Overview
Solutions
HW Evaluation Tools
Resources
Tools and Software
Key Products
Get Started

Digital Addressable Lighting Interface (DALI) is a trademark for a network-based technology used to effectively control lighting in building automation. Originally defined in IEC 60929 standards, it’s updated in IEC 62386 which includes LED device types.

We provide a range of analog and digital controllers and STM32 microcontrollers to implement the AC-DC and DC-DC power converter and run the DALI protocol.

Part Number
Description
STEVAL-ILM001V1 Plug-in hardware module for the STM8S-DISCOVERY interface for DALI communication Quick view

Key Features

  • Level translation from DALI voltage levels (-6.5 to 22.5 V) to microcontroller levels (3.3 V / 5 V logic)
  • Proper rise/fall times for the communication
  • Current consumption limit (2 mA max.)
  • Overvoltage protection for misconnection of rated mains voltage to DALI DA connectors
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ILL075V1 STLUX385A evaluation board Quick view

Key Features

  • All STLUX385A pins available on connectors
  • Convenient tool for validating SMED algorithms
  • Graphical interface for SMED configuration
  • On-board components for tutorial
  • Micro-USB port for PC connectivity
  • USB, external or SWIM power supply
  • SWIM interface with STLINK or RLINK connectors
  • Four extra footprint areas for SOT23-6 and one for SO8
  • One external clock (HSE) footprint area
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ILL066V2 100 W LED street lighting evaluation board using the STLUX385A digital controller Quick view

Key Features

  • based on STLUX385A digital controller
  • high efficiency (92%)
  • primary side controlled
  • up to 100 W (100 V at 1 A or 200 V at 0.5 A)
  • single isolated output suitable for LED connection
  • wide input voltage range: 90 V to 265 V AC
  • adjustable LED current and dimming
  • output resolution: 11-bit equivalent
  • IDLE mode power consumption: < 250 mW
  • real-time fault detection and protection (short-circuit or open circuit)
  • remote control via:
    • DALI ed.2.0
    • 0 - 10 V
    • UART
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ILL078V1 1 A, up to 60V Vin, buck LED driver board based on the LED6000 Quick view

Key Features

  • 4.5 V to 60 V input voltage
  • Step-down conversion
  • 1 A programmed LED current
  • 500 kHz switching frequency
  • Digital dimming
  • Uses ceramic output capacitors
  • 180° out-of-phase synchronization available
  • Auto-recovery overcurrent and thermal protection
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
Part Number
STEVAL-ILM001V1

Plug-in hardware module for the STM8S-DISCOVERY interface for DALI communication

Key Features

  • Level translation from DALI voltage levels (-6.5 to 22.5 V) to microcontroller levels (3.3 V / 5 V logic)
  • Proper rise/fall times for the communication
  • Current consumption limit (2 mA max.)
  • Overvoltage protection for misconnection of rated mains voltage to DALI DA connectors
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ILL075V1

STLUX385A evaluation board

Key Features

  • All STLUX385A pins available on connectors
  • Convenient tool for validating SMED algorithms
  • Graphical interface for SMED configuration
  • On-board components for tutorial
  • Micro-USB port for PC connectivity
  • USB, external or SWIM power supply
  • SWIM interface with STLINK or RLINK connectors
  • Four extra footprint areas for SOT23-6 and one for SO8
  • One external clock (HSE) footprint area
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ILL066V2

100 W LED street lighting evaluation board using the STLUX385A digital controller

Key Features

  • based on STLUX385A digital controller
  • high efficiency (92%)
  • primary side controlled
  • up to 100 W (100 V at 1 A or 200 V at 0.5 A)
  • single isolated output suitable for LED connection
  • wide input voltage range: 90 V to 265 V AC
  • adjustable LED current and dimming
  • output resolution: 11-bit equivalent
  • IDLE mode power consumption: < 250 mW
  • real-time fault detection and protection (short-circuit or open circuit)
  • remote control via:
    • DALI ed.2.0
    • 0 - 10 V
    • UART
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ILL078V1

1 A, up to 60V Vin, buck LED driver board based on the LED6000

Key Features

  • 4.5 V to 60 V input voltage
  • Step-down conversion
  • 1 A programmed LED current
  • 500 kHz switching frequency
  • Digital dimming
  • Uses ceramic output capacitors
  • 180° out-of-phase synchronization available
  • Auto-recovery overcurrent and thermal protection
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
00 Files selected for download

Technical Documentation

    • Description Version Size Action
      AN4406
      MDmesh™ M2: the new ST super-junction technology ideal for resonant topologies
      1.0
      652.78 KB
      PDF
      AN3298
      STM8S DALI slave library
      1.4
      391.05 KB
      PDF
      AN4406

      MDmesh™ M2: the new ST super-junction technology ideal for resonant topologies

      AN3298

      STM8S DALI slave library

    • Description Version Size Action
      UM1032
      STEVAL-ILM001V1 hardware module for the STM8S-DISCOVERY interface for DALI communication
      1.1
      438.54 KB
      PDF
      UM1728
      STM32F1xx DALI slave interface
      1.0
      1.87 MB
      PDF
      UM1629
      STM32L1xx DALI slave interface
      1.0
      1.08 MB
      PDF
      UM1032

      STEVAL-ILM001V1 hardware module for the STM8S-DISCOVERY interface for DALI communication

      UM1728

      STM32F1xx DALI slave interface

      UM1629

      STM32L1xx DALI slave interface

Publications and Collaterals

    • Description Version Size Action
      600-650 V MDmesh™ M2: The ST’s new Super-junction HV MOSFET series 1.0
      755.53 KB
      PDF
      STLUX385A 100 W LED street lighting 1.0
      2.02 MB
      PDF
      STLUX: Intelligent lighting made easy 07.2017
      280.46 KB
      PDF

      600-650 V MDmesh™ M2: The ST’s new Super-junction HV MOSFET series

      STLUX385A 100 W LED street lighting

      STLUX: Intelligent lighting made easy

    • Description Version Size Action
      Products and solutions for Smart industry 3.0
      2.99 MB
      PDF

      Products and solutions for Smart industry

Development Tools

Embedded Software

    • Part Number

      STM8S DALI library example (AN3298)

Interfaces and Transceivers

Part number Description
STKNX Miniature KNX transceiver with voltage regulators
Part number
Miniature KNX transceiver with voltage regulators

Power Management

Part number Description
LED6000 3 A, 61 V monolithic current source with dimming capability
STLUX285A Digital controllers for lighting and power conversion applications with up to 6 programmable PWM generators, 96 MHz PLL, DALI
STLUX325A Digital controllers for lighting and power conversion applications with up to 6 programmable PWM generators, 96 MHz PLL, DALI
STLUX385A Digital controllers for lighting and power conversion applications with up to 6 programmable PWM generators, 96 MHz PLL, DALI
Part number
3 A, 61 V monolithic current source with dimming capability
Digital controllers for lighting and power conversion applications with up to 6 programmable PWM generators, 96 MHz PLL, DALI
Digital controllers for lighting and power conversion applications with up to 6 programmable PWM generators, 96 MHz PLL, DALI
Digital controllers for lighting and power conversion applications with up to 6 programmable PWM generators, 96 MHz PLL, DALI

Power Transistors

Part number Description
STF10N60M2 N-channel 600 V, 0.55 Ohm typ., 7.5 A MDmesh M2 Power MOSFET in TO-220FP package
STF13N60M2 N-channel 600 V, 0.35 Ohm typ., 11 A MDmesh M2 Power MOSFET in TO-220FP package
STF7N60M2 N-channel 600 V, 0.86 Ohm typ., 5 A MDmesh M2 Power MOSFET in TO-220FP package
STL20DN10F7 Dual N-channel 100 V, 0.065 Ohm typ., 5 A STripFET F7 Power MOSFET in a PowerFLAT 5x6 double island
STL7N10F7 N-channel 100 V, 0.027 Ohm typ., 7 A STripFET F7 Power MOSFET in a PowerFLAT 3.3x3.3 package
Part number
N-channel 600 V, 0.55 Ohm typ., 7.5 A MDmesh M2 Power MOSFET in TO-220FP package
N-channel 600 V, 0.35 Ohm typ., 11 A MDmesh M2 Power MOSFET in TO-220FP package
N-channel 600 V, 0.86 Ohm typ., 5 A MDmesh M2 Power MOSFET in TO-220FP package
Dual N-channel 100 V, 0.065 Ohm typ., 5 A STripFET F7 Power MOSFET in a PowerFLAT 5x6 double island
N-channel 100 V, 0.027 Ohm typ., 7 A STripFET F7 Power MOSFET in a PowerFLAT 3.3x3.3 package