High-side switches can safely drive high currents into complex (resistive, inductive and capacitive) grounded loads in compliance with the harsh automotive environment. This requires both a robust, low on-resistance power switch and accurate analog circuitry for diagnostic, protection and control functions.
ST’s VIPower® family consists of a set of automotive-qualified high-side switches covering the full load range in terms of type and rated power and includes state-of-the-art embedded control functions and a brand-new protection mechanism. This offer represents the ideal solution for car systems such as junction boxes, interior/exterior lighting and DC motor driving as well as every application inside and outside the transportation domain requiring a protected 12V battery line.
精选 视频
Leading-edge product portfolio for a wide range of automotive applications
Electro-thermal simulator for devices in ViPower technology
VIPower Zero series drive Automotive Heating Systems
ST’s VIPower® Zero series offers innovative and high-performance protected switches for driving high-power loads.
This series covers today’s growing demand for intelligent high-side switches able to drive and protect high-power loads such as automotive heating systems including seat-heating, window defroster, cabin and steering heaters.
In addition to outstanding thermal performances in tiny and eco-friendly packages, this series is perfect for Start & Stop systems and other applications required to work at very low battery voltages (device option).
The VIPower Zero series is also suitable for high-current fan motors and protected battery lines in electrical power distribution systems.
Key features
- Complete family of low on-resistance protected solutions
- Output re-activation during reverse polarity
- State-of-the-art and adaptable protection strategy
- Advanced diagnostics
- Cold-cranking capability (device option)
Check this page out for further information about automotive heating systems.
z
VIPower® Zero系列
ST 推出了高侧开关的新家族，它具有超低导通电阻和扩展的电流感应，能与汽车完美结合，保护高功耗负载。 VIPower® Zero器件能有效地替换汽车应用中的机电继电器，如电气功耗分布系统中的高电流风扇电机、加热器和保护性电池线。
- 低导通电阻保护解决方案
- 反向极性期间输出重激活
- 最先进的、可适配的保护策略
- 先进的诊断能力
- 冷启动能力（VN7003Axx）
- VN750PS-E High side driver
- VND5004BSP30-E Double 4m Ohm high side driver with analog current sense for automotive applications
- VN5160S-E Single channel high side drive for automotive applications
- VNQ600AP-E Quad channel high side driver with analog current sense for automotive applications
- VN920B5-E SINGLE CHANNEL HIGH SIDE SOLID STATE RELAY
- VN5050AJ-E Single channel high side driver
- VN800PT-E High Side Driver
- VN5E050J-E Single channel high side driver for automotive applications
- L9380 Triple high-side MOSFET driver
- VN7007AH High side driver with current sense analog feedback for automotive applications
- VN7007ALH High side driver with current sense analog feedback for automotive applications
- VN5E016AFH-E 16 mOhm high-side driver with analog current sense
- VND830P-E Double channel high-side driver
- VND5E012MY-E Double channel high-side driver with analog current sense for automotive applications
- VND5E050MCK-E Double channel high side driver with analog current sense for automotive applications
- VND5E004ASP30-E Double 4 milliohm high-side driver with analog current sense for automotive applications
- VND5E050ACK-E Double channel high side driver with analog current sense for automotive applications
- VND5E050MCJ-E Double channel high side driver with analog current sense for automotive applications
- VNQ660SP QUAD CHANNEL HIGH SIDE SOLID STATE RELAY
- VND5E050K-E Double channel high side driver for automotive applications
- VND5050J-E Double channel high side driver with analog current sense
- VN820-E High Side Driver
- VN800PS-E High-side driver
- VND5160AJ-E Double channel high side driver with analog current sense for automotive applications
- VN750SMP-E High side driver
- VN5E016AH-E 16 mΩ high-side driver with analog current sense
- VND5004ASP30-E Double 4mOhm high side driver with analog current sense for automotive applications
- VND5050K-E Double channel high side driver with analog current sense
- VNQ7040AY Quad channel high-side driver with MultiSense analog feedback for automotive applications
- VN7016AJ High-side driver with MultiSense analog feedback for automotive applications
- VN7140AJ High-side driver with MultiSense analog feedback for automotive applications
- VND7050AJ Double channel high-side driver with MultiSense analog feedback
- VNQ7E100AJ Quad channel high-side driver with MultiSense analog feedback for automotive applications
- VND7E050AJ Double-channel HSD with Current Sense analog feedback
- VN7140AS Single-channel HSD with analog current sense
- VNQ5027AK-E Quad channel high side driver with analog current sense for automotive applications
- VN7040AS High-side driver with MultiSense analog feedback for automotive applications
- VN7010AJ High-side driver with MultiSense analog feedback for automotive applications
- VND7012AY Double channel high-side driver with MultiSense analog feedback
- VND7020AJ Double channel high-side driver with MultiSense analog feedback for automotive applications
- VN7050AJ High-side driver with MultiSense analog feedback for automotive applications
- VND7030AJ Double channel high-side driver with MultiSense analog feedback for automotive applications
- VND5E004A-E Double 4 mOhm high-side driver with analog current sense
- VND5E050J-E Double channel high side driver for automotive applications
- VN5E050MJ-E Single-channel high-side driver with analog current sense for automotive applications
- VND5E006ASP-E Double channel high-side driver with analog current sense for automotive applications
- VNQ500 Quad channel high-side driver
- VND600P-E Double channel high-side solid state relay
- VNQ7050AJ Quad-channel HSD with analog current sense
- VN7140AS12 Single-channel HSD with analog current sense
- VND7140AJ Double channel high-side driver with MultiSense analog feedback
- VND7040AJ Double-channel HSD with MultiSense analog feedback
- VND5E025BK-E Double channel high-side driver with analog current sense for automotive applications
- VNQ7140AJ Quad channel high-side driver with MultiSense analog feedback for automotive applications
- VN7016AJEP High-side driver with MultiSense analog feedback for automotive applications
- VN7003AH High-side driver with Current Sense analog feedback for automotive applications
- VN5E160MS-E Single-channel high-side driver with analog for automotive applications
- VND5160J-E Double channel high side driver for automotive applications
- VN7050AS High-side driver with MultiSense analog feedback for automotive application
- VN7040AJ High-side driver with MultiSense analog feedback for automotive applications
- VND810P-E Standard Functions, High Side Switches
- VN7020AJ High-side driver with MultiSense analog feedback for automotive application
- VN920SP-E SINGLE CHANNEL HIGH SIDE SOLID STATE RELAY
- VN5016AJ-E Single channel high side driver with analog current sense for automotive applications
- VND5050AK-E Double channel high side driver with analog current sense for automotive applications
- VNQ5E250AJ-E Standard Functions, High Side Switches
- VNQ5E160AK-E Quad channel high side driver with analog current sense for automotive applications
- VND7004AY Double channel high-side driver with MultiSense analog feedback for automotive applications
- VN7008AJ High-side driver with MultiSense analog feedback
- VND5E008MY-E Double channel high-side driver with analog current sense for automotive applications
- VNQ5E160MK-E Quad channel high-side driver with analog current sense for automotive applications
- VN7004CH High-side driver with CurrentSense analog feedback for automotive applications
- VND5E025AK-E Double channel high-side driver with analog current sense for automotive applications
- VN7004CLH High-side driver with CurrentSense analog feedback for automotive applications
- VN5E160S-E Single channel high side driver for automotive applications
- VND600SP-E DOUBLE CHANNEL HIGH SIDE SOLID STATE RELAY
- VND7E040AJ Double-channel HSD with Current Sense analog feedback
- VND5050AJ-E Double channel high side driver with analog current sense
- VND5004A-E Double 4mOhm high side driver with analog current sense for automotive applications
- VN5E025AJ-E Single channel high side driver with analog current sense for automotive applications
- VN5E050AJ-E Single channel high side driver with analog current sense for automotive applications
- VND5E160AJ-E Double channel high side driver with analog current sense for automotive applications
- VND830SP-E DOUBLE CHANNEL HIGH SIDE DRIVER
- VN5012AK-E Single channel high side switch
- VND5E160J-E Double channel high side driver for automotive applications
- VN5010AK-E Single channel high side switch
- VN5E050ASO-E Single channel high side driver with analog current sense for automotive applications
- VN5E160ASO-E Single channel high side driver with analog for automotive applications
- VNQ5050K-E Quad channel high side driver with analog current sense for automotive applications
- VN750-E High Side Driver
- VPS2535H Double channel high-side driver with analog current sense
- VND5E025AY-E Double-channel high-side driver with analog current sense for automotive applications
- VN7003ALH Single channel 3 mOhm High-side driver with Current Sense analog feedback for automotive applications
- VNQ5E050K-E Quad channel high side driver for automotive applications
- VN5E025MJ-E Single channel high side driver with analog current sense for automotive applications
- VN5050J-E Single channel high side driver for automotive applications
- VNQ5050AK-E Quad channel high side driver with analog current sense for automotive application
- VN5E025ASO-E Single channel high side driver with analog current sense for automotive applications
- VNQ5E160K-E Quad channel high side driver for automotive applications
- VND7050AJ12 Double channel high-side driver with MultiSense analog feedback
- VND7140AJ12 Double channel high-side driver with MultiSense analog feedback
- VND5E025AS-E Double-channel high-side driver with analog current sense for automotive applications
- VN5E010MH-E Single-channel high-side driver with analog current sense for automotive applications
- VND5E050ASO-E Double channel high side driver with analog current sense for automotive applications
- VND5E160ASO-E Double channel high side driver with analog current sense for automotive applications
- VNQ690SP-E QUAD CHANNEL HIGH SIDE SOLID STATE RELAY
- VND5E160MJ-E Double-channel high-side driver with analog current sense for automotive applications
- VN5E160AS-E Single channel high side driver with analog for automotive applications
- VND5E025LK-E Double channel high side driver with analog current sense for automotive applications
- VND5E012AY-E Double channel high side driver with analog current sense for automotive applications
- VND5E008AY-E Double channel high side driver with analog current sense for automotive applications
- VNQ830P-E Quad channel high-side driver
- VN5E010AH 10 milliohm high-side driver with analog current sense for automotive applications
- VND810PEP-E DOUBLE CHANNEL HIGH SIDE DRIVER
- VND5E025MK-E Double-channel high-side driver with analog current sense for automotive applications
- VNQ5160K-E Quad channel high side driver with analog current sense for automotive applications
- VNQ5E050MK-E Quad channel high-side driver with analog current sense for automitive applications
- VND5E050ACJ-E Double channel high side driver with analog current sense for automotive applications
- VN5E016MH-E 16 mOhm high side driver with analog current sense for automotive applications
- VNQ5E050AK-E Quad channel high side driver with analog current sense for automotive applications
- VND5012AK-E Double channel high side driver with analog current sense for automotive applications
- VN5E006ASP-E Single channel high-side driver with analog current sense for automotive applications
- VN5025AJ-E Single channel high side driver
- VND7E025AJ Double channel high-side driver with MultiSense analog feedback for automotive applications
- VN7E010AJ High-side driver with MultiSense analog feedback for automotive applications
- VNQ600P-E Quad channel high side driver with analog current sense for automotive applications
- VND5025AK-E Double channel high side driver with analog current sense
-
-
Build your ST evaluation High Side Driver Automotive system: thanks to the ST's SPC5-EV-ADIS adapter you can combine the SPC560B-DIS Discovery board along with VIPower easy boards addressing several automotive applications such as front & rear car lighting, automotive resistive, inductive and capacitive loads, automotive smart power distribution, glow plug, heating systems, relay replacement and high power resistive and inductive actuators.
A broad range of Easy Boards EV-VNx7xxx from 3mΩ to 140mΩ are available on ST.COM. Please find here below a complete list where to select the best boards fitting your application.
Solution Components
产品型号 描述 状态 Core Products Price (US$)* Order / DownloadSPC56B-Discovery 主要特性
- SPC560B54L5 32-bit 48 MHz e200z0h CPU, 32-bit Power Architecture® Technology CPU, 768 kB Code Flash in an LQFP144 package.
- On-board USB-JTAG PLS debugger and HW selection mode to use stand-alone JTAG debuggers.
- Board power supply: through external +12 V PSU or from the USB bus (5 V supply voltage).
- Seven LEDs: D6 for 5 V power on,D2 for Reset, D101, D102, D103 for PLS debugger section, D7 and D8 for PC3 and PC2 outputs
- Two push buttons (reset and user)
- A potentiometers for ADC input (user)
- Two extension headers (2 x 36 pin - 100 mil) for all LQFP144 pins and for quick connection to prototyping boards, additional modules and easy probing.
- JTAG interface (2 x 7 male 100mil connector)
- USB port (mini -B)
- 16 MHz crystal
- Specification:
- Board size 100 x 65 mm
- MCU: SPC560B54L5 - LQFP144
- 2 extension headers 2 x 36 pin - 100 mil
- DC connector (+12 V input)
- Mini USB - B
- JTAG 2 x 7 - 100 mil connector
Discovery Kit for SPC56 B line - with SPC560B54L5 MCU 批量生产85.75 立即购买 SPC5-EV-ADIS 主要特性
- Board size 100 x 55 mm
- Two extension headers (2 x 36 pin - 100 mil) for quick connection to SPC560B-DIS discovery board
- Extension headers for quick connection of M0-7 easy board
- Extension headers for quick connection of H-Bridge easy board
- Controllable by dedicated GUI for HSD or for H-Bridge available on www.st.com
- Free ready to run application firmware for HSD or for H-Bridge available on www.st.com, to support quick evaluation and development
Adapter board 批量生产32.12 立即购买 EV-VN7003AH VN7003AH Evaluation Board 批量生产VN7003AHTR 3.92 EV-VN7003ALH VN7003ALH Evaluation Board 批量生产VN7003ALHTR 3.92 EV-VN7004CH VN7004CH Evaluation Board 批量生产VN7004CHTR 4.12 立即购买 EV-VN7004CLH VN7004CLH Evaluation Board 批量生产VN7004CLHTR 4.12 立即购买 EV-VN7007AH VN7007AH Evaluation Board 批量生产VN7007AHTR 4.12 立即购买 EV-VN7007ALH VN7007ALH Evaluation Board 批量生产VN7007ALHTR 3.92 EV-VN7010AJ VN7010AJ Evaluation Board 批量生产VN7010AJTR 4.12 立即购买 EV-VN7016AJ VN7016AJ Evaluation Board NRNDVN7016AJTR 3.92 EV-VN7020AJ VN7020AJ evaluation board 批量生产VN7020AJTR 4.12 立即购买 EV-VN7040AJ VN7040AJ evaluation board 批量生产VN7040AJTR 4.12 立即购买 EV-VN7040AS VN7040AS Evaluation Board 批量生产VN7040ASTR 4.12 立即购买 EV-VN7050AJ VN7050AJ evaluation board 批量生产VN7050AJTR 3.92 EV-VN7050AS VN7050AS evaluation board 批量生产VN7050AS 4.12 立即购买 EV-VN7140AJ VN7140AJ evaluation board 批量生产VN7140AJTR 3.92 EV-VN7140AS VN7140AS Evaluation Board 批量生产VN7140ASTR 3.92 EV-VND7004AY VND7004AY Evaluation Board 批量生产VND7004AYTR 4.12 立即购买 EV-VND7020AJ VND7020AJ Evaluation Board 批量生产VND7020AJTR 3.92 EV-VND7030AJ VND7030AJ Evaluation Board 批量生产VND7030AJTR 4.12 立即购买 EV-VND7040AJ VND7040AJ Evaluation Board 批量生产VND7040AJTR 4.12 立即购买 EV-VND7050AJ VND7050AJ Evaluation Board 批量生产VND7050AJTR 3.92 EV-VND7140AJ VND7140AJ Evaluation Board 批量生产VND7140AJTR 3.92 EV-VNQ7040AY VNQ7040AY Evaluation Board 批量生产VNQ7040AY 3.92 EV-VNQ7050AJ VNQ7050AJ Evaluation Board 批量生产VNQ7050AJ 3.92 EV-VNQ7140AJ VNQ7140AJ Evaluation Board 批量生产VNQ7140AJTR 4.12 立即购买 STSW-SPC5EV-ADIS SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers 批量生产- 产品型号 供应商 下载 STSW-SPC5EV-ADIS ST EV-VN7003AH描述 :
VN7003AH Evaluation BoardPrice (US$)*
3.92EV-VN7003ALH描述 :
VN7003ALH Evaluation BoardPrice (US$)*
3.92EV-VN7007ALH描述 :
VN7007ALH Evaluation BoardPrice (US$)*
3.92EV-VN7016AJ描述 :
VN7016AJ Evaluation BoardPrice (US$)*
3.92EV-VN7050AJ描述 :
VN7050AJ evaluation boardPrice (US$)*
3.92EV-VN7140AJ描述 :
VN7140AJ evaluation boardPrice (US$)*
3.92EV-VN7140AS描述 :
VN7140AS Evaluation BoardPrice (US$)*
3.92EV-VND7020AJ描述 :
VND7020AJ Evaluation BoardPrice (US$)*
3.92EV-VND7050AJ描述 :
VND7050AJ Evaluation BoardPrice (US$)*
3.92EV-VND7140AJ描述 :
VND7140AJ Evaluation BoardPrice (US$)*
3.92EV-VNQ7040AY描述 :
VNQ7040AY Evaluation BoardPrice (US$)*
3.92EV-VNQ7050AJ描述 :
VNQ7050AJ Evaluation BoardPrice (US$)*
3.92STSW-SPC5EV-ADIS描述 :
SPC5-EV-ADIS Graphical User Interface for M0-7 High Side DriversPrice (US$)*
-产品型号 供应商 下载 STSW-SPC5EV-ADIS ST
-
-
-
Build your ST evaluation High Side Driver Automotive system: thanks to the ST's SPC5-EV-ADIS adapter you can combine the SPC560B-DIS Discovery board along with VIPower easy boards addressing several automotive applications such as front & rear car lighting, automotive resistive, inductive and capacitive loads, automotive smart power distribution, glow plug, heating systems, relay replacement and high power resistive and inductive actuators.
A broad range of Easy Boards EV-VNx7xxx from 3mΩ to 140mΩ are available on ST.COM. Please find here below a complete list where to select the best boards fitting your application.
Solution Components
产品型号 描述 状态 Core Products Price (US$)* Order / DownloadBuy AllSPC56B-Discovery 主要特性
- SPC560B54L5 32-bit 48 MHz e200z0h CPU, 32-bit Power Architecture® Technology CPU, 768 kB Code Flash in an LQFP144 package.
- On-board USB-JTAG PLS debugger and HW selection mode to use stand-alone JTAG debuggers.
- Board power supply: through external +12 V PSU or from the USB bus (5 V supply voltage).
- Seven LEDs: D6 for 5 V power on,D2 for Reset, D101, D102, D103 for PLS debugger section, D7 and D8 for PC3 and PC2 outputs
- Two push buttons (reset and user)
- A potentiometers for ADC input (user)
- Two extension headers (2 x 36 pin - 100 mil) for all LQFP144 pins and for quick connection to prototyping boards, additional modules and easy probing.
- JTAG interface (2 x 7 male 100mil connector)
- USB port (mini -B)
- 16 MHz crystal
- Specification:
- Board size 100 x 65 mm
- MCU: SPC560B54L5 - LQFP144
- 2 extension headers 2 x 36 pin - 100 mil
- DC connector (+12 V input)
- Mini USB - B
- JTAG 2 x 7 - 100 mil connector
Discovery Kit for SPC56 B line - with SPC560B54L5 MCU 批量生产85.75 立即购买 SPC5-EV-ADIS 主要特性
- Board size 100 x 55 mm
- Two extension headers (2 x 36 pin - 100 mil) for quick connection to SPC560B-DIS discovery board
- Extension headers for quick connection of M0-7 easy board
- Extension headers for quick connection of H-Bridge easy board
- Controllable by dedicated GUI for HSD or for H-Bridge available on www.st.com
- Free ready to run application firmware for HSD or for H-Bridge available on www.st.com, to support quick evaluation and development
Adapter board 批量生产32.12 立即购买 EV-VN7007AH VN7007AH Evaluation Board 批量生产VN7007AHTR 4.12 立即购买 STSW-SPC5EV-ADIS SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers 批量生产- 产品型号 供应商 下载 STSW-SPC5EV-ADIS ST STSW-SPC5EV-ADIS描述 :
SPC5-EV-ADIS Graphical User Interface for M0-7 High Side DriversPrice (US$)*
-产品型号 供应商 下载 STSW-SPC5EV-ADIS ST
-
-
-
Build your ST evaluation High Side Driver Automotive system: thanks to the ST's SPC5-EV-ADIS adapter you can combine the SPC560B-DIS Discovery board along with VIPower easy boards addressing several automotive applications such as front & rear car lighting, automotive resistive, inductive and capacitive loads, automotive smart power distribution, glow plug, heating systems, relay replacement and high power resistive and inductive actuators.
A broad range of Easy Boards EV-VNx7xxx from 3mΩ to 140mΩ are available on ST.COM. Please find here below a complete list where to select the best boards fitting your application.
Solution Components
产品型号 描述 状态 Core Products Price (US$)* Order / DownloadBuy AllSPC56B-Discovery 主要特性
- SPC560B54L5 32-bit 48 MHz e200z0h CPU, 32-bit Power Architecture® Technology CPU, 768 kB Code Flash in an LQFP144 package.
- On-board USB-JTAG PLS debugger and HW selection mode to use stand-alone JTAG debuggers.
- Board power supply: through external +12 V PSU or from the USB bus (5 V supply voltage).
- Seven LEDs: D6 for 5 V power on,D2 for Reset, D101, D102, D103 for PLS debugger section, D7 and D8 for PC3 and PC2 outputs
- Two push buttons (reset and user)
- A potentiometers for ADC input (user)
- Two extension headers (2 x 36 pin - 100 mil) for all LQFP144 pins and for quick connection to prototyping boards, additional modules and easy probing.
- JTAG interface (2 x 7 male 100mil connector)
- USB port (mini -B)
- 16 MHz crystal
- Specification:
- Board size 100 x 65 mm
- MCU: SPC560B54L5 - LQFP144
- 2 extension headers 2 x 36 pin - 100 mil
- DC connector (+12 V input)
- Mini USB - B
- JTAG 2 x 7 - 100 mil connector
Discovery Kit for SPC56 B line - with SPC560B54L5 MCU 批量生产85.75 立即购买 SPC5-EV-ADIS 主要特性
- Board size 100 x 55 mm
- Two extension headers (2 x 36 pin - 100 mil) for quick connection to SPC560B-DIS discovery board
- Extension headers for quick connection of M0-7 easy board
- Extension headers for quick connection of H-Bridge easy board
- Controllable by dedicated GUI for HSD or for H-Bridge available on www.st.com
- Free ready to run application firmware for HSD or for H-Bridge available on www.st.com, to support quick evaluation and development
Adapter board 批量生产32.12 立即购买 EV-VN7040AJ VN7040AJ evaluation board 批量生产VN7040AJTR 4.12 立即购买 STSW-SPC5EV-ADIS SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers 批量生产- 产品型号 供应商 下载 STSW-SPC5EV-ADIS ST STSW-SPC5EV-ADIS描述 :
SPC5-EV-ADIS Graphical User Interface for M0-7 High Side DriversPrice (US$)*
-产品型号 供应商 下载 STSW-SPC5EV-ADIS ST
-
-
-
Build your ST evaluation High Side Driver Automotive system: thanks to the ST's SPC5-EV-ADIS adapter you can combine the SPC560B-DIS Discovery board along with VIPower easy boards addressing several automotive applications such as front & rear car lighting, automotive resistive, inductive and capacitive loads, automotive smart power distribution, glow plug, heating systems, relay replacement and high power resistive and inductive actuators.
A broad range of Easy Boards EV-VNx7xxx from 3mΩ to 140mΩ are available on ST.COM. Please find here below a complete list where to select the best boards fitting your application.
Solution Components
产品型号 描述 状态 Core Products Price (US$)* Order / DownloadBuy AllSPC56B-Discovery 主要特性
- SPC560B54L5 32-bit 48 MHz e200z0h CPU, 32-bit Power Architecture® Technology CPU, 768 kB Code Flash in an LQFP144 package.
- On-board USB-JTAG PLS debugger and HW selection mode to use stand-alone JTAG debuggers.
- Board power supply: through external +12 V PSU or from the USB bus (5 V supply voltage).
- Seven LEDs: D6 for 5 V power on,D2 for Reset, D101, D102, D103 for PLS debugger section, D7 and D8 for PC3 and PC2 outputs
- Two push buttons (reset and user)
- A potentiometers for ADC input (user)
- Two extension headers (2 x 36 pin - 100 mil) for all LQFP144 pins and for quick connection to prototyping boards, additional modules and easy probing.
- JTAG interface (2 x 7 male 100mil connector)
- USB port (mini -B)
- 16 MHz crystal
- Specification:
- Board size 100 x 65 mm
- MCU: SPC560B54L5 - LQFP144
- 2 extension headers 2 x 36 pin - 100 mil
- DC connector (+12 V input)
- Mini USB - B
- JTAG 2 x 7 - 100 mil connector
Discovery Kit for SPC56 B line - with SPC560B54L5 MCU 批量生产85.75 立即购买 SPC5-EV-ADIS 主要特性
- Board size 100 x 55 mm
- Two extension headers (2 x 36 pin - 100 mil) for quick connection to SPC560B-DIS discovery board
- Extension headers for quick connection of M0-7 easy board
- Extension headers for quick connection of H-Bridge easy board
- Controllable by dedicated GUI for HSD or for H-Bridge available on www.st.com
- Free ready to run application firmware for HSD or for H-Bridge available on www.st.com, to support quick evaluation and development
Adapter board 批量生产32.12 立即购买 STSW-SPC5EV-ADIS SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers 批量生产- 产品型号 供应商 下载 STSW-SPC5EV-ADIS ST EV-VN7004CH VN7004CH Evaluation Board 批量生产VN7004CHTR 4.12 立即购买 STSW-SPC5EV-ADIS描述 :
SPC5-EV-ADIS Graphical User Interface for M0-7 High Side DriversPrice (US$)*
-产品型号 供应商 下载 STSW-SPC5EV-ADIS ST
-
-
-
Build your ST evaluation High Side Driver Automotive system: thanks to the ST's SPC5-EV-ADIS adapter you can combine the SPC560B-DIS Discovery board along with VIPower easy boards addressing several automotive applications such as front & rear car lighting, automotive resistive, inductive and capacitive loads, automotive smart power distribution, glow plug, heating systems, relay replacement and high power resistive and inductive actuators.
A broad range of Easy Boards EV-VNx7xxx from 3mΩ to 140mΩ are available on ST.COM. Please find here below a complete list where to select the best boards fitting your application.
Solution Components
产品型号 描述 状态 Core Products Price (US$)* Order / DownloadSPC56B-Discovery 主要特性
- SPC560B54L5 32-bit 48 MHz e200z0h CPU, 32-bit Power Architecture® Technology CPU, 768 kB Code Flash in an LQFP144 package.
- On-board USB-JTAG PLS debugger and HW selection mode to use stand-alone JTAG debuggers.
- Board power supply: through external +12 V PSU or from the USB bus (5 V supply voltage).
- Seven LEDs: D6 for 5 V power on,D2 for Reset, D101, D102, D103 for PLS debugger section, D7 and D8 for PC3 and PC2 outputs
- Two push buttons (reset and user)
- A potentiometers for ADC input (user)
- Two extension headers (2 x 36 pin - 100 mil) for all LQFP144 pins and for quick connection to prototyping boards, additional modules and easy probing.
- JTAG interface (2 x 7 male 100mil connector)
- USB port (mini -B)
- 16 MHz crystal
- Specification:
- Board size 100 x 65 mm
- MCU: SPC560B54L5 - LQFP144
- 2 extension headers 2 x 36 pin - 100 mil
- DC connector (+12 V input)
- Mini USB - B
- JTAG 2 x 7 - 100 mil connector
Discovery Kit for SPC56 B line - with SPC560B54L5 MCU 批量生产85.75 立即购买 SPC5-EV-ADIS 主要特性
- Board size 100 x 55 mm
- Two extension headers (2 x 36 pin - 100 mil) for quick connection to SPC560B-DIS discovery board
- Extension headers for quick connection of M0-7 easy board
- Extension headers for quick connection of H-Bridge easy board
- Controllable by dedicated GUI for HSD or for H-Bridge available on www.st.com
- Free ready to run application firmware for HSD or for H-Bridge available on www.st.com, to support quick evaluation and development
Adapter board 批量生产32.12 立即购买 STSW-SPC5EV-ADIS SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers 批量生产- 产品型号 供应商 下载 STSW-SPC5EV-ADIS ST EV-VN7003ALH VN7003ALH Evaluation Board 批量生产VN7003ALHTR 3.92 STSW-SPC5EV-ADIS描述 :
SPC5-EV-ADIS Graphical User Interface for M0-7 High Side DriversPrice (US$)*
-产品型号 供应商 下载 STSW-SPC5EV-ADIS ST EV-VN7003ALH描述 :
VN7003ALH Evaluation BoardPrice (US$)*
3.92
-
-
-
Build your ST evaluation High Side Driver Automotive system: thanks to the ST's SPC5-EV-ADIS adapter you can combine the SPC560B-DIS Discovery board along with VIPower easy boards addressing several automotive applications such as front & rear car lighting, automotive resistive, inductive and capacitive loads, automotive smart power distribution, glow plug, heating systems, relay replacement and high power resistive and inductive actuators.
A broad range of Easy Boards EV-VNx7xxx from 3mΩ to 140mΩ are available on ST.COM. Please find here below a complete list where to select the best boards fitting your application.
Solution Components
产品型号 描述 状态 Core Products Price (US$)* Order / DownloadBuy AllSPC56B-Discovery 主要特性
- SPC560B54L5 32-bit 48 MHz e200z0h CPU, 32-bit Power Architecture® Technology CPU, 768 kB Code Flash in an LQFP144 package.
- On-board USB-JTAG PLS debugger and HW selection mode to use stand-alone JTAG debuggers.
- Board power supply: through external +12 V PSU or from the USB bus (5 V supply voltage).
- Seven LEDs: D6 for 5 V power on,D2 for Reset, D101, D102, D103 for PLS debugger section, D7 and D8 for PC3 and PC2 outputs
- Two push buttons (reset and user)
- A potentiometers for ADC input (user)
- Two extension headers (2 x 36 pin - 100 mil) for all LQFP144 pins and for quick connection to prototyping boards, additional modules and easy probing.
- JTAG interface (2 x 7 male 100mil connector)
- USB port (mini -B)
- 16 MHz crystal
- Specification:
- Board size 100 x 65 mm
- MCU: SPC560B54L5 - LQFP144
- 2 extension headers 2 x 36 pin - 100 mil
- DC connector (+12 V input)
- Mini USB - B
- JTAG 2 x 7 - 100 mil connector
Discovery Kit for SPC56 B line - with SPC560B54L5 MCU 批量生产85.75 立即购买 SPC5-EV-ADIS 主要特性
- Board size 100 x 55 mm
- Two extension headers (2 x 36 pin - 100 mil) for quick connection to SPC560B-DIS discovery board
- Extension headers for quick connection of M0-7 easy board
- Extension headers for quick connection of H-Bridge easy board
- Controllable by dedicated GUI for HSD or for H-Bridge available on www.st.com
- Free ready to run application firmware for HSD or for H-Bridge available on www.st.com, to support quick evaluation and development
Adapter board 批量生产32.12 立即购买 EV-VN7004CLH VN7004CLH Evaluation Board 批量生产VN7004CLHTR 4.12 立即购买 STSW-SPC5EV-ADIS SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers 批量生产- 产品型号 供应商 下载 STSW-SPC5EV-ADIS ST STSW-SPC5EV-ADIS描述 :
SPC5-EV-ADIS Graphical User Interface for M0-7 High Side DriversPrice (US$)*
-产品型号 供应商 下载 STSW-SPC5EV-ADIS ST
-
-
-
Build your ST evaluation High Side Driver Automotive system: thanks to the ST's SPC5-EV-ADIS adapter you can combine the SPC560B-DIS Discovery board along with VIPower easy boards addressing several automotive applications such as front & rear car lighting, automotive resistive, inductive and capacitive loads, automotive smart power distribution, glow plug, heating systems, relay replacement and high power resistive and inductive actuators.
A broad range of Easy Boards EV-VNx7xxx from 3mΩ to 140mΩ are available on ST.COM. Please find here below a complete list where to select the best boards fitting your application.
Solution Components
产品型号 描述 状态 Core Products Price (US$)* Order / DownloadSPC56B-Discovery 主要特性
- SPC560B54L5 32-bit 48 MHz e200z0h CPU, 32-bit Power Architecture® Technology CPU, 768 kB Code Flash in an LQFP144 package.
- On-board USB-JTAG PLS debugger and HW selection mode to use stand-alone JTAG debuggers.
- Board power supply: through external +12 V PSU or from the USB bus (5 V supply voltage).
- Seven LEDs: D6 for 5 V power on,D2 for Reset, D101, D102, D103 for PLS debugger section, D7 and D8 for PC3 and PC2 outputs
- Two push buttons (reset and user)
- A potentiometers for ADC input (user)
- Two extension headers (2 x 36 pin - 100 mil) for all LQFP144 pins and for quick connection to prototyping boards, additional modules and easy probing.
- JTAG interface (2 x 7 male 100mil connector)
- USB port (mini -B)
- 16 MHz crystal
- Specification:
- Board size 100 x 65 mm
- MCU: SPC560B54L5 - LQFP144
- 2 extension headers 2 x 36 pin - 100 mil
- DC connector (+12 V input)
- Mini USB - B
- JTAG 2 x 7 - 100 mil connector
Discovery Kit for SPC56 B line - with SPC560B54L5 MCU 批量生产85.75 立即购买 SPC5-EV-ADIS 主要特性
- Board size 100 x 55 mm
- Two extension headers (2 x 36 pin - 100 mil) for quick connection to SPC560B-DIS discovery board
- Extension headers for quick connection of M0-7 easy board
- Extension headers for quick connection of H-Bridge easy board
- Controllable by dedicated GUI for HSD or for H-Bridge available on www.st.com
- Free ready to run application firmware for HSD or for H-Bridge available on www.st.com, to support quick evaluation and development
Adapter board 批量生产32.12 立即购买 EV-VN7007ALH VN7007ALH Evaluation Board 批量生产VN7007ALHTR 3.92 STSW-SPC5EV-ADIS SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers 批量生产- 产品型号 供应商 下载 STSW-SPC5EV-ADIS ST EV-VN7007ALH描述 :
VN7007ALH Evaluation BoardPrice (US$)*
3.92STSW-SPC5EV-ADIS描述 :
SPC5-EV-ADIS Graphical User Interface for M0-7 High Side DriversPrice (US$)*
-产品型号 供应商 下载 STSW-SPC5EV-ADIS ST
-
-
-
Build your ST evaluation High Side Driver Automotive system: thanks to the ST's SPC5-EV-ADIS adapter you can combine the SPC560B-DIS Discovery board along with VIPower easy boards addressing several automotive applications such as front & rear car lighting, automotive resistive, inductive and capacitive loads, automotive smart power distribution, glow plug, heating systems, relay replacement and high power resistive and inductive actuators.
A broad range of Easy Boards EV-VNx7xxx from 3mΩ to 140mΩ are available on ST.COM. Please find here below a complete list where to select the best boards fitting your application.
Solution Components
产品型号 描述 状态 Core Products Price (US$)* Order / DownloadBuy AllSPC56B-Discovery 主要特性
- SPC560B54L5 32-bit 48 MHz e200z0h CPU, 32-bit Power Architecture® Technology CPU, 768 kB Code Flash in an LQFP144 package.
- On-board USB-JTAG PLS debugger and HW selection mode to use stand-alone JTAG debuggers.
- Board power supply: through external +12 V PSU or from the USB bus (5 V supply voltage).
- Seven LEDs: D6 for 5 V power on,D2 for Reset, D101, D102, D103 for PLS debugger section, D7 and D8 for PC3 and PC2 outputs
- Two push buttons (reset and user)
- A potentiometers for ADC input (user)
- Two extension headers (2 x 36 pin - 100 mil) for all LQFP144 pins and for quick connection to prototyping boards, additional modules and easy probing.
- JTAG interface (2 x 7 male 100mil connector)
- USB port (mini -B)
- 16 MHz crystal
- Specification:
- Board size 100 x 65 mm
- MCU: SPC560B54L5 - LQFP144
- 2 extension headers 2 x 36 pin - 100 mil
- DC connector (+12 V input)
- Mini USB - B
- JTAG 2 x 7 - 100 mil connector
Discovery Kit for SPC56 B line - with SPC560B54L5 MCU 批量生产85.75 立即购买 SPC5-EV-ADIS 主要特性
- Board size 100 x 55 mm
- Two extension headers (2 x 36 pin - 100 mil) for quick connection to SPC560B-DIS discovery board
- Extension headers for quick connection of M0-7 easy board
- Extension headers for quick connection of H-Bridge easy board
- Controllable by dedicated GUI for HSD or for H-Bridge available on www.st.com
- Free ready to run application firmware for HSD or for H-Bridge available on www.st.com, to support quick evaluation and development
Adapter board 批量生产32.12 立即购买 EV-VN7020AJ VN7020AJ evaluation board 批量生产VN7020AJTR 4.12 立即购买 STSW-SPC5EV-ADIS SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers 批量生产- 产品型号 供应商 下载 STSW-SPC5EV-ADIS ST STSW-SPC5EV-ADIS描述 :
SPC5-EV-ADIS Graphical User Interface for M0-7 High Side DriversPrice (US$)*
-产品型号 供应商 下载 STSW-SPC5EV-ADIS ST
-
-
-
Build your ST evaluation High Side Driver Automotive system: thanks to the ST's SPC5-EV-ADIS adapter you can combine the SPC560B-DIS Discovery board along with VIPower easy boards addressing several automotive applications such as front & rear car lighting, automotive resistive, inductive and capacitive loads, automotive smart power distribution, glow plug, heating systems, relay replacement and high power resistive and inductive actuators.
A broad range of Easy Boards EV-VNx7xxx from 3mΩ to 140mΩ are available on ST.COM. Please find here below a complete list where to select the best boards fitting your application.
Solution Components
产品型号 描述 状态 Core Products Price (US$)* Order / DownloadSPC56B-Discovery 主要特性
- SPC560B54L5 32-bit 48 MHz e200z0h CPU, 32-bit Power Architecture® Technology CPU, 768 kB Code Flash in an LQFP144 package.
- On-board USB-JTAG PLS debugger and HW selection mode to use stand-alone JTAG debuggers.
- Board power supply: through external +12 V PSU or from the USB bus (5 V supply voltage).
- Seven LEDs: D6 for 5 V power on,D2 for Reset, D101, D102, D103 for PLS debugger section, D7 and D8 for PC3 and PC2 outputs
- Two push buttons (reset and user)
- A potentiometers for ADC input (user)
- Two extension headers (2 x 36 pin - 100 mil) for all LQFP144 pins and for quick connection to prototyping boards, additional modules and easy probing.
- JTAG interface (2 x 7 male 100mil connector)
- USB port (mini -B)
- 16 MHz crystal
- Specification:
- Board size 100 x 65 mm
- MCU: SPC560B54L5 - LQFP144
- 2 extension headers 2 x 36 pin - 100 mil
- DC connector (+12 V input)
- Mini USB - B
- JTAG 2 x 7 - 100 mil connector
Discovery Kit for SPC56 B line - with SPC560B54L5 MCU 批量生产85.75 立即购买 SPC5-EV-ADIS 主要特性
- Board size 100 x 55 mm
- Two extension headers (2 x 36 pin - 100 mil) for quick connection to SPC560B-DIS discovery board
- Extension headers for quick connection of M0-7 easy board
- Extension headers for quick connection of H-Bridge easy board
- Controllable by dedicated GUI for HSD or for H-Bridge available on www.st.com
- Free ready to run application firmware for HSD or for H-Bridge available on www.st.com, to support quick evaluation and development
Adapter board 批量生产32.12 立即购买 EV-VN7140AJ VN7140AJ evaluation board 批量生产VN7140AJTR 3.92 STSW-SPC5EV-ADIS SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers 批量生产- 产品型号 供应商 下载 STSW-SPC5EV-ADIS ST EV-VN7140AJ描述 :
VN7140AJ evaluation boardPrice (US$)*
3.92STSW-SPC5EV-ADIS描述 :
SPC5-EV-ADIS Graphical User Interface for M0-7 High Side DriversPrice (US$)*
-产品型号 供应商 下载 STSW-SPC5EV-ADIS ST
-
-
-
Build your ST evaluation High Side Driver Automotive system: thanks to the ST's SPC5-EV-ADIS adapter you can combine the SPC560B-DIS Discovery board along with VIPower easy boards addressing several automotive applications such as front & rear car lighting, automotive resistive, inductive and capacitive loads, automotive smart power distribution, glow plug, heating systems, relay replacement and high power resistive and inductive actuators.
A broad range of Easy Boards EV-VNx7xxx from 3mΩ to 140mΩ are available on ST.COM. Please find here below a complete list where to select the best boards fitting your application.
Solution Components
产品型号 描述 状态 Core Products Price (US$)* Order / DownloadSPC56B-Discovery 主要特性
- SPC560B54L5 32-bit 48 MHz e200z0h CPU, 32-bit Power Architecture® Technology CPU, 768 kB Code Flash in an LQFP144 package.
- On-board USB-JTAG PLS debugger and HW selection mode to use stand-alone JTAG debuggers.
- Board power supply: through external +12 V PSU or from the USB bus (5 V supply voltage).
- Seven LEDs: D6 for 5 V power on,D2 for Reset, D101, D102, D103 for PLS debugger section, D7 and D8 for PC3 and PC2 outputs
- Two push buttons (reset and user)
- A potentiometers for ADC input (user)
- Two extension headers (2 x 36 pin - 100 mil) for all LQFP144 pins and for quick connection to prototyping boards, additional modules and easy probing.
- JTAG interface (2 x 7 male 100mil connector)
- USB port (mini -B)
- 16 MHz crystal
- Specification:
- Board size 100 x 65 mm
- MCU: SPC560B54L5 - LQFP144
- 2 extension headers 2 x 36 pin - 100 mil
- DC connector (+12 V input)
- Mini USB - B
- JTAG 2 x 7 - 100 mil connector
Discovery Kit for SPC56 B line - with SPC560B54L5 MCU 批量生产85.75 立即购买 SPC5-EV-ADIS 主要特性
- Board size 100 x 55 mm
- Two extension headers (2 x 36 pin - 100 mil) for quick connection to SPC560B-DIS discovery board
- Extension headers for quick connection of M0-7 easy board
- Extension headers for quick connection of H-Bridge easy board
- Controllable by dedicated GUI for HSD or for H-Bridge available on www.st.com
- Free ready to run application firmware for HSD or for H-Bridge available on www.st.com, to support quick evaluation and development
Adapter board 批量生产32.12 立即购买 EV-VN7016AJ VN7016AJ Evaluation Board NRNDVN7016AJTR 3.92 STSW-SPC5EV-ADIS SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers 批量生产- 产品型号 供应商 下载 STSW-SPC5EV-ADIS ST EV-VN7016AJ描述 :
VN7016AJ Evaluation BoardPrice (US$)*
3.92STSW-SPC5EV-ADIS描述 :
SPC5-EV-ADIS Graphical User Interface for M0-7 High Side DriversPrice (US$)*
-产品型号 供应商 下载 STSW-SPC5EV-ADIS ST
-
-
-
Combining the VIP-M07-ADIS (12V expansion board based on 1x VND7020AJ + 2x VND7012AY + 1xVNQ7050AJ) with the SPC560B-DIS Discovery board, the user can evaluate how to drive a complete car front lighting system by using M0-7 VIPower devices.
VND7020AJ, VND7012AY and VNQ7050AJ are designed to drive 12V automotive grounded loads through a 3V and 5V CMOS-compatible interface, providing advanced protection and diagnostics.
Solution Components
产品型号 描述 状态 Core Products Price (US$)* Order / DownloadBuy AllVIP-M07-ADIS 主要特性
- 4 soldered M0-7 high side drivers:
- 1 VND7020AJ
- 2 VND7012AY
- 1 VNQ7050AJ
- Board size 100 x 55 mm
- Two extension headers (2 x 36 pin - 100 mil) for quick connection to SPC560B-DIS discovery board
- Controllable by dedicated GUI for HSD or for H-Bridge available on www.st.com
- Free ready to run application firmware availabe on www.st.com, to support quick evaluation and development
M0-7 DISCOVERY 批量生产51.09 立即购买 SPC56B-Discovery 主要特性
- SPC560B54L5 32-bit 48 MHz e200z0h CPU, 32-bit Power Architecture® Technology CPU, 768 kB Code Flash in an LQFP144 package.
- On-board USB-JTAG PLS debugger and HW selection mode to use stand-alone JTAG debuggers.
- Board power supply: through external +12 V PSU or from the USB bus (5 V supply voltage).
- Seven LEDs: D6 for 5 V power on,D2 for Reset, D101, D102, D103 for PLS debugger section, D7 and D8 for PC3 and PC2 outputs
- Two push buttons (reset and user)
- A potentiometers for ADC input (user)
- Two extension headers (2 x 36 pin - 100 mil) for all LQFP144 pins and for quick connection to prototyping boards, additional modules and easy probing.
- JTAG interface (2 x 7 male 100mil connector)
- USB port (mini -B)
- 16 MHz crystal
- Specification:
- Board size 100 x 65 mm
- MCU: SPC560B54L5 - LQFP144
- 2 extension headers 2 x 36 pin - 100 mil
- DC connector (+12 V input)
- Mini USB - B
- JTAG 2 x 7 - 100 mil connector
Discovery Kit for SPC56 B line - with SPC560B54L5 MCU 批量生产85.75 立即购买 STSW-M07-ADIS VIP-M07-ADIS Graphical User Interface 批量生产- 产品型号 供应商 下载 STSW-M07-ADIS ST STSW-M07-ADIS描述 :
VIP-M07-ADIS Graphical User InterfacePrice (US$)*
-产品型号 供应商 下载 STSW-M07-ADIS ST - 4 soldered M0-7 high side drivers:
-
-
-
Build your ST evaluation High Side Driver Automotive system: thanks to the ST's SPC5-EV-ADIS adapter you can combine the SPC560B-DIS Discovery board along with VIPower easy boards addressing several automotive applications such as front & rear car lighting, automotive resistive, inductive and capacitive loads, automotive smart power distribution, glow plug, heating systems, relay replacement and high power resistive and inductive actuators.
A broad range of Easy Boards EV-VNx7xxx from 3mΩ to 140mΩ are available on ST.COM. Please find here below a complete list where to select the best boards fitting your application.
Solution Components
产品型号 描述 状态 Core Products Price (US$)* Order / DownloadBuy AllSPC56B-Discovery 主要特性
- SPC560B54L5 32-bit 48 MHz e200z0h CPU, 32-bit Power Architecture® Technology CPU, 768 kB Code Flash in an LQFP144 package.
- On-board USB-JTAG PLS debugger and HW selection mode to use stand-alone JTAG debuggers.
- Board power supply: through external +12 V PSU or from the USB bus (5 V supply voltage).
- Seven LEDs: D6 for 5 V power on,D2 for Reset, D101, D102, D103 for PLS debugger section, D7 and D8 for PC3 and PC2 outputs
- Two push buttons (reset and user)
- A potentiometers for ADC input (user)
- Two extension headers (2 x 36 pin - 100 mil) for all LQFP144 pins and for quick connection to prototyping boards, additional modules and easy probing.
- JTAG interface (2 x 7 male 100mil connector)
- USB port (mini -B)
- 16 MHz crystal
- Specification:
- Board size 100 x 65 mm
- MCU: SPC560B54L5 - LQFP144
- 2 extension headers 2 x 36 pin - 100 mil
- DC connector (+12 V input)
- Mini USB - B
- JTAG 2 x 7 - 100 mil connector
Discovery Kit for SPC56 B line - with SPC560B54L5 MCU 批量生产85.75 立即购买 SPC5-EV-ADIS 主要特性
- Board size 100 x 55 mm
- Two extension headers (2 x 36 pin - 100 mil) for quick connection to SPC560B-DIS discovery board
- Extension headers for quick connection of M0-7 easy board
- Extension headers for quick connection of H-Bridge easy board
- Controllable by dedicated GUI for HSD or for H-Bridge available on www.st.com
- Free ready to run application firmware for HSD or for H-Bridge available on www.st.com, to support quick evaluation and development
Adapter board 批量生产32.12 立即购买 EV-VN7010AJ VN7010AJ Evaluation Board 批量生产VN7010AJTR 4.12 立即购买 STSW-SPC5EV-ADIS SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers 批量生产- 产品型号 供应商 下载 STSW-SPC5EV-ADIS ST STSW-SPC5EV-ADIS描述 :
SPC5-EV-ADIS Graphical User Interface for M0-7 High Side DriversPrice (US$)*
-产品型号 供应商 下载 STSW-SPC5EV-ADIS ST
-
-
-
Build your ST evaluation High Side Driver Automotive system: thanks to the ST's SPC5-EV-ADIS adapter you can combine the SPC560B-DIS Discovery board along with VIPower easy boards addressing several automotive applications such as front & rear car lighting, automotive resistive, inductive and capacitive loads, automotive smart power distribution, glow plug, heating systems, relay replacement and high power resistive and inductive actuators.
A broad range of Easy Boards EV-VNx7xxx from 3mΩ to 140mΩ are available on ST.COM. Please find here below a complete list where to select the best boards fitting your application.
Solution Components
产品型号 描述 状态 Core Products Price (US$)* Order / DownloadSPC56B-Discovery 主要特性
- SPC560B54L5 32-bit 48 MHz e200z0h CPU, 32-bit Power Architecture® Technology CPU, 768 kB Code Flash in an LQFP144 package.
- On-board USB-JTAG PLS debugger and HW selection mode to use stand-alone JTAG debuggers.
- Board power supply: through external +12 V PSU or from the USB bus (5 V supply voltage).
- Seven LEDs: D6 for 5 V power on,D2 for Reset, D101, D102, D103 for PLS debugger section, D7 and D8 for PC3 and PC2 outputs
- Two push buttons (reset and user)
- A potentiometers for ADC input (user)
- Two extension headers (2 x 36 pin - 100 mil) for all LQFP144 pins and for quick connection to prototyping boards, additional modules and easy probing.
- JTAG interface (2 x 7 male 100mil connector)
- USB port (mini -B)
- 16 MHz crystal
- Specification:
- Board size 100 x 65 mm
- MCU: SPC560B54L5 - LQFP144
- 2 extension headers 2 x 36 pin - 100 mil
- DC connector (+12 V input)
- Mini USB - B
- JTAG 2 x 7 - 100 mil connector
Discovery Kit for SPC56 B line - with SPC560B54L5 MCU 批量生产85.75 立即购买 SPC5-EV-ADIS 主要特性
- Board size 100 x 55 mm
- Two extension headers (2 x 36 pin - 100 mil) for quick connection to SPC560B-DIS discovery board
- Extension headers for quick connection of M0-7 easy board
- Extension headers for quick connection of H-Bridge easy board
- Controllable by dedicated GUI for HSD or for H-Bridge available on www.st.com
- Free ready to run application firmware for HSD or for H-Bridge available on www.st.com, to support quick evaluation and development
Adapter board 批量生产32.12 立即购买 EV-VN7003AH VN7003AH Evaluation Board 批量生产VN7003AHTR 3.92 STSW-SPC5EV-ADIS SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers 批量生产- 产品型号 供应商 下载 STSW-SPC5EV-ADIS ST EV-VN7003AH描述 :
VN7003AH Evaluation BoardPrice (US$)*
3.92STSW-SPC5EV-ADIS描述 :
SPC5-EV-ADIS Graphical User Interface for M0-7 High Side DriversPrice (US$)*
-产品型号 供应商 下载 STSW-SPC5EV-ADIS ST
-
-
-
Build your ST evaluation High Side Driver Automotive system: thanks to the ST's SPC5-EV-ADIS adapter you can combine the SPC560B-DIS Discovery board along with VIPower easy boards addressing several automotive applications such as front & rear car lighting, automotive resistive, inductive and capacitive loads, automotive smart power distribution, glow plug, heating systems, relay replacement and high power resistive and inductive actuators.
A broad range of Easy Boards EV-VNx7xxx from 3mΩ to 140mΩ are available on ST.COM. Please find here below a complete list where to select the best boards fitting your application.
Solution Components
产品型号 描述 状态 Core Products Price (US$)* Order / DownloadBuy AllSPC56B-Discovery 主要特性
- SPC560B54L5 32-bit 48 MHz e200z0h CPU, 32-bit Power Architecture® Technology CPU, 768 kB Code Flash in an LQFP144 package.
- On-board USB-JTAG PLS debugger and HW selection mode to use stand-alone JTAG debuggers.
- Board power supply: through external +12 V PSU or from the USB bus (5 V supply voltage).
- Seven LEDs: D6 for 5 V power on,D2 for Reset, D101, D102, D103 for PLS debugger section, D7 and D8 for PC3 and PC2 outputs
- Two push buttons (reset and user)
- A potentiometers for ADC input (user)
- Two extension headers (2 x 36 pin - 100 mil) for all LQFP144 pins and for quick connection to prototyping boards, additional modules and easy probing.
- JTAG interface (2 x 7 male 100mil connector)
- USB port (mini -B)
- 16 MHz crystal
- Specification:
- Board size 100 x 65 mm
- MCU: SPC560B54L5 - LQFP144
- 2 extension headers 2 x 36 pin - 100 mil
- DC connector (+12 V input)
- Mini USB - B
- JTAG 2 x 7 - 100 mil connector
Discovery Kit for SPC56 B line - with SPC560B54L5 MCU 批量生产85.75 立即购买 SPC5-EV-ADIS 主要特性
- Board size 100 x 55 mm
- Two extension headers (2 x 36 pin - 100 mil) for quick connection to SPC560B-DIS discovery board
- Extension headers for quick connection of M0-7 easy board
- Extension headers for quick connection of H-Bridge easy board
- Controllable by dedicated GUI for HSD or for H-Bridge available on www.st.com
- Free ready to run application firmware for HSD or for H-Bridge available on www.st.com, to support quick evaluation and development
Adapter board 批量生产32.12 立即购买 EV-VN7040AS VN7040AS Evaluation Board 批量生产VN7040ASTR 4.12 立即购买 STSW-SPC5EV-ADIS SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers 批量生产- 产品型号 供应商 下载 STSW-SPC5EV-ADIS ST STSW-SPC5EV-ADIS描述 :
SPC5-EV-ADIS Graphical User Interface for M0-7 High Side DriversPrice (US$)*
-产品型号 供应商 下载 STSW-SPC5EV-ADIS ST
-
-
-
Build your ST evaluation High Side Driver Automotive system: thanks to the ST's SPC5-EV-ADIS adapter you can combine the SPC560B-DIS Discovery board along with VIPower easy boards addressing several automotive applications such as front & rear car lighting, automotive resistive, inductive and capacitive loads, automotive smart power distribution, glow plug, heating systems, relay replacement and high power resistive and inductive actuators.
A broad range of Easy Boards EV-VNx7xxx from 3mΩ to 140mΩ are available on ST.COM. Please find here below a complete list where to select the best boards fitting your application.
Solution Components
产品型号 描述 状态 Core Products Price (US$)* Order / DownloadSPC56B-Discovery 主要特性
- SPC560B54L5 32-bit 48 MHz e200z0h CPU, 32-bit Power Architecture® Technology CPU, 768 kB Code Flash in an LQFP144 package.
- On-board USB-JTAG PLS debugger and HW selection mode to use stand-alone JTAG debuggers.
- Board power supply: through external +12 V PSU or from the USB bus (5 V supply voltage).
- Seven LEDs: D6 for 5 V power on,D2 for Reset, D101, D102, D103 for PLS debugger section, D7 and D8 for PC3 and PC2 outputs
- Two push buttons (reset and user)
- A potentiometers for ADC input (user)
- Two extension headers (2 x 36 pin - 100 mil) for all LQFP144 pins and for quick connection to prototyping boards, additional modules and easy probing.
- JTAG interface (2 x 7 male 100mil connector)
- USB port (mini -B)
- 16 MHz crystal
- Specification:
- Board size 100 x 65 mm
- MCU: SPC560B54L5 - LQFP144
- 2 extension headers 2 x 36 pin - 100 mil
- DC connector (+12 V input)
- Mini USB - B
- JTAG 2 x 7 - 100 mil connector
Discovery Kit for SPC56 B line - with SPC560B54L5 MCU 批量生产85.75 立即购买 SPC5-EV-ADIS 主要特性
- Board size 100 x 55 mm
- Two extension headers (2 x 36 pin - 100 mil) for quick connection to SPC560B-DIS discovery board
- Extension headers for quick connection of M0-7 easy board
- Extension headers for quick connection of H-Bridge easy board
- Controllable by dedicated GUI for HSD or for H-Bridge available on www.st.com
- Free ready to run application firmware for HSD or for H-Bridge available on www.st.com, to support quick evaluation and development
Adapter board 批量生产32.12 立即购买 EV-VN7050AJ VN7050AJ evaluation board 批量生产VN7050AJTR 3.92 STSW-SPC5EV-ADIS SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers 批量生产- 产品型号 供应商 下载 STSW-SPC5EV-ADIS ST EV-VN7050AJ描述 :
VN7050AJ evaluation boardPrice (US$)*
3.92STSW-SPC5EV-ADIS描述 :
SPC5-EV-ADIS Graphical User Interface for M0-7 High Side DriversPrice (US$)*
-产品型号 供应商 下载 STSW-SPC5EV-ADIS ST
-
-
-
Build your ST evaluation High Side Driver Automotive system: thanks to the ST's SPC5-EV-ADIS adapter you can combine the SPC560B-DIS Discovery board along with VIPower easy boards addressing several automotive applications such as front & rear car lighting, automotive resistive, inductive and capacitive loads, automotive smart power distribution, glow plug, heating systems, relay replacement and high power resistive and inductive actuators.
A broad range of Easy Boards EV-VNx7xxx from 3mΩ to 140mΩ are available on ST.COM. Please find here below a complete list where to select the best boards fitting your application.
Solution Components
产品型号 描述 状态 Core Products Price (US$)* Order / DownloadBuy AllSPC56B-Discovery 主要特性
- SPC560B54L5 32-bit 48 MHz e200z0h CPU, 32-bit Power Architecture® Technology CPU, 768 kB Code Flash in an LQFP144 package.
- On-board USB-JTAG PLS debugger and HW selection mode to use stand-alone JTAG debuggers.
- Board power supply: through external +12 V PSU or from the USB bus (5 V supply voltage).
- Seven LEDs: D6 for 5 V power on,D2 for Reset, D101, D102, D103 for PLS debugger section, D7 and D8 for PC3 and PC2 outputs
- Two push buttons (reset and user)
- A potentiometers for ADC input (user)
- Two extension headers (2 x 36 pin - 100 mil) for all LQFP144 pins and for quick connection to prototyping boards, additional modules and easy probing.
- JTAG interface (2 x 7 male 100mil connector)
- USB port (mini -B)
- 16 MHz crystal
- Specification:
- Board size 100 x 65 mm
- MCU: SPC560B54L5 - LQFP144
- 2 extension headers 2 x 36 pin - 100 mil
- DC connector (+12 V input)
- Mini USB - B
- JTAG 2 x 7 - 100 mil connector
Discovery Kit for SPC56 B line - with SPC560B54L5 MCU 批量生产85.75 立即购买 SPC5-EV-ADIS 主要特性
- Board size 100 x 55 mm
- Two extension headers (2 x 36 pin - 100 mil) for quick connection to SPC560B-DIS discovery board
- Extension headers for quick connection of M0-7 easy board
- Extension headers for quick connection of H-Bridge easy board
- Controllable by dedicated GUI for HSD or for H-Bridge available on www.st.com
- Free ready to run application firmware for HSD or for H-Bridge available on www.st.com, to support quick evaluation and development
Adapter board 批量生产32.12 立即购买 EV-VN7050AS VN7050AS evaluation board 批量生产VN7050AS 4.12 立即购买 STSW-SPC5EV-ADIS SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers 批量生产- 产品型号 供应商 下载 STSW-SPC5EV-ADIS ST STSW-SPC5EV-ADIS描述 :
SPC5-EV-ADIS Graphical User Interface for M0-7 High Side DriversPrice (US$)*
-产品型号 供应商 下载 STSW-SPC5EV-ADIS ST
-
-
-
Build your ST evaluation High Side Driver Automotive system: thanks to the ST's SPC5-EV-ADIS adapter you can combine the SPC560B-DIS Discovery board along with VIPower easy boards addressing several automotive applications such as front & rear car lighting, automotive resistive, inductive and capacitive loads, automotive smart power distribution, glow plug, heating systems, relay replacement and high power resistive and inductive actuators.
A broad range of Easy Boards EV-VNx7xxx from 3mΩ to 140mΩ are available on ST.COM. Please find here below a complete list where to select the best boards fitting your application.
Solution Components
产品型号 描述 状态 Core Products Price (US$)* Order / DownloadSPC56B-Discovery 主要特性
- SPC560B54L5 32-bit 48 MHz e200z0h CPU, 32-bit Power Architecture® Technology CPU, 768 kB Code Flash in an LQFP144 package.
- On-board USB-JTAG PLS debugger and HW selection mode to use stand-alone JTAG debuggers.
- Board power supply: through external +12 V PSU or from the USB bus (5 V supply voltage).
- Seven LEDs: D6 for 5 V power on,D2 for Reset, D101, D102, D103 for PLS debugger section, D7 and D8 for PC3 and PC2 outputs
- Two push buttons (reset and user)
- A potentiometers for ADC input (user)
- Two extension headers (2 x 36 pin - 100 mil) for all LQFP144 pins and for quick connection to prototyping boards, additional modules and easy probing.
- JTAG interface (2 x 7 male 100mil connector)
- USB port (mini -B)
- 16 MHz crystal
- Specification:
- Board size 100 x 65 mm
- MCU: SPC560B54L5 - LQFP144
- 2 extension headers 2 x 36 pin - 100 mil
- DC connector (+12 V input)
- Mini USB - B
- JTAG 2 x 7 - 100 mil connector
Discovery Kit for SPC56 B line - with SPC560B54L5 MCU 批量生产85.75 立即购买 SPC5-EV-ADIS 主要特性
- Board size 100 x 55 mm
- Two extension headers (2 x 36 pin - 100 mil) for quick connection to SPC560B-DIS discovery board
- Extension headers for quick connection of M0-7 easy board
- Extension headers for quick connection of H-Bridge easy board
- Controllable by dedicated GUI for HSD or for H-Bridge available on www.st.com
- Free ready to run application firmware for HSD or for H-Bridge available on www.st.com, to support quick evaluation and development
Adapter board 批量生产32.12 立即购买 EV-VN7140AS VN7140AS Evaluation Board 批量生产VN7140ASTR 3.92 STSW-SPC5EV-ADIS SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers 批量生产- 产品型号 供应商 下载 STSW-SPC5EV-ADIS ST EV-VN7140AS描述 :
VN7140AS Evaluation BoardPrice (US$)*
3.92STSW-SPC5EV-ADIS描述 :
SPC5-EV-ADIS Graphical User Interface for M0-7 High Side DriversPrice (US$)*
-产品型号 供应商 下载 STSW-SPC5EV-ADIS ST
-
-
-
Build your ST evaluation High Side Driver Automotive system: thanks to the ST's SPC5-EV-ADIS adapter you can combine the SPC560B-DIS Discovery board along with VIPower easy boards addressing several automotive applications such as front & rear car lighting, automotive resistive, inductive and capacitive loads, automotive smart power distribution, glow plug, heating systems, relay replacement and high power resistive and inductive actuators.
A broad range of Easy Boards EV-VNx7xxx from 3mΩ to 140mΩ are available on ST.COM. Please find here below a complete list where to select the best boards fitting your application.
Solution Components
产品型号 描述 状态 Core Products Price (US$)* Order / DownloadBuy AllSPC56B-Discovery 主要特性
- SPC560B54L5 32-bit 48 MHz e200z0h CPU, 32-bit Power Architecture® Technology CPU, 768 kB Code Flash in an LQFP144 package.
- On-board USB-JTAG PLS debugger and HW selection mode to use stand-alone JTAG debuggers.
- Board power supply: through external +12 V PSU or from the USB bus (5 V supply voltage).
- Seven LEDs: D6 for 5 V power on,D2 for Reset, D101, D102, D103 for PLS debugger section, D7 and D8 for PC3 and PC2 outputs
- Two push buttons (reset and user)
- A potentiometers for ADC input (user)
- Two extension headers (2 x 36 pin - 100 mil) for all LQFP144 pins and for quick connection to prototyping boards, additional modules and easy probing.
- JTAG interface (2 x 7 male 100mil connector)
- USB port (mini -B)
- 16 MHz crystal
- Specification:
- Board size 100 x 65 mm
- MCU: SPC560B54L5 - LQFP144
- 2 extension headers 2 x 36 pin - 100 mil
- DC connector (+12 V input)
- Mini USB - B
- JTAG 2 x 7 - 100 mil connector
Discovery Kit for SPC56 B line - with SPC560B54L5 MCU 批量生产85.75 立即购买 SPC5-EV-ADIS 主要特性
- Board size 100 x 55 mm
- Two extension headers (2 x 36 pin - 100 mil) for quick connection to SPC560B-DIS discovery board
- Extension headers for quick connection of M0-7 easy board
- Extension headers for quick connection of H-Bridge easy board
- Controllable by dedicated GUI for HSD or for H-Bridge available on www.st.com
- Free ready to run application firmware for HSD or for H-Bridge available on www.st.com, to support quick evaluation and development
Adapter board 批量生产32.12 立即购买 STSW-SPC5EV-ADIS SPC5-EV-ADIS Graphical User Interface for M0-7 High Side Drivers 批量生产- 产品型号 供应商 下载 STSW-SPC5EV-ADIS ST STSW-SPC5EV-ADIS描述 :
SPC5-EV-ADIS Graphical User Interface for M0-7 High Side DriversPrice (US$)*
-产品型号 供应商 下载 STSW-SPC5EV-ADIS ST
-
-
-
Build your ST evaluation High Side Driver Automotive system: thanks to the ST's SPC5-EV-ADIS adapter you can combine the SPC560B-DIS Discovery board along with VIPower easy boards addressing several automotive applications such as front & rear car lighting, automotive resistive, inductive and capacitive loads, automotive smart power distribution, glow plug, heating systems, relay replacement and high power resistive and inductive actuators.
A broad range of Easy Boards EV-VNx7xxx from 3mΩ to 140mΩ are available on ST.COM. Please find here below a complete list where to select the best boards fitting your application.
Solution Components
产品型号 描述 状态 Core Products Price (US$)* Order / DownloadSPC56B-Discovery 主要特性
- SPC560B54L5 32-bit 48 MHz e200z0h CPU, 32-bit Power Architecture® Technology CPU, 768 kB Code Flash in an LQFP144 package.
- On-board USB-JTAG PLS debugger and HW selection mode to use stand-alone JTAG debuggers.
- Board power supply: through external +12 V PSU or from the USB bus (5 V supply voltage).
- Seven LEDs: D6 for 5 V power on,D2 for Reset, D101, D102, D103 for PLS debugger section, D7 and D8 for PC3 and PC2 outputs
- Two push buttons (reset and user)
- A potentiometers for ADC input (user)
- Two extension headers (2 x 36 pin - 100 mil) for all LQFP144 pins and for quick connection to prototyping boards, additional modules and easy probing.
- JTAG interface (2 x 7 male 100mil connector)
- USB port (mini -B)
- 16 MHz crystal
- Specification:
- Board size 100 x 65 mm
- MCU: SPC560B54L5 - LQFP144
- 2 extension headers 2 x 36 pin - 100 mil
- DC connector (+12 V input)
- Mini USB - B
- JTAG 2 x 7 - 100 mil connector
Discovery Kit for SPC56 B line - with SPC560B54L5 MCU 批量生产85.75 立即购买 SPC5-EV-ADIS
-