The L6234 is a triple half bridge to drive a brushless DC motor.
It is realized in BCDmultipower technology which combines isolated DMOS power transistors with CMOS and bipolar circuits on the same chip.
By using mixed technology it has been possible to optimize the logic circuitry and the power stage to achieve the best possible performance.
The output DMOS transistors can sustain a very high current due to the fact that the DMOS structure is not affected by the second breakdown effect, the RMS maximum current is practically limited by the dissipation capability of the package.
All the logic inputs are TTL, CMOS and μP compatible. Each channel is controlled by two separate logic inputs.
The L6234 device is available in a 20-pin PowerSO20 package.
- Supply voltage from 7 to 52 V
- 5 A peak current
- RDSon 0.3 Ω typ. value at 25 °C
- Cross conduction protection
- TTL compatible driver
- Operating frequency up to 150 kHz
- Thermal shutdown
- Intrinsic fast free wheeling diodes
- Input and enable function for each half bridge
- 10 V external reference available
Advanced brushless DC motor drivers with embedded 32-bit MCU
RoHS Compliance Grade
(**) st.com上提供的材料声明表单可能是基于包装系列中最常用的封装的通用文档。因此，它们可能不是100%适用于特定的设备。有关特定设备的信息，请联系 销售支持 。
Extend the Runtime of Your Battery-Powered ApplicationsSTSW-SPIN002
Evaluation software with graphical user interface for STSPIN motor driver ICs
X-NUCLEO expansion boards and X-CUBE softwareX-NUCLEO-IHM06A1
Low voltage stepper motor driver expansion board based on the STSPIN220 for STM32 NucleoX-CUBE-SPN6
Low voltage stepper motor driver software expansion for STM32CubeX-NUCLEO-IHM11M1
Low voltage three-phase brushless DC motor driver expansion board based on STSPIN230 for STM32 NucleoX-CUBE-SPN11
Low voltage three-phase brushless DC motor driver software expansion for STM32CubeX-NUCLEO-IHM12A1
Low voltage dual brush DC motor driver expansion board based on STSPIN240 for STM32 NucleoX-CUBE-SPN12
Low voltage dual brush DC motor driver software expansion for STM32Cube