUTOR AVAILABILITY|
|STWBC-EPTR||Active : Product is in volume production||VFQFPN 32 5x5x1.0||Industrial||3A991A2||3.175||1000||PHILIPPINES||105||-40||15||MORE INFO||Free Sample Add to cart||DISTRIBUTOR AVAILABILITY|
|Part Number||Marketing Status||Package||Grade||RoHS Compliance Grade||Material Declaration**|
|STWBC-EP||Active||VFQFPN 32 5x5x1.0||Industrial||Ecopack2|
|STWBC-EPTR||Active||VFQFPN 32 5x5x1.0||Industrial||Ecopack2|
(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.