-
The L6362A is an IO-Link and SIO mode transceiver device compliant to PHY2 (3-wire connection) supporting COM1 (4.8 kbaud), COM2 (38.4 kbaud) and COM3 (230.4 kbaud) modes. The output stage can be configured as high-side, low-side or push-pull and it can drive resistive, capacitive and inductive loads. It can be connected to a sensor chip with the industrial 24 V environment. The industrial environment could be a PLC, an IO-Link master, a relay or a valve. The L6362A is protected against reverse polarity, among VCC, GND, OUTH, OUTL and I/Q pins. Furthermore, the IC is protected against output short-circuit, overvoltage and impulse voltage withstand (±1 kV pulse amplitude, 1.2/50 μs pulse duration, 500 Ω source impedance).
主な特徴
- Supply voltage from 7 V to 36 V
- 5 V and 3.3 V compatible I/Os
- 5 V or 3.3 V, 10 mA selectable linear regulator
- 0.3 A output current intervention threshold
- Fully protected
- Reverse polarity
- Overload with cut-off function
- Overtemperature
- Undervoltage and overvoltage
- GND and VCC open wire
- -40 to +125 °C operating ambient temperature
- Selectable output stages: high-side, low-side, push-pull
- Suitable to drive L, C and R loads
- 30 μF output load drive capability
- Switching capability of inductors up to 500 mJ
- Wake-up detection supported
- Fast demagnetization of inductive loads
- COM1, COM2 and COM3 mode supported
- Designed to meet:
- Burst IEC 61000-4-4
- ESD IEC 61000-4-2
- Surge EN60947-5-2
- Miniaturized VFDFPN 12L (3x3x0.90 mm) package
サンプル & 購入
| 製品型番 | パッケージ | 梱包タイプ | 製品ステータス | 概算価格（USS） | Quantity | ECCN (US) | Country of Origin | 販売代理店からオーダー | STからオーダー |
|---|---|---|---|---|---|---|---|---|---|
| L6362ATR | VFDFPN 12 3X3X0.9 | Tape And Reel | Active | 1.022 | 1000 | EAR99 | PHILIPPINES | 在庫チェック | 購入 |
(*) Suggested Resale Price per unit (USD) for BUDGETARY USE ONLY. For quotes, prices in local currency, please contact your local ST Sales Office or our Distributors
ビデオ
The first ST intelligent power switch with galvanic isolation on chip
開発環境
-
-
Picture 製品型番 製造元 概要 
P-NUCLEO-IOD01A1 ST STM32 Nucleo pack for IO-Link device fully compatible with IO-Link v1.1 (PHY and stack) 製品型番STM32 Nucleo pack for IO-Link device fully compatible with IO-Link v1.1 (PHY and stack)
-
評価ツール
-
-
Picture 製品型番 製造元 概要 
STEVAL-BFA001V1B ST Predictive maintenance kit with sensors and IO-Link capability 
STEVAL-BFA001V2B ST Multi-sensor predictive maintenance kit with IO-Link stack v.1.1 
STEVAL-IDP003V1 ST IO-Link industrial modular sensor board based on L6362A 
STEVAL-IFP017V3 ST Evaluation board for IO-Link transceiver device L6362A 
STEVAL-IOD003V1 ST IO-Link (PHY) device evaluation board based on L6362A with Arduino connectors for STM32 Nucleo 製品型番Predictive maintenance kit with sensors and IO-Link capability
Multi-sensor predictive maintenance kit with IO-Link stack v.1.1
IO-Link industrial modular sensor board based on L6362A
Evaluation board for IO-Link transceiver device L6362A
IO-Link (PHY) device evaluation board based on L6362A with Arduino connectors for STM32 Nucleo
-
| 製品型番 | 製品ステータス | パッケージ | グレード | RoHSコンプライアンスグレード | 材料宣誓書** |
|---|---|---|---|---|---|
| L6362ATR | Active | VFDFPN 12 3X3X0.9 | インダストリアル | Ecopack2 |
(**) st.comで提供している材料宣誓書は、パッケージ･ファミリ内で最も一般的に使用されているパッケージに基づく汎用ドキュメントの場合があります。そのため、特定の製品では100%正確ではない可能性があります。特定の製品情報については、セールスサポートまでお問い合わせください
