概要
リソース
ツール & ソフトウェア
ソリューション
eDesignSuite
品質 & 信頼性
Sales Briefcase
はじめる
サンプル & 購入
Partner products
  • This board provides you an easy way to connect STMicroelectronics® VIPower® M0-7 technology into your existing system.The board comes pre-assembled with VN7010AJ high-side driver. On board minimum set of electrical components (as for device datasheet recommendation) is enabling the user to directly connect the load, the power supply and the microcontroller without any additional effort in external component design and connection. The VN7010AJ is a single channel high-side driver manufactured using ST proprietary ®VIPower® technology and housed in PowerSSO-16 package. The device is designed to drive 12 V automotive grounded loads through a 3 V and 5 V CMOS-compatible interface, providing protection and diagnostics. The device integrates advanced protective functions such as load current limitation, overload active management by power limitation and overtemperature shutdown with configurable latch-off. A FaultRST pin unlatches the output in case of fault or disables the latch-off functionality. A dedicated multifunction multiplexed analog output pin delivers sophisticated diagnostic functions including high precision proportional load current sense, supply voltage feedback and chip temperature sense, in addition to the detection of overload and short circuit to ground, short to V CC and OFF-state open-load. A sense enable pin allows OFF-state diagnosis to be disabled during the module low-power mode as well as external sense resistor sharing among similar devices.

    主な特徴

    • Simple single IC application board dedicated for VN7010AJ
    • Provides electrical connectivity and thermal heat-sinking for easy prototyping
    • General device features
      • Single channel smart high-side driver with MultiSense analog feedback
      • Very low standby current
      • Compatible with 3 V and 5 V CMOS outputs
    • Diagnostic functions
      • Multiplexed analog feedback of: load current with high precision proportional current mirror, VCC supply voltage and TCHIP device temperature
      • Overload and short to ground (power limitation) indication
      • Thermal shutdown indication
      • OFF-state open-load detection
      • Output short to VCC detection
      • Sense enable/disable
    • Protections
      • Undervoltage shutdown
      • Overvoltage clamp
      • Load current limitation
      • Self limiting of fast thermal transients
      • Configurable latch-off on overtemperature or power limitation with dedicated fault reset pin
      • Loss of ground and loss of VCC
      • Reverse battery with external components
      • Electrostatic discharge protection

サンプル & 購入

製品型番
製品ステータス
ECCN (US)
Country of Origin
Budgetary Price (US$)*/Qty
STからオーダー
販売代理店からオーダー
EV-VN7010AJ
量産中
EAR99 ITALY 3.92 / 1 購入 在庫チェック

販売代理店在庫EV-VN7010AJ

代理店名
地域 在庫 最小発注 パートナー企業リンク
MOUSER WORLDWIDE 122 1 発注する

代理店レポートによる在庫データ: 2020-05-22

代理店名

MOUSER

在庫

122

Min.Order

1

地域

WORLDWIDE 発注する

代理店レポートによる在庫データ: 2020-05-22

EV-VN7010AJ

製品ステータス

量産中

単価(US$)

3.92

Budgetary Price (US$)*/Qty

3.92 / 1

販売代理店在庫EV-VN7010AJ

代理店名
地域 在庫 最小発注 パートナー企業リンク
MOUSER WORLDWIDE 122 1 発注する

代理店レポートによる在庫データ: 2020-05-22

代理店名

MOUSER

在庫

122

Min.Order

1

地域

WORLDWIDE 発注する

代理店レポートによる在庫データ: 2020-05-22

ECCN (US)

EAR99

Country of Origin

ITALY

(*)概算用の希望小売単価(US$)です。現地通貨でのお見積りについては、STのセールス・オフィスまたは販売代理店までお問い合わせください。

推奨コンテンツ

関連アプリケーション

スマート農業

車載用モータ制御

ソフトウェア製品

    • 製品型番

      Unico GUI - MEMS evaluation kit software package for Linux, Mac OSX and Windows

00 ファイルがダウンロード用に選択されています

技術文書

    • 概要 バージョン サイズ アクション
      DB2168
      VN7010AJ evaluation board
      3.0
      506.31 KB
      PDF
      DB2168

      VN7010AJ evaluation board

法務

    • 概要 バージョン サイズ アクション
      Terms of use 1.7
      57.54 KB
      PDF

      Terms of use

    • Build your ST evaluation High Side Driver Automotive system: thanks to the ST's SPC5-EV-ADIS adapter you can combine the SPC560B-DIS Discovery board along with VIPower easy boards addressing several automotive applications such as front & rear car lighting, automotive resistive, inductive and capacitive loads, automotive smart power distribution, glow plug, heating systems, relay replacement and high power resistive and inductive actuators.

      A broad range of Easy Boards EV-VNx7xxx from 3mΩ to 140mΩ are available on ST.COM. Please find here below a complete list where to select the best boards fitting your application.

      ソリューション・コンポーネント
      製品型番 概要 ステータス コア製品 価格 (US$)*
      発注 / ダウンロード
      すべて購入
      SPC56B-Discovery

      主な特徴

      • SPC560B54L5 32-bit 48 MHz e200z0h CPU, 32-bit Power Architecture® Technology CPU, 768 kB Code Flash in an LQFP144 package.
      • On-board USB-JTAG PLS debugger and HW selection mode to use stand-alone JTAG debuggers.
      • Board power supply: through external +12 V PSU or from the USB bus (5 V supply voltage).
      • Seven LEDs: D6 for 5 V power on,D2 for Reset, D101, D102, D103 for PLS debugger section, D7 and D8 for PC3 and PC2 outputs
      • Two push buttons (reset and user)
      • A potentiometers for ADC input (user)
      • Two extension headers (2 x 36 pin - 100 mil) for all LQFP144 pins and for quick connection to prototyping boards, additional modules and easy probing.
      • JTAG interface (2 x 7 male 100mil connector)
      • USB port (mini -B)
      • 16 MHz crystal
      • Specification:
        • Board size 100 x 65 mm
        • MCU: SPC560B54L5 - LQFP144
        • 2 extension headers 2 x 36 pin - 100 mil
        • DC connector (+12 V input)
        • Mini USB - B
        • JTAG 2 x 7 - 100 mil connector

      続きを読む

      Discovery Kit for SPC56 B line - with SPC560B54L5 MCU
      量産中
      85.75 購入
      SPC5-EV-ADIS

      主な特徴

      • Board size 100 x 55 mm
      • Two extension headers (2 x 36 pin - 100 mil) for quick connection to SPC560B-DIS discovery board
      • Extension headers for quick connection of M0-7 easy board
      • Extension headers for quick connection of H-Bridge easy board
      • Controllable by dedicated GUI for HSD or for H-Bridge available on www.st.com
      • Free ready to run application firmware for HSD or for H-Bridge available on www.st.com, to support quick evaluation and development

      続きを読む

      Adapter board
      量産中
      32.12 購入
      EV-VN7010AJ

      主な特徴

      • Simple single IC application board dedicated for VN7010AJ
      • Provides electrical connectivity and thermal heat-sinking for easy prototyping
      • General device features
        • Single channel smart high-side driver with MultiSense analog feedback
        • Very low standby current
        • Compatible with 3 V and 5 V CMOS outputs
      • Diagnostic functions
        • Multiplexed analog feedback of: load current with high precision proportional current mirror, VCC supply voltage and TCHIP device temperature
        • Overload and short to ground (power limitation) indication
        • Thermal shutdown indication
        • OFF-state open-load detection
        • Output short to VCC detection
        • Sense enable/disable
      • Protections
        • Undervoltage shutdown
        • Overvoltage clamp
        • Load current limitation
        • Self limiting of fast thermal transients
        • Configurable latch-off on overtemperature or power limitation with dedicated fault reset pin
        • Loss of ground and loss of VCC
        • Reverse battery with external components
        • Electrostatic discharge protection

      続きを読む

      VN7010AJ Evaluation Board
      量産中
      VN7010AJTR 4.12 購入
      STSW-SPC5EV-ADIS

      主な特徴

      • Complete Graphical User Interface (GUI) for SPC5EV-ADIS adapter board.

      続きを読む

      SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers
      量産中
      -
      ソフトウェア
      製品型番 Software Version 製品ステータス サプライヤ ダウンロード
      STSW-SPC5EV-ADIS 1.0.0 Active ST
      SPC56B-Discovery

      Description:

      Discovery Kit for SPC56 B line - with SPC560B54L5 MCU

      価格 (US$)*

      85.75

      Key features

      • SPC560B54L5 32-bit 48 MHz e200z0h CPU, 32-bit Power Architecture® Technology CPU, 768 kB Code Flash in an LQFP144 package.
      • On-board USB-JTAG PLS debugger and HW selection mode to use stand-alone JTAG debuggers.
      • Board power supply: through external +12 V PSU or from the USB bus (5 V supply voltage).
      • Seven LEDs: D6 for 5 V power on,D2 for Reset, D101, D102, D103 for PLS debugger section, D7 and D8 for PC3 and PC2 outputs
      • Two push buttons (reset and user)
      • A potentiometers for ADC input (user)
      • Two extension headers (2 x 36 pin - 100 mil) for all LQFP144 pins and for quick connection to prototyping boards, additional modules and easy probing.
      • JTAG interface (2 x 7 male 100mil connector)
      • USB port (mini -B)
      • 16 MHz crystal
      • Specification:
        • Board size 100 x 65 mm
        • MCU: SPC560B54L5 - LQFP144
        • 2 extension headers 2 x 36 pin - 100 mil
        • DC connector (+12 V input)
        • Mini USB - B
        • JTAG 2 x 7 - 100 mil connector

      続きを読む

      SPC5-EV-ADIS

      Description:

      Adapter board

      価格 (US$)*

      32.12

      Key features

      • Board size 100 x 55 mm
      • Two extension headers (2 x 36 pin - 100 mil) for quick connection to SPC560B-DIS discovery board
      • Extension headers for quick connection of M0-7 easy board
      • Extension headers for quick connection of H-Bridge easy board
      • Controllable by dedicated GUI for HSD or for H-Bridge available on www.st.com
      • Free ready to run application firmware for HSD or for H-Bridge available on www.st.com, to support quick evaluation and development

      続きを読む

      EV-VN7010AJ

      Description:

      VN7010AJ Evaluation Board

      価格 (US$)*

      4.12

      Key features

      • Simple single IC application board dedicated for VN7010AJ
      • Provides electrical connectivity and thermal heat-sinking for easy prototyping
      • General device features
        • Single channel smart high-side driver with MultiSense analog feedback
        • Very low standby current
        • Compatible with 3 V and 5 V CMOS outputs
      • Diagnostic functions
        • Multiplexed analog feedback of: load current with high precision proportional current mirror, VCC supply voltage and TCHIP device temperature
        • Overload and short to ground (power limitation) indication
        • Thermal shutdown indication
        • OFF-state open-load detection
        • Output short to VCC detection
        • Sense enable/disable
      • Protections
        • Undervoltage shutdown
        • Overvoltage clamp
        • Load current limitation
        • Self limiting of fast thermal transients
        • Configurable latch-off on overtemperature or power limitation with dedicated fault reset pin
        • Loss of ground and loss of VCC
        • Reverse battery with external components
        • Electrostatic discharge protection

      続きを読む

      STSW-SPC5EV-ADIS

      Description:

      SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers

      価格 (US$)*

      -
      ソフトウェア

      Key features

      • Complete Graphical User Interface (GUI) for SPC5EV-ADIS adapter board.

      続きを読む

      製品型番 Software Version 製品ステータス サプライヤ ダウンロード
      STSW-SPC5EV-ADIS 1.0.0 Active ST

製品型番 製品ステータス RoHSコンプライアンスグレード WEEE Compliant 材料宣誓書**
EV-VN7010AJ
量産中
Not compliant -

EV-VN7010AJ

Package:

Not compliant

Material Declaration**:

Marketing Status

量産中

RoHS Compliance Grade

Not compliant

WEEE Compliant

-

(**) st.comで提供している材料宣誓書は、パッケージ・ファミリ内で最も一般的に使用されているパッケージに基づく汎用ドキュメントの場合があります。そのため、特定の製品では100%正確ではない可能性があります。特定の製品情報については、セールスサポートまでお問い合わせください