The LD59150 is a 1.5 A LDO regulator, designed for being used in various environments.
The NMOS topology allows RDS(on) of the pass-element to be reduced, which results in a very small dropout voltage even with very low input supply voltage.
Output voltage can be adjusted from 0.8 to 3.6 V, by means of an external resistor divider.
The programmable soft-start circuit offers the possibility to control the inrush current at startup providing a monotonic supply voltage to the load.
The LD59150 has enable pin to turn on/off (EN) the regulator and Power Good to monitor the regulated output voltage (PG).
Combination of both can be used to set a desired power sequence in case of multiple regulated rails.
The LD59150 embeds protection functions, such as: current limit and thermal shutdown.
- Designed for automotive applications
- Dual supply pins
- VIN: 0.8 V to 5.5 V
- VBIAS: 2.7 V to 5.5 V
- VOUT range: 0.8 V to 3.6 V
- Ultra low-dropout: 65 mV typ. (125 mV max.) at 1.5 A
- High VOUT accuracy
- 0.5% typ. at Tamb
- 2% max.
- Power Good function
- Programmable soft-start
- Thermal shutdown
- Current limitation circuit
- Adjustable output voltage
- Stable with low ESR output capacitor (> 2.2 µF)
- Available in DFN10 3 x 3 mm package with wettable flanks
- Operating temperature range: - 40 °C + 125 °C
Recommended for you
Virtual - Augmented Reality
|Part Number||Marketing Status||Package||Grade||RoHS Compliance Grade||Material Declaration**|
|VFQFPN 3X3X0.85 10L PITCH 0.50 A||Automotive||Ecopack2|
(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.