ST's 10 to 36 V series of high-voltage op-amps offers many possible combinations of power consumption and gain bandwidth. Our wide range of devices allows customers to get the best performance for the appropriate accuracy. The high-voltage series of operational amplifiers simplifies the design of sensors for applications from automotive electronics to smart buildings and industrial controls.
Benefiting from the advanced BiCMOS manufacturing process developed in house, the TSB series of 36 V rail-to-rail op-amps delivers the same bandwidth as traditional LM324 operational amplifier, but with a power consumption 4 times lower.
With its high tolerance to ESD and stable performance over a wide temperature range, the TSB series of op-amps gives designers peace of mind.

精选 视频
特别推荐
TSB582: High output current (200mA) 36V BiCMOS dual operational amplifier
Available in space saving packages with minimized thermal resistance due to exposed pads, the TSB582 is a dual operational amplifier with embedded thermal shutdown and output current limiter for both industrial and automotive applications.
In closed-loop motor control systems a preferred way to read out the shaft’s angular position is the rotary resolver. Resolvers can be found in various applications, from light industrial to heavy duty, such as: servo motor feedback, oil and gas production, jet engine fuel systems, aircraft flight surface actuators, communication position systems, steering wheels or vehicle control systems.
Since the primary winding is typically powered through a rotary transformer, no brushes or rings are needed. This increases the overall reliability and robustness of the resolver and makes it perfectly suitable for harsh environments with varying temperature and in oily, dusty, or humid surroundings.
The TSB582 was originally designed to manage the power amplification to pilot the primary winding of a resolver device. Thanks to a wide supply voltage range (4 to 36V) the TSB582 is also an excellent fit for power demanding applications like: AC and DC power sources, valve drivers, line drivers, LED drivers and servo drivers.
TSB series: 36 V op amps for automotive and industrial applications
除了出色的速度/功率比外,我们的36 V TSB 系列运算放大器还具有出色的功率密度、高ESD耐受性和低功耗等优点:
• TSB511、TSB512、TSB514均属于6 MHz带宽放大器系列,具有轨对轨输入和输出功能,能保证在2.7至36 V单电源以及±1.35至±18 V双电源下工作。
• 380µA/2.5 MHz TSB57运算放大器的稳定性和稳健性使其成为广泛电压应用的理想解决方案。提供单通道(TSB571)和双通道(TSB572)版本。
• 我们的100µA/560 kHz TSB61运算放大器可在-40°C至125°C的温度范围内工作,非常适合工业和汽车应用,同样提供单通道(TSB611)和双通道(TSB612)版本。
查看我们全新的TSB612YST和TSB612IYDT(符合AEC Q100及Q003标准)。
我们的TSB622 双放大器还实现了出色的速度/功耗比和1.7 MHz增益带宽积,并且每个放大器在36 V的电压下消耗的电流低于375 μA。
• 宽带宽、高转换速率、低噪声、轨对轨能力和精度的结合,使我们的1.8 mA/6 MHz TSB711(单通道)和TSB712(双通道)运算放大器适用于各种应用,包括滤波器、电源和电机控制、执行器驱动、霍尔效应传感器和电阻传感器。另提供22 MHz版本:TSB7191 (单通道)和TSB7192(双通道)
- TS9511 Precision rail-to-rail input/output 3 MHz single operational amplifier
- TSB712A Precision, 6 MHz, RR IO, 36 V BiCMOS operational amplifier
- TSB512 Rail-to-rail inputs and outputs, 36 V, 6 MHz op-amps
- TS942A Ultra-micropower amplifier with CMOS inputs
- TS944A Ultra-micropower amplifier with CMOS inputs
- TSB712 Precision, 6 MHz, RR IO, 36 V BiCMOS operational amplifier
- TS922A Excellent audio performance / low distortion (0.005%)
- TS912A Low power with CMOS inputs
- TSB611 Low power, rail-to-rail output, 36V operational amplifier
- TSB572 Low-power, 2.5 MHz, RR IO, 36 V BiCMOS operational amplifier
- TS931A Micropower amplifier with CMOS inputs
- TSX9291 Large bandwidth (16MHz), rail-to-rail 16V CMOS Op-Amp, single
- TSX631 Micropower (60uA), rail-to-rail 16V CMOS Op-Amp, single, GBP 200kHz
- TSX631A Micropower (60uA), rail-to-rail 16V CMOS Op-Amp, single, GBP 200kHz, low offset voltage version
- TS941A Ultra-micropower amplifier with CMOS inputs
- TSB7191A Precision, 22 MHz, RR IO, 36 V BiCMOS operational amplifier
- TSB7191 Precision, 22 MHz, RR IO, 36 V BiCMOS operational amplifier
- TSB711A Precision, 6 MHz, RR IO, 36 V BiCMOS operational amplifier
- TSB7192 Precision, 22 MHz, RR IO, 36 V BiCMOS operational amplifier
- TSB711 Precision, 6 MHz, RR IO, 36 V BiCMOS operational amplifier
- TSX564A Micropower (235uA), 16V CMOS Op-Amps, quad, low offset voltage version
- TSX564 Micropower (235uA), 16V CMOS Op-Amps, quad, GBP 900kHz
- TSX921 Large bandwidth (10MHz), rail-to-rail 16V CMOS Op-Amp, single
- TS512A Low noise & distortion (8nV/sqrtHz & 0.03%)
- TS924A Excellent audio performance / low distortion (0.005%)
- TSB511 Rail-to-rail inputs and outputs, 36 V, 6 MHz op-amps
- TSX561 Micropower (235uA), 16V CMOS Op-Amp, single, GBP 900kHz
- TSB612 Low power, rail-to-rail output, 36V operational amplifier
- TSB7192A Precision, 22 MHz, RR IO, 36 V BiCMOS operational amplifier
- TS524 Very low noise suitable for audio applications (4.5nV/sqrtHz)
- TS974 Output rail-to-rail very low-noise op-amps
- TS522 Very low noise suitable for audio applications (4.5nV/sqrtHz)
- TS972 Output rail-to-rail very low-noise op-amps
- TS514 Low noise & distortion (8nV/sqrtHz & 0.03%)
- TS971 Output rail-to-rail very low-noise op-amps
- TS512 Low noise & distortion (8nV/sqrtHz & 0.03%)
- TS954 Real input & output rail to rail / low distortion (0.01%)
- TS952 Real input & output rail to rail / low distortion (0.01%)
- TS951 Real input & output rail to rail / low distortion (0.01%)
- TS944 Ultra-micropower amplifier with CMOS inputs
- TSB582 High output current with thermal shutdown and output current limiter, 3.1 MHz, 36 V, BiCMOS dual operational amplifier
- TS942 Ultra-micropower amplifier with CMOS inputs
- TSX632 Micropower (60uA), rail-to-rail 16V CMOS Op-Amps, dual, GBP 200kHz
- TS941 Ultra-micropower amplifier with CMOS inputs
- TS934 Micropower amplifier with CMOS inputs
- TSX562A Micropower (235uA), 16V CMOS Op-Amps, dual, GBP 900kHz, low offset voltage version
- TSX634A Micropower (60uA), rail-to-rail 16V CMOS Op-Amps, quad, GBP 200kHz, low offset voltage version
- TSX562 Micropower (235uA), 16V CMOS Op-Amps, dual, GBP 900kHz
- TSX632A Micropower (60uA), rail-to-rail 16V CMOS Op-Amps, dual, GBP 200kHz, low offset voltage version
- TSX561A Micropower (235uA), 16V CMOS Op-Amp, single, GBP 900kHz, low offset voltage version
- TSX634 Micropower (60uA), rail-to-rail 16V CMOS Op-Amps, quad, GBP 200kHz
- TSB514 Rail-to-rail inputs and outputs, 36 V, 6 MHz op-amps
- TS9222 Precision rail-to-rail high output current op-amps
- TS9224 Precision rail-to-rail high output current op-amps
- TSB622 Low power, 1.7MHz, rail-to-rail output, 36V operational amplifier
- TS914A Low power with CMOS inputs
- TS931B Micropower amplifier with CMOS inputs
- TS932 Micropower amplifier with CMOS inputs
- LM258A Low-power dual operational amplifiers
- TS931 Micropower amplifier with CMOS inputs
- TS934A Micropower amplifier with CMOS inputs
- TS912B Low power with CMOS inputs
- TS925 Excellent audio performance / low distortion (0.005%)
- TS924 Rail-to-rail high output current op-amps
- TS922 Excellent audio performance / low distortion (0.005%)
- TS921 Rail-to-rail high output current op-amps
- TSB571 Low-power, 2.5 MHz, RR IO, 36 V BiCMOS operational amplifier
- TS914 Low power with CMOS inputs
- TS464 Output rail-to-rail op-amps
- TS462 Output rail-to-rail op-amps
- TS912 Low power with CMOS inputs
- TS461 Output rail-to-rail op-amps
eDesignSuite
eDesignSuite is a comprehensive set of easy-to-use design-aid utilities ready to help you streamline the system development process with a wide range of ST products.