The SPC564A70CALxx and SPC564A80CALxx is a calibration and emulation system supporting the STMicroelectronics®SPC564AXX family of automotive microprocessors.
The Calibration Adapter is designed to substitute the QFP device on an ECU version used during engine calibration.
The complete system consists of a SPC564A70CAL176 board or a SPC564A80CAL176 and a POLYPOD-TQ176 Poly-Pod which plugs directly into the motherboard.
The Calibration Adapter can also be used as emulation board as the Nexus trace port on CSP496 allows using the pins for application purpose.
- Support for LQFP176 MCU production package allowing calibration systems to be built without requiring modifications to the standard production system housing
- 2 MB static RAM organized as 512 K words by 32 bits
- 32-bit multiplexed Calibration bus configuration;
- Support for Nexus-based debug tools even if application PCB does not include Nexus connector
- Nexus functionality with 12 Message Data Out (MDO) signals
- Support for full-feature calibration tools via availability of comprehensive set of device signals available on the connectors.
- ERNI 154819 connector optimized for calibration
- High speed CAN transceiver with signals protection
- Board size 36 x 64.5 mm
- Target connector compatible with TQPACK176SD
RoHS Compliance Grade
(**) st.com上提供的材料声明表单可能是基于包装系列中最常用的封装的通用文档。因此，它们可能不是100%适用于特定的设备。有关特定设备的信息，请联系 销售支持 。