Key Product Benefits
ISM330DLC -inertial measurement unit
This iNEMO inertial measurement unit is well suited to vibration monitoring in industrial environments. It is a highly robust package that offers comparable accuracy with piezoelectric sensors and high speed signal transmission along dedicated paths, as well as ultra-low power consumption.
STM32F4 - MCU with DSP capability
The STM32F4 series microcontroller is chosen for its digital signal processing capabilities and clock speeds in order to manage the very high data rates streaming in from the vibration and environmental sensors.
LPS22HB and HTS221 - environmental sensors
The LPSSHB digital pressure and HTS221 relative humidity and temperature sensors complete the data requirements for a comprehensive condition monitoring scenario.
STM32MP157 - MPU as gateway node
The dual core STM32MP157 microprocessor provides a full computing environment hosting the applications to manage data routed from multiple monitoring nodes. Here, the data can be stored, processed and queued while the same microprocessor manages connectivity handshakes and transmission schedules with centralized condition monitoring and predictive maintenance systems.
- Vibration monitoring data in the form of vibration speed (RMS), peak acceleration, and FFTs performed by STM32 MCU core on data acquired from ST industrial accelerometer.
- Temperature, humidity and pressure data from ST environmental sensors.
- Condition monitoring software support demonstrating Edge node processing in communication with a Cloud application via a secure gateway.
- End-to-end communication framework allowing Condition Monitoring platform to develop into a Predictive Maintenance solution.
- Further processing potential on Edge node with AWS IoT Greengrass and Lambda functions.
- Cloud Dashboard to register and provision the devices, configure a gateway for Edge processing, assign a gateway to a group of devices, analyze real time and historical data, and set thresholds to trigger alerts for specific conditions.
The architecture we propose is based on an STEVAL-IDP004V1 master board and up to four STEVAL-BFA001V1B smart sensor nodes, which export the following condition monitoring data over a serial protocol:
- environmental pressure, humidity, and temperature data
- time and frequency domain vibration data from the embedded accelerometer, processed by STM32F4 microcontroller
The Edge node collects environmental data and FFT data from accelerometers processed by the STEVAL-BFA001V1B kit, which is then sent via MQTT over Ethernet or Wi-Fi to the DSH-PREDMNT dashboard based on the AWS infrastructure.
The data is collected and further processed in an Edge gateway consisting of an STM32MP157C-DK2 kit running X-LINUX- PREDMNT software, which includes the AWS IoT Greengrass service.
The DSH-PREDMNT dashboard completes the journey with a web-based tool to manage device provisioning, configuration, data injection and analysis, and simple thresholds for anomaly detection from a centralized Cloud service.
The AWS IoT Greengrass Edge Computing service allows local computation of Lambda functions on Edge gateway nodes with the same logic available on the Cloud to ensure continuity even when connection to the Cloud is unavailable; shadow devices on the Cloud are automatically synchronized with the Edge nodes as soon as connection is re-established.
Something went wrong with the server request. Please try again in a few moments.
Request for software successfully submitted. The approval process may take up to 48 hours. After you have been approved, you should receive a link to the requested software via email.
Unfortunately, the link you clicked didn't work. Don't worry, here are the steps you can take to get your download started:If you still can't download the software, please reach out to us on the ST Community and we will help you
- Ensure you are using the same browser used to made the initial request
- Check that cookies are allowed in your browser
- Update your browser to its latest version
- Please also note that links forwarded by somebody else will not work
Get the Software
|Part Number||General Description||Marketing Status||Download|
|DSH-PREDMNT||Cloud based web application for condition monitoring and predictive maintenance||Active||Go to site|
|STSW-BFA001V1||Software package for STEVAL-BFA001V1B||Active|
|STSW-IDP4PREDMNT||Predictive maintenance evaluation kit firmware||Active|
|STM32 MPU OpenSTLinux Expansion Pack for Predictive Maintenance application||STM32 MPU OpenSTLinux Expansion Pack for Predictive Maintenance applications||Active||Go to site|
All Evaluation Features
- Optimized form factor: 50mm x 9mm x 9mm
- Designed to meet IEC61000-4-2/4 and EN60947 requirements for industrial applications
- Main supply voltage: 18 V - 32 V
- IO-Link PHY using the L6362A Device transceiver for data communication with host unit
- M12 industrial connector
- SWD connector for debugging and programming capability
- Reset button
- Expansion connector with GPIO, ADC, I2C bus
- Designed to meet IEC industrial standard requirements
- WEEE compliant
- RoHS compliant
- Master IO-Link stack embedded with read out protection
- Limitation of time of use (10000 minutes)
- Fully compatible with all IO-Link devices
- Main supply voltage 32 V maximum
- 4 L6360 IO-Link master transceiver ICs
- RS-485 serial interface
- CAN serial interface
- USB interface
- DC-DC converter
- On-board reverse polarity protection
- Designed to meet IEC requirement for industrial standards
- RoHS and WEEE compliant
- 4-Gbit DDR3L, 16 bits, 533 MHz
- 1-Gbps Ethernet (RGMII) compliant with IEEE-802.3ab
- USB OTG HS
- Audio codec
- 4 user LEDs
- 2 user and reset push-buttons, 1 wake-up button
- V / 3 A USB Type-CTM power supply input (not provided)
- Board connectors: Ethernet RJ454 × USB Host Type-AUSB Type-CTM DRPMIPI DSISMHDMI®Stereo headset jack including analog microphone input microSDTM cardGPIO expansion connector (Raspberry Pi® shields capability)ARDUINO® Uno V3 expansion connectors
- On-board ST-LINK/V2-1 debugger/programmer with USB re-enumeration capability: Virtual COM port and debug port
- 4" TFT 480×800 pixels with LED backlight, MIPI DSISM interface, and capacitive touch panel
- Wi-Fi® 802.11b/g/n
- Bluetooth® Low Energy 4.1
MEMS and Sensors
|HTS221||Capacitive digital sensor for relative humidity and temperature|
|ISM330DLC||iNEMO inertial measurement unit (IMU): 3D accelerometer and 3D gyroscope with digital output for industrial applications|
|LPS22HB||MEMS nano pressure sensor: 260-1260 hPa absolute digital output barometer|
Picture Part number Manufacturer Description AWS IoT Core AWS AWS IoT Core is a managed cloud service that lets connected devices easily and securely interact with cloud applications and other devicesPart Number
AWS IoT Core is a managed cloud service that lets connected devices easily and securely interact with cloud applications and other devices
Picture Part number Manufacturer Description DSH-PREDMNT ST Cloud based web application for condition monitoring and predictive maintenancePart Number
Cloud based web application for condition monitoring and predictive maintenance
Picture Part number Manufacturer Description X-LINUX-PREDMNT ST STM32 MPU OpenSTLinux Expansion Pack for Predictive Maintenance applicationsPart Number
STM32 MPU OpenSTLinux Expansion Pack for Predictive Maintenance applications
Picture Part number Manufacturer Description STM32MP157C-DK2 ST Discovery kit with STM32MP157C MPUPart Number
Discovery kit with STM32MP157C MPU