Overview
Solutions
HW Evaluation Tools
Resources
Tools and Software
Key Products
Get Started

Lighting solutions for stage illumination often comprise a variety of functions including selective visibility, focus lighting, mood enhancement, light projection, stage emphasis, and multi-color effects all meant to enhance the impact of a live show. In addition, stage lighting installations require the capability to precisely control the trajectories of moving elements such as spotlights.

Our offers spans from AC-DC and DC-DC power conversion and integrated motor control solutions together with high-performance STM32 microcontrollers. In addition, we provide a range of wired and wireless connectivity solutions to help design advanced stage lighting solutions.

Part Number
Description
X-NUCLEO-IHM04A1 Dual brush DC motor driver expansion board based on L6206 for STM32 Nucleo Quick view

Key Features

  • Voltage range from 8 V to 50 V max.
  • Phase current up to 2.8 A r.m.s.
  • Direct output driving
  • Mounting position for shunt resistors available
  • Undervoltage lockout
  • Programmable high side overcurrent protection
  • Thermal protection shutdown
  • Compatible with Arduino UNO R3 connector
  • Compatible with STM32 Nucleo boards
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
EVAL6494L Demonstration board for L6494L gate driver Quick view

Key Features

  • Driver current capability: 2 A source, 2.5 A sink
  • Integrated bootstrap diode
  • Single input and shutdown pin
  • Adjustable deadtime
  • 3.3 V, 5 V TTL/CMOS inputs with hysteresis
  • UVLO on both high-side and low-side sections
  • dV/dt immunity: 50 V/ns in full temperature range
  • Compact and simplified layout
  • Bill of material reduction
  • Flexible, easy and fast design

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
X-NUCLEO-LED61A1 DC-DC LED driver expansion board based on LED6001 for STM32 Nucleo Quick view

Key Features

  • Single channel LED Driver, 350 mA constant current
  • PWM and analog brightness control with the STM32 Nucleo board
  • Selectable boost or SEPIC converter topology
  • Up to 92% efficiency (boost converter)
  • Open LED, feedback disconnection, LED overcurrent and output-to-ground short-circuit (SEPIC only) fault detection and management
  • Onboard photo-transistor for ambient light switch function (analog dimming)
  • Wide DC input voltage range: 8 V – 24 V
  • Compatible with Arduino™ UNO R3 connectors
  • Compatible with STM32 Nucleo boards
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
X-NUCLEO-LED16A1 16 channel LED driver expansion board based on LED1642GW for STM32 Nucleo Quick view

Key Features

  • 16 constant current output channels
  • Output current: from 3 mA to 40 mA
  • 20 V current generator rated voltage
  • Provision for cascading multiple expansion boards
  • Current adjustment:
    • 7-bit global current gain adjustment in two ranges
    • Current programmable through external resistor
    • 12/16-bit PWM grayscale brightness control
  • Selectable LED Bus voltage supply
    • USB
    • Vexternal
  • Error detection
    • Open LED
    • Shorted LED
  • Thermal shutdown
  • Compatible with STM32 Nucleo board
  • Equipped with Arduino™ UNO R3 connector
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-LDO001V1 Quad high performance LDO evaluation board based on LDBL20, LDLN025, LD39130S and STLQ020 Quick view

Key Features

  • Multi LDO evaluation board based on four high performance low dropout linear voltage regulators in miniature packages
  • Key features:
    • Low operating input voltage (from 1.4 V to 5.5 V)
    • Current capability from 200 mA to 300 mA
    • Low dropout (down to 160 mV typ.)
    • Ultra-low quiescent current (down to 500 nA typ.)
    • Low noise (down to 6.5 μVRMS typ.)
    • High PSSR (up to 80 dB)
    • Logic controlled electronic shutdown (enable)
    • Tiny packages (DFN-6L, Flip-chip, ST STAMP™)
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ILL002V4 High-brightness LED driver with diagnostics (40 LEDs) demonstration board based on the STP08DP05 Quick view

Key Features

  • DC-DC converter
  • Brightness regulation
  • Animated text
  • Blinking speed regulation
  • Graphic user interface (GUI)
  • Error detection on output

Show More

STEVAL-ISA084V1 4 A peak, 800 kHz fixed-frequency PWM synchronous step-down demonstration board with enable on/off based on the ST1S40 Quick view

Key Features

  • Vin : 4 V to 18 V
  • Vout: 3.3 V
  • Maximum output current: 4 A
  • Switching frequency: 800 kHz
  • Short-circuit: protected
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISA099V1 3 A step-down switching demonstration board based on the L7986 in DFN10 package Quick view

Key Features

  • 3 A DC output current
  • From 4.5 V to 38 V range input voltage
  • Output voltage adjustable from 0.6 V
  • 250 kHz switching frequency programmable up to 1 MHz
  • Internal soft-start and enable
  • Low dropout operation: 100% duty cycle
  • Voltage feed-forward
  • Zero load current operation
  • Overcurrent and thermal protection
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
EVAL6206Q Dual full bridge with programmable overcurrent Quick view

Key Features

  • Voltage range from 8 to 52 V
  • Phase current up to 2.5 Ar.m.s.
  • Adjustable overcurrent threshold
  • Logic inputs 5 V / 3.3 V compliant
  • Small application footprint with high thermal performance
  • Suitable for use in combination with PractiSPIN™ 2 software

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
EVAL6393FB Low voltage full bridge reference design board featuring L6393 advanced high-voltage gate driver Quick view

Key Features

  • ~150 W drive capability (50 V - 3.0 Ar.m.s. )
  • Very low area occupation, all devices and power switches in SMD package (no heatsink)
  • Fast-decay or slow-decay on-board constant off-time peak current control
  • PWM voltage mode control with overcurrent protection possible via external logic signals
  • Driver supply voltage on-board generation directly from BUS voltage
  • Carefully optimized layout

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
EVAL6207Q Dual full bridge with integrated PWM current controllers Quick view

Key Features

  • Voltage range from 8 V to 52 V
  • Phase current up to 2.5 Ar.m.s.
  • Adjustable constant tOFF PWM current control
  • Logic inputs 5 V / 3.3 V compliant
  • Small application footprint with high thermal performance
  • Suitable to be used in combination with PractiSPINTM 2 software

Show More

STEVAL-ISA152V1 3.3 V/3 A high efficiency step down DC-DC converter (VIN= 4.5 to 60 V) based on the L7987 Quick view

Key Features

  • 3.3 V output voltage
  • 3 A DC output current
  • 4.5 V to 60 V input voltage
  • 500 kHz switching frequency
  • 3.5 ms programmed soft-start
  • VBIAS switch-over for improved efficiency at light load
  • 180° out of phase synchronization available
  • Open drain PGOOD available
  • Auto recovery overcurrent and thermal protection
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISA158V1 38 V - 2 A synchronous step-down switching regulator evaluation board based on the A6986 Quick view

Key Features

  • 4 V to 38 V operating input voltage
  • Low consumption mode or low noise mode
  • 30 µA IQ at light load (LCM VOUT = 3.3 V)
  • 5 µA IQ-SHTDWN
  • Adjustable fSW (250 kHz - 2 MHz)
  • Output voltage adjustable from 0.85 V to VIN
  • Embedded output voltage supervisor
  • Synchronization
  • Adjustable soft-start time
  • Internal current limiting
  • Overvoltage protection
  • Output voltage sequencing
  • Peak current mode architecture
  • RDS(on)HS = 180 mΩ; RDS(on)LS = 150 mΩ
  • Thermal shutdown
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
EVALSTDRV600HB8 Demonstration board kit for L638xE and L639x high-voltage gate drivers Quick view

Key Features

  • Half-bridge configuration
  • High voltage rail up to 600 V
  • Includes samples of each compatible gate driver in SO8 package
    • L6385E, L6387E, L6388E, L6389E,
    • L6395, L6398, L6399
  • Compatible with MOSFETs/IGBTs in
    • DPAK, D2PAK, TO-220, TO-220FP
  • dV/dt transient immunity ± 50 V/ns in full temperature range
  • Integrated bootstrap diode
  • Dedicated high- and low-side driving inputs
  • Compact and simplified layout
  • Gate drivers in the kit features different functionalities and characteristics
    • UVLO on both - high-side and low-side
    • Internal deadtime, or no deadtime
    • Interlocking for anti cross-conduction protection
    • Ability to drive asymmetrical half-bridges and switched reluctance motors
    • Active high or active low LIN for single input gate driving

Show More

FEATURED RESOURCES

Schematics BOM Gerber
EVAL6498L Evaluation board for the L6498L gate driver Quick view

Key Features

  • Driver current capability: 2 A source, 2.5 A sink
  • Integrated bootstrap diode
  • Interlocking function
  • 3.3 V, 5 V TTL/CMOS inputs with hysteresis
  • UVLO on both high-side and low-side sections
  • dV/dt immunity: 50 V/ns in full temperature range
  • Compact and simplified layout
  • Bill of material reduction
  • Flexible, easy and fast design

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
EVAL6491HB Demonstration board for L6491 gate driver with smart shut down feature Quick view

Key Features

  • High voltage rail up to 600 V
  • dV/dt immunity: 50 V/ns in full temperature range
  • Driver current capability: 4 A source/sink
  • Comparator for fault protections
  • Smart shutdown function
  • Integrated bootstrap diode
  • Adjustable deadtime
  • Interlocking function
  • Switching times 15 ns rise/fall with 1 nF load
  • 3.3 V, 5 V TTL/CMOS inputs with hysteresis
  • Compact and simplified layout
  • Bill of material reduction
  • Effective fault protection
  • Flexible, easy and fast design

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
Part Number
X-NUCLEO-IHM04A1

Dual brush DC motor driver expansion board based on L6206 for STM32 Nucleo

Key Features

  • Voltage range from 8 V to 50 V max.
  • Phase current up to 2.8 A r.m.s.
  • Direct output driving
  • Mounting position for shunt resistors available
  • Undervoltage lockout
  • Programmable high side overcurrent protection
  • Thermal protection shutdown
  • Compatible with Arduino UNO R3 connector
  • Compatible with STM32 Nucleo boards
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
EVAL6494L

Demonstration board for L6494L gate driver

Key Features

  • Driver current capability: 2 A source, 2.5 A sink
  • Integrated bootstrap diode
  • Single input and shutdown pin
  • Adjustable deadtime
  • 3.3 V, 5 V TTL/CMOS inputs with hysteresis
  • UVLO on both high-side and low-side sections
  • dV/dt immunity: 50 V/ns in full temperature range
  • Compact and simplified layout
  • Bill of material reduction
  • Flexible, easy and fast design

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
X-NUCLEO-LED61A1

DC-DC LED driver expansion board based on LED6001 for STM32 Nucleo

Key Features

  • Single channel LED Driver, 350 mA constant current
  • PWM and analog brightness control with the STM32 Nucleo board
  • Selectable boost or SEPIC converter topology
  • Up to 92% efficiency (boost converter)
  • Open LED, feedback disconnection, LED overcurrent and output-to-ground short-circuit (SEPIC only) fault detection and management
  • Onboard photo-transistor for ambient light switch function (analog dimming)
  • Wide DC input voltage range: 8 V – 24 V
  • Compatible with Arduino™ UNO R3 connectors
  • Compatible with STM32 Nucleo boards
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
X-NUCLEO-LED16A1

16 channel LED driver expansion board based on LED1642GW for STM32 Nucleo

Key Features

  • 16 constant current output channels
  • Output current: from 3 mA to 40 mA
  • 20 V current generator rated voltage
  • Provision for cascading multiple expansion boards
  • Current adjustment:
    • 7-bit global current gain adjustment in two ranges
    • Current programmable through external resistor
    • 12/16-bit PWM grayscale brightness control
  • Selectable LED Bus voltage supply
    • USB
    • Vexternal
  • Error detection
    • Open LED
    • Shorted LED
  • Thermal shutdown
  • Compatible with STM32 Nucleo board
  • Equipped with Arduino™ UNO R3 connector
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-LDO001V1

Quad high performance LDO evaluation board based on LDBL20, LDLN025, LD39130S and STLQ020

Key Features

  • Multi LDO evaluation board based on four high performance low dropout linear voltage regulators in miniature packages
  • Key features:
    • Low operating input voltage (from 1.4 V to 5.5 V)
    • Current capability from 200 mA to 300 mA
    • Low dropout (down to 160 mV typ.)
    • Ultra-low quiescent current (down to 500 nA typ.)
    • Low noise (down to 6.5 μVRMS typ.)
    • High PSSR (up to 80 dB)
    • Logic controlled electronic shutdown (enable)
    • Tiny packages (DFN-6L, Flip-chip, ST STAMP™)
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ILL002V4

High-brightness LED driver with diagnostics (40 LEDs) demonstration board based on the STP08DP05

Key Features

  • DC-DC converter
  • Brightness regulation
  • Animated text
  • Blinking speed regulation
  • Graphic user interface (GUI)
  • Error detection on output

Show More

STEVAL-ISA084V1

4 A peak, 800 kHz fixed-frequency PWM synchronous step-down demonstration board with enable on/off based on the ST1S40

Key Features

  • Vin : 4 V to 18 V
  • Vout: 3.3 V
  • Maximum output current: 4 A
  • Switching frequency: 800 kHz
  • Short-circuit: protected
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISA099V1

3 A step-down switching demonstration board based on the L7986 in DFN10 package

Key Features

  • 3 A DC output current
  • From 4.5 V to 38 V range input voltage
  • Output voltage adjustable from 0.6 V
  • 250 kHz switching frequency programmable up to 1 MHz
  • Internal soft-start and enable
  • Low dropout operation: 100% duty cycle
  • Voltage feed-forward
  • Zero load current operation
  • Overcurrent and thermal protection
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
EVAL6206Q

Dual full bridge with programmable overcurrent

Key Features

  • Voltage range from 8 to 52 V
  • Phase current up to 2.5 Ar.m.s.
  • Adjustable overcurrent threshold
  • Logic inputs 5 V / 3.3 V compliant
  • Small application footprint with high thermal performance
  • Suitable for use in combination with PractiSPIN™ 2 software

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
EVAL6393FB

Low voltage full bridge reference design board featuring L6393 advanced high-voltage gate driver

Key Features

  • ~150 W drive capability (50 V - 3.0 Ar.m.s. )
  • Very low area occupation, all devices and power switches in SMD package (no heatsink)
  • Fast-decay or slow-decay on-board constant off-time peak current control
  • PWM voltage mode control with overcurrent protection possible via external logic signals
  • Driver supply voltage on-board generation directly from BUS voltage
  • Carefully optimized layout

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
EVAL6207Q

Dual full bridge with integrated PWM current controllers

Key Features

  • Voltage range from 8 V to 52 V
  • Phase current up to 2.5 Ar.m.s.
  • Adjustable constant tOFF PWM current control
  • Logic inputs 5 V / 3.3 V compliant
  • Small application footprint with high thermal performance
  • Suitable to be used in combination with PractiSPINTM 2 software

Show More

STEVAL-ISA152V1

3.3 V/3 A high efficiency step down DC-DC converter (VIN= 4.5 to 60 V) based on the L7987

Key Features

  • 3.3 V output voltage
  • 3 A DC output current
  • 4.5 V to 60 V input voltage
  • 500 kHz switching frequency
  • 3.5 ms programmed soft-start
  • VBIAS switch-over for improved efficiency at light load
  • 180° out of phase synchronization available
  • Open drain PGOOD available
  • Auto recovery overcurrent and thermal protection
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
STEVAL-ISA158V1

38 V - 2 A synchronous step-down switching regulator evaluation board based on the A6986

Key Features

  • 4 V to 38 V operating input voltage
  • Low consumption mode or low noise mode
  • 30 µA IQ at light load (LCM VOUT = 3.3 V)
  • 5 µA IQ-SHTDWN
  • Adjustable fSW (250 kHz - 2 MHz)
  • Output voltage adjustable from 0.85 V to VIN
  • Embedded output voltage supervisor
  • Synchronization
  • Adjustable soft-start time
  • Internal current limiting
  • Overvoltage protection
  • Output voltage sequencing
  • Peak current mode architecture
  • RDS(on)HS = 180 mΩ; RDS(on)LS = 150 mΩ
  • Thermal shutdown
  • RoHS compliant

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
EVALSTDRV600HB8

Demonstration board kit for L638xE and L639x high-voltage gate drivers

Key Features

  • Half-bridge configuration
  • High voltage rail up to 600 V
  • Includes samples of each compatible gate driver in SO8 package
    • L6385E, L6387E, L6388E, L6389E,
    • L6395, L6398, L6399
  • Compatible with MOSFETs/IGBTs in
    • DPAK, D2PAK, TO-220, TO-220FP
  • dV/dt transient immunity ± 50 V/ns in full temperature range
  • Integrated bootstrap diode
  • Dedicated high- and low-side driving inputs
  • Compact and simplified layout
  • Gate drivers in the kit features different functionalities and characteristics
    • UVLO on both - high-side and low-side
    • Internal deadtime, or no deadtime
    • Interlocking for anti cross-conduction protection
    • Ability to drive asymmetrical half-bridges and switched reluctance motors
    • Active high or active low LIN for single input gate driving

Show More

FEATURED RESOURCES

Schematics BOM Gerber
EVAL6498L

Evaluation board for the L6498L gate driver

Key Features

  • Driver current capability: 2 A source, 2.5 A sink
  • Integrated bootstrap diode
  • Interlocking function
  • 3.3 V, 5 V TTL/CMOS inputs with hysteresis
  • UVLO on both high-side and low-side sections
  • dV/dt immunity: 50 V/ns in full temperature range
  • Compact and simplified layout
  • Bill of material reduction
  • Flexible, easy and fast design

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
EVAL6491HB

Demonstration board for L6491 gate driver with smart shut down feature

Key Features

  • High voltage rail up to 600 V
  • dV/dt immunity: 50 V/ns in full temperature range
  • Driver current capability: 4 A source/sink
  • Comparator for fault protections
  • Smart shutdown function
  • Integrated bootstrap diode
  • Adjustable deadtime
  • Interlocking function
  • Switching times 15 ns rise/fall with 1 nF load
  • 3.3 V, 5 V TTL/CMOS inputs with hysteresis
  • Compact and simplified layout
  • Bill of material reduction
  • Effective fault protection
  • Flexible, easy and fast design

Show More

IMAGE

Image
Image

FEATURED RESOURCES

Schematics BOM Gerber
00 Files selected for download

Technical Documentation

    • Description Version Size Action
      AN4607
      Basics on the thyristor (SCR) structure and its application
      2.0
      317.41 KB
      PDF
      AN2680
      Fan speed controller based on STDS75 or STLM75 digital temperature sensor and ST72651AR6 MCU
      1.4
      125.82 KB
      PDF
      AN4250
      Fishbone diagram for power factor correction
      1.1
      772.32 KB
      PDF
      AN4539
      HRTIM cookbook
      3.0
      1.17 MB
      PDF
      AN4608
      How to select the right thyristor (SCR) for your application
      1.0
      895.7 KB
      PDF
      AN2648
      Increasing the resolution of analog temperature sensors
      1.4
      161.7 KB
      PDF
      AN4606
      Inrush-current limiter circuits (ICL) with Triacs and Thyristors (SCR) and controlled bridge design tips
      2.2
      1,008.92 KB
      PDF
      AN1299
      L638xE tricks and tips
      3.0
      718.2 KB
      PDF
      AN2738
      L6390 half-bridge gate driver
      2.3
      3.12 MB
      PDF
      AN2785
      L6393 half bridge gate driver
      1.2
      1.98 MB
      PDF
      AN4406
      MDmesh™ M2: the new ST super-junction technology ideal for resonant topologies
      1.0
      652.78 KB
      PDF
      AN3168
      Non-insulated SCR / Triac control circuits
      1.2
      315.8 KB
      PDF
      AN5046
      Printed circuit board assembly recommendations for STMicroelectronics PowerFLAT packages
      4.0
      4.82 MB
      PDF
      AN2123
      TD351 Advanced IGBT Driver Principles of operation and application
      1.6
      967.78 KB
      PDF
      AN303
      Thyristors and TRIACs: latching current
      3.4
      164.96 KB
      PDF
      AN4607

      Basics on the thyristor (SCR) structure and its application

      AN2680

      Fan speed controller based on STDS75 or STLM75 digital temperature sensor and ST72651AR6 MCU

      AN4250

      Fishbone diagram for power factor correction

      AN4539

      HRTIM cookbook

      AN4608

      How to select the right thyristor (SCR) for your application

      AN2648

      Increasing the resolution of analog temperature sensors

      AN4606

      Inrush-current limiter circuits (ICL) with Triacs and Thyristors (SCR) and controlled bridge design tips

      AN1299

      L638xE tricks and tips

      AN2738

      L6390 half-bridge gate driver

      AN2785

      L6393 half bridge gate driver

      AN4406

      MDmesh™ M2: the new ST super-junction technology ideal for resonant topologies

      AN3168

      Non-insulated SCR / Triac control circuits

      AN5046

      Printed circuit board assembly recommendations for STMicroelectronics PowerFLAT packages

      AN2123

      TD351 Advanced IGBT Driver Principles of operation and application

      AN303

      Thyristors and TRIACs: latching current

Presentations & Training Material

    • Description Version Size Action
      An introduction to electric motors 1.0
      2.23 MB
      PDF

      An introduction to electric motors

Publications and Collaterals

    • Description Version Size Action
      800-1050V MDmesh™ K5 ST’s first super-junction VHV MOSFET Series 1.0
      516.44 KB
      PDF
      STTS75 2.2
      706.56 KB
      PDF

      800-1050V MDmesh™ K5 ST’s first super-junction VHV MOSFET Series

      STTS75

    • Description Version Size Action
      STSPIN motor drivers 11.2017
      1.6 MB
      PDF

      STSPIN motor drivers

    • Description Version Size Action
      Motor Control Reference Guide 15.10
      2.61 MB
      PDF
      Products and solutions for Smart industry 3.0
      2.99 MB
      PDF

      Motor Control Reference Guide

      Products and solutions for Smart industry

    • Description Version Size Action
      Smart solution for high end stepper motor driver 1.0
      264.21 KB
      PDF

      Smart solution for high end stepper motor driver

Embedded Software

    • Part Number

      Fan speed controller based on STDS75 or STLM75 digital temperature sensor and ST72651AR6 MCU

Diodes and Rectifiers

Part number Description
STPSC20H12 1200 V, 20 A High surge Silicon Carbide Power Schottky Diode
STPSC6H12 1200 V, 6 A High Surge Silicon Carbide Power Schottky Diode
STPSC8H065 650 V, 8 A High surge Silicon Carbide Power Schottky Diode
Part number
1200 V, 20 A High surge Silicon Carbide Power Schottky Diode
1200 V, 6 A High Surge Silicon Carbide Power Schottky Diode
650 V, 8 A High surge Silicon Carbide Power Schottky Diode

MEMS and Sensors

Part number Description
LM135 Precision Temperature Sensor
LM235 Precision Temperature Sensor
LM335 Precision Temperature Sensor
STDS75 Digital temperature sensor and thermal watchdog
STLM20 Analog temperature sensor, ultra-low current 2.4 V, high precision
STLM75 High-precision digital temperature sensor and thermal watchdog
STTS2004 2.2 V memory module temperature sensor with a 4 Kb SPD EEPROM
STTS75 Digital temperature sensor and thermal watchdog, delta-sigma analog-to-digital (ADC) converter, I2C interface
STTS751 2.25 V low-voltage local digital temperature sensor
Part number
Precision Temperature Sensor
Precision Temperature Sensor
Precision Temperature Sensor
Digital temperature sensor and thermal watchdog
Analog temperature sensor, ultra-low current 2.4 V, high precision
High-precision digital temperature sensor and thermal watchdog
2.2 V memory module temperature sensor with a 4 Kb SPD EEPROM
Digital temperature sensor and thermal watchdog, delta-sigma analog-to-digital (ADC) converter, I2C interface
2.25 V low-voltage local digital temperature sensor

Motor Drivers

Part number Description
L6205 DMOS DUAL FULL BRIDGE DRIVER
L6206 DMOS dual full bridge driver
L6206Q DMOS dual full bridge driver
L6219DSA Stepper Motor Driver, Injection control
STSPIN840 Compact dual brushed DC motor driver
Part number
DMOS DUAL FULL BRIDGE DRIVER
DMOS dual full bridge driver
DMOS dual full bridge driver
Stepper Motor Driver, Injection control
Compact dual brushed DC motor driver

Power Management

Part number Description
L6390 High voltage high/ low-side driver
L6399 High voltage high and low-side driver
L6491 High voltage high and low-side 4 A gate driver
L6494 High voltage high and low-side 2 A gate driver
L6498 High voltage high and low-side 2 A gate driver
L6985F 38 V 500 mA synchronous step-down switching regulator with 30 uA quiescent current
L6986 38 V 2 A synchronous step-down switching regulator with 30 uA quiescent current
L6986F 38 V 1.5 A synchronous step-down switching regulator with 30 uA quiescent current
LD39130S 300 mA very low quiescent current Linear regulator IC with automatic Green mode
LDF 1A Very low drop voltage regulator IC
LDFM 500 mA very low drop voltage regulator
LED1642GW 16 Channels LED driver with Error detection, Current Gain Control and 12/16 bit PWM Brightness control
LED2472G 24-Channels LED driver with LED error detection and gain control
LED5000 3 A monolithic step-down current source with dimming capability
LED6000 3 A, 61 V monolithic current source with dimming capability
LED6001 PWM-dimmable single channel LED driver with integrated boost controller
ST1S40 3A DC step-down switching regulator
ST1S41 4 A step-down switching regulator
ST715 High input voltage - 85 mA LDO linear regulator
STLQ020 200 mA ultra-low quiescent current LDO
STP08DP05 Low-voltage 8-bit constant current LED sink with full outputs error detection
STP16DPS05 Low voltage 16-bit constant current LED sink driver with outputs error detection
STPIC6C595 Power logic 8-bit shift register
Part number
High voltage high/ low-side driver
High voltage high and low-side driver
High voltage high and low-side 4 A gate driver
High voltage high and low-side 2 A gate driver
High voltage high and low-side 2 A gate driver
38 V 500 mA synchronous step-down switching regulator with 30 uA quiescent current
38 V 2 A synchronous step-down switching regulator with 30 uA quiescent current
38 V 1.5 A synchronous step-down switching regulator with 30 uA quiescent current
300 mA very low quiescent current Linear regulator IC with automatic Green mode
1A Very low drop voltage regulator IC
500 mA very low drop voltage regulator
16 Channels LED driver with Error detection, Current Gain Control and 12/16 bit PWM Brightness control
24-Channels LED driver with LED error detection and gain control
3 A monolithic step-down current source with dimming capability
3 A, 61 V monolithic current source with dimming capability
PWM-dimmable single channel LED driver with integrated boost controller
3A DC step-down switching regulator
4 A step-down switching regulator
High input voltage - 85 mA LDO linear regulator
200 mA ultra-low quiescent current LDO
Low-voltage 8-bit constant current LED sink with full outputs error detection
Low voltage 16-bit constant current LED sink driver with outputs error detection
Power logic 8-bit shift register

Power Transistors

Part number Description
STD18N55M5 N-channel 550 V, 0.150 Ohm typ., 16 A MDmesh M5 Power MOSFET in DPAK package
STD7N60M2 N-channel 600 V, 0.86 Ohm typ., 5 A MDmesh M2 Power MOSFET in DPAK package
STD9N60M2 N-channel 600 V, 0.72 Ohm typ., 5.5 A MDmesh M2 Power MOSFET in DPAK package
STF10N60M2 N-channel 600 V, 0.55 Ohm typ., 7.5 A MDmesh M2 Power MOSFET in TO-220FP package
STF15N65M5 N-channel 650 V, 0.308 Ohm typ., 11 A MDmesh M5 Power MOSFET in TO-220FP package
STF18N65M5 N-channel 650 V, 0.198 Ohm typ., 15 A MDmesh M5 Power MOSFET in TO-220FP package
STL110N10F7 N-channel 100 V, 5 mOhm typ., 107 A STripFET F7 Power MOSFET in a PowerFLAT 5x6 package
STL11N3LLH6 N-channel 30 V, 6 mOhm typ., 11 A STripFET H6 Power MOSFET in a PowerFLAT(TM) 3.3 x 3.3 package
STL130N8F7 N-channel 80 V, 3.0 mOhm typ., 120 A STripFET F7 Power MOSFET in PowerFLAT 5x6 package
STL160N4F7 N-channel 40 V, 2.1 mOhm typ., 120 A STripFET F7 Power MOSFET in a PowerFLAT 5x6 package
STL220N6F7 N-channel 60 V, 0.0012 Ohm typ., 260 A STripFET F7 Power MOSFET in a PowerFLAT 5x6 package
Part number
N-channel 550 V, 0.150 Ohm typ., 16 A MDmesh M5 Power MOSFET in DPAK package
N-channel 600 V, 0.86 Ohm typ., 5 A MDmesh M2 Power MOSFET in DPAK package
N-channel 600 V, 0.72 Ohm typ., 5.5 A MDmesh M2 Power MOSFET in DPAK package
N-channel 600 V, 0.55 Ohm typ., 7.5 A MDmesh M2 Power MOSFET in TO-220FP package
N-channel 650 V, 0.308 Ohm typ., 11 A MDmesh M5 Power MOSFET in TO-220FP package
N-channel 650 V, 0.198 Ohm typ., 15 A MDmesh M5 Power MOSFET in TO-220FP package
N-channel 100 V, 5 mOhm typ., 107 A STripFET F7 Power MOSFET in a PowerFLAT 5x6 package
N-channel 30 V, 6 mOhm typ., 11 A STripFET H6 Power MOSFET in a PowerFLAT(TM) 3.3 x 3.3 package
N-channel 80 V, 3.0 mOhm typ., 120 A STripFET F7 Power MOSFET in PowerFLAT 5x6 package
N-channel 40 V, 2.1 mOhm typ., 120 A STripFET F7 Power MOSFET in a PowerFLAT 5x6 package
N-channel 60 V, 0.0012 Ohm typ., 260 A STripFET F7 Power MOSFET in a PowerFLAT 5x6 package

Thyristors (SCR) and AC Switches

Part number Description
TN1205H High temperature 12 A SCRs
TN1205T-600 12 A 600 V DPAK standard SCRs
TN1215 12A standard SCRs
TN1515-600B 15 A 600 V standard SCR Thyristor in DPAK
TN1605H-6G High Temperature 16A SCRs
TN2010H-6G High Temperature 20A SCRs
TN805 8A standard SCRs
TN815 8A standard SCRs
Part number
High temperature 12 A SCRs
12 A 600 V DPAK standard SCRs
12A standard SCRs
15 A 600 V standard SCR Thyristor in DPAK
High Temperature 16A SCRs
High Temperature 20A SCRs
8A standard SCRs
8A standard SCRs