-
The device is a high-voltage converter that smartly integrates an 800 V avalanche rugged power MOSFET with PWM current-mode control. The power MOSFET with 800 V breakdown voltage allows extended input voltage range to be applied, as well as to reduce the size of the DRAIN snubber circuit. This IC is capable of meeting the most stringent energy-saving standards as it has very low consumption and operates in pulse frequency modulation under light load. The Zero-Power mode (ZPM) feature enables the IC to work in an idle state, where the system is totally shutdown. An MCU can be easily connected to the IC for smart ZPM management and it can be supplied by the IC itself during the idle state. The design of flyback, buck and buck boost converters is supported. The integrated HV startup, sense FET, error amplifier and oscillator with jitter allow a complete application to be designed with a minimum component count. In flyback non isolated topology, a negative output voltage is easily set thanks to the integrated error amplifier with separate ground.
Key Features
- Smart stand-by architecture using the Zero Power Mode (ZPM)
- ZPM management by MCU easily realizable
- 800 V avalanche-rugged power MOSFET allowing ultra wide VAC input range to be covered
- Embedded HV startup and sense-FET
- Current mode PWM controller
- Drain current limit protection (OCP)
- Wide supply voltage range: 4.5 V to 30 V
- Self-supply option allows to remove the auxiliary winding or bias components
- Minimized system input power consumption:
- Less than 4 mW @ 230 VAC in ZPM
- Less than 10 mW @ 230 VAC in no-load condition
- Less than 400 mW @ 230 VAC with 250 mW load
- Jittered switching frequency reduces the EMI filter cost
- 60 kHz ±7% (type L)
- 120 kHz ±7% (type H)
- Embedded E/A with 1.2 V reference and separate ground for easy negative voltage setting
- Protections with automatic restart: overload/short circuit (OLP), max. duty cycle counter, VCC clamp
- Pulse-skip protection to prevent flux-runaway
- Embedded thermal shutdown
- Built in soft start for improved system reliability
样片和购买
| 产品型号 | 封装 | 包装类型 | 供货状态 | 预算价格(US$) | 数量 | RDS(on) (Ω) (max) | Transistor Breakdown Voltage (V) (min) | Drain Current (A) (nom) | ECCN (US) | Country of Origin | More info | 从分销商订购 | 从ST订购 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| VIPER0PHDTR | SO-16 | Tape And Reel |
批量生产
|
0.422 | 1000 | 20 | 800 | 0.4 | EAR99 | CHINA | 查看供货情况 | 获取样片 | |
| VIPER0PLDTR | SO-16 | Tape And Reel |
批量生产
|
0.422 | 1000 | 20 | 800 | 0.4 | EAR99 | CHINA | 查看供货情况 | 获取样片 | |
| VIPER0PHD | SO-16 | Tube |
批量生产
|
0.422 | 1000 | 20 | 800 | 0.4 | EAR99 | CHINA | 查看供货情况 | ||
| VIPER0PLD | SO-16 | Tube |
批量生产
|
0.422 | 1000 | 20 | 800 | 0.4 | EAR99 | CHINA | 没有经销商，请联系我们的销售办事处 | 立即购买 |
VIPER0PHD
封装
SO-16包装类型
Tube单价(US$)
0.422*
精选 视频
评估工具
-
-
Picture Part number 制造商 描述 
STEVAL-ISA174V1 ST 7 W dual output offline flyback converter for home appliances using VIPer0P 
STEVAL-ISA179V1 ST 15 V, 0.15 A buck converter using VIPer™ Plus - VIPer0P 
STEVAL-ISA180V1 -- 12 V - 0.6 A flyback isolated converter using VIPer™ Plus - VIPer0P 
STEVAL-ISA181V1 ST 12 V / 600 mA high voltage flyback converter with remote standby control using the VIPer0P 
STEVAL-ISA192V1 ST 7 W dual output flyback converter with standby managed by capacitive touch using VIPer0P and STM32L 产品型号7 W dual output offline flyback converter for home appliances using VIPer0P
15 V, 0.15 A buck converter using VIPer™ Plus - VIPer0P
12 V - 0.6 A flyback isolated converter using VIPer™ Plus - VIPer0P
12 V / 600 mA high voltage flyback converter with remote standby control using the VIPer0P
7 W dual output flyback converter with standby managed by capacitive touch using VIPer0P and STM32L
-
| 产品型号 | 供货状态 | 封装 | 等级规格 | 符合RoHS级别 | Material Declaration** |
|---|---|---|---|---|---|
| VIPER0PHD |
批量生产
|
SO-16 | 工业 | Ecopack2 |
|
| VIPER0PHDTR |
批量生产
|
SO-16 | 工业 | Ecopack2 |
|
| VIPER0PLD |
批量生产
|
SO-16 | 工业 | Ecopack2 | |
| VIPER0PLDTR |
批量生产
|
SO-16 | 工业 | Ecopack2 |
(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.
