-
The LED6001 device is a LED driver that combines a boost controller and a high-side current sensing circuitry optimized for driving one string of high-brightness LEDs. The device is compatible with multiple topologies such as boost, SEPIC and floating load buck-boost. The brightness of the LEDs can be controlled through PWM dimming and analog dimming (10:1 ratio) by means of two independent pins. Enhanced PWM dimming can be obtained thanks to a MOSFET in series with the LED string and directly driven by a dedicated pin.
The high-side current sensing, in combination with a P-channel MOSFET, provides an effective protection in case the positive terminal of the LED string is shorted to ground. The high precision current sensing circuitry allows a LED current regulation reference within ± 4% accuracy over the whole temperature range and production spread.
A fault output (open-drain) informs the host system about faulty conditions: device overtemperature, output overvoltage (disconnected LED string) and LED overcurrent.Key Features
- Switching controller section
- 5.5 V to 36 V input voltage range
- Very low shutdown current: ISHDN< 10 μA
- Internal +5 V LDO for gate driver supply
- Internal +3.3 V LDO for device supply
- Fixed frequency peak current mode control
- Adjustable (100 kHz to 1 MHz) switching frequency
- External synchronization for multi-device applications
- High performance external MOSFET driver
- Cycle-by-cycle external MOSFET OCP
- Fixed internal soft-start
- Programmable output OVP
- Boost, buck-boost and SEPIC topologies supported
- Thermal shutdown with autorestart
- Output short-circuit detection
- LED control section
- Up to 60 V output voltage
- Constant current control loop
- High-side output current sensing circuitry
- 30 to 300 mV differential sensing voltage
- ± 4% output current reference accuracy
- Output overcurrent protection
- Sensing resistor failure protection
- PWM dimming with auxiliary series switch
- Analog dimming
- Switching controller section
Featured Videos
Watch the ALED1262ZT video, an automotive-grade 12-Channel LED Driver for advanced rear lighting solutions
All tools & software
All resources
Product Specifications (1)
Resource title | Latest update | |||
---|---|---|---|---|
14 Apr 2020 |
14 Apr 2020
|
EDA Symbols, Footprints and 3D Models
Quality and Reliability
Part Number | Marketing Status | Package | Grade | RoHS Compliance Grade | Material Declaration** |
---|---|---|---|---|---|
LED6001 |
Active
|
HTSSOP16 | Industrial | Ecopack2 | |
LED6001TR |
Active
|
HTSSOP16 | Industrial | Ecopack2 |
(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.
Sample & Buy
Part Number | Order from Distributors | Order from ST | Marketing Status | ECCN (US) | ECCN (EU) | Packing Type | Package | Temperature (°C) | Country of Origin | Budgetary Price (US$)*/Qty | ||
---|---|---|---|---|---|---|---|---|---|---|---|---|
min | max | |||||||||||
LED6001 | 4 distributors | Buy Direct |
Active
|
EAR99 | NEC | Tube | HTSSOP16 | - | - | PHILIPPINES | 0.945 / 1k | |
LED6001TR | 2 distributors | Free Sample Buy Direct |
Active
|
EAR99 | NEC | Tape And Reel | HTSSOP16 | - | - | PHILIPPINES | 0.945 / 1k |
(*) Suggested Resale Price per unit (USD) for BUDGETARY USE ONLY. For quotes, prices in local currency, please contact your local ST Sales Office or our Distributors