Smart Plug

Search History

Bookmark

Please log in to show your saved searches.

Overview

Solutions

HW Evaluation Tools

Resources

Tools and Software

Key Products

Get Started

Quick links

Providing consumers with real-time information on energy consumption can help improve awareness and promote more energy-conscious behaviors, good for reducing electricity bills and, globally, carbon emissions. Smart plugs, an energy measurement and control system connected to the home area network (HAN) and to mobile devices including smartphones, can help with this.

We have a complete offer of high-accuracy energy metering ICs and high-performance STM32 microcontrollers as well as buck or flyback AC-DC converters, BLE and 802.15.4 Thread and wM-Bus wireless connectivity and narrow-band power line communication solutions.

In addition we can help developers reduce time to market with a comprehensive set of hardware and software evaluation and development tools and reference designs.

Smart plug block diagram

Part Number	Description
STEVAL-ISA010V1	Ultra wide range dual output back converter demonstration board based on the VIPER16	Quick view Key Features EMC: burst - IEC 61000-4-4 - 8 kV EMC: surge - IEC 61000-4-5 - 2 kV RoHS compliant Isolation: non isolated - N connected to output GND PCB type and size:FR4, single side 70 μmdim.: 27 x 45 mm Input voltage Vin: 85 - 500 VAC (f: 45 - 66 Hz) Output current: 150 mA total (5 V and 12 V output) output current for full input voltage range Output voltages:V1= 12 V ± 10%V2= 5 V ± 4% Short-circuit protection EMI: In accordance with EN55022 - class B Standby: 96 mW at 230 VAC Show More Product Details Download databrief IMAGE FEATURED RESOURCES Schematics BOM Gerber
STEVAL-FKI868V2	Sub-1GHz (860-940 MHz) transceiver development kit based on S2-LP	Quick view Key Features S2-LP narrow band ultra-low power sub-1GHz transceiver in a standalone RF Module tuned for 860-940 MHz frequency bands STM32 Nucleo-64 development board with STM32L0 MCU Suitable for Wireless M-Bus systems Associated S2-LP development kit including, documentation, firmware for STM32L and GUI Programmable RF output power up to +16 dBm Modulation schemes: 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, OOK, and ASK Air data rate from 0.3 to 500 kbps Ultra-low power consumption: 6.7 mA RX 10 mA TX @ +10 dBm Excellent performance of receiver sensitivity (up to -130 dBm) Low duty cycle RX/TX operation mode Automatic acknowledgement, retransmission, and timeout protocol engine SPI interface for microcontroller USB interface RoHS compliant Show More Product Details Download databrief IMAGE FEATURED RESOURCES Schematics BOM Gerber
STEVAL-ISA111V1	Wide range single output demonstration board based on the VIPER26HN	Quick view Key Features Universal input mains range: input voltage 90 - 264 V_AC frequency 45 - 65 Hz Single-output voltage: 12 V at 1 A continuous operation Standby mains consumption: < 30 mW at 230 V_AC Average efficiency: > 80% Fully protected against faults (overload, feedback disconnection and overheating) EMI: according to EN55022-Class-B RoHS compliant Show More Product Details Download databrief IMAGE FEATURED RESOURCES Schematics BOM
EVALSTPM32	Single-phase energy metering evaluation board with shunt current sensor based on the STPM32	Quick view Key Features 0.2% accuracy single-phase meter V_nom (RMS) = 140 to 300 V, I_nom /I_max(RMS) = 5/100 A, f_lin = 50/60 Hz ± 10% Connector for USB isolated hardware programmer tool STEVAL-IPE023V1 and PC GUI RS232 and UART isolated connectors to PC GUI SPI/UART switch for device peripheral selection 2 programmable LEDs on board Digital expansion to external system-on-chip or MCU 3.3 V power supply: external or through STEVAL-IPE023V1 isolated USB board IEC61000 standard compliant RoHS compliant Show More Product Details Download databrief IMAGE FEATURED RESOURCES Schematics BOM Gerber
NUCLEO-F746ZG	STM32 Nucleo-144 development board with STM32F746ZG MCU, supports Arduino, ST Zio and morpho connectivity	Quick view Key Features Common features STM32 microcontroller in LQFP144 package 3 user LEDs 2 user and reset push-buttons 32.768 kHz crystal oscillator Board connectors:SWDST Zio expansion connector including ARDUINO^® Uno V3ST morpho expansion connector Flexible power-supply options: ST-LINK, USB V_BUS or external sources On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port Comprehensive free software libraries and examples available with the STM32Cube MCU Package Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil^® and GCC-based IDEs Board-specific features External or internal SMPS to generate V_core logic supply Ethernet compliant with IEEE-802.3-2002 USB OTG full speed or device only Board connectors:USB with Micro-AB or USB Type-C™Ethernet RJ45 Arm^® Mbed Enabled™ compliant Show More Product Details Download databrief IMAGE FEATURED RESOURCES Schematics BOM Gerber
NUCLEO-F429ZI	STM32 Nucleo-144 development board with STM32F429ZI MCU, supports Arduino, ST Zio and morpho connectivity	Quick view Key Features Common features STM32 microcontroller in LQFP144 package 3 user LEDs 2 user and reset push-buttons 32.768 kHz crystal oscillator Board connectors:SWDST Zio expansion connector including ARDUINO^® Uno V3ST morpho expansion connector Flexible power-supply options: ST-LINK, USB V_BUS or external sources On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port Comprehensive free software libraries and examples available with the STM32Cube MCU Package Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil^® and GCC-based IDEs Board-specific features External or internal SMPS to generate V_core logic supply Ethernet compliant with IEEE-802.3-2002 USB OTG full speed or device only Board connectors:USB with Micro-AB or USB Type-C™Ethernet RJ45 Arm^® Mbed Enabled™ compliant Show More Product Details Download databrief IMAGE FEATURED RESOURCES Schematics BOM Gerber
STEVAL-ISA177V1	5 V, 0.85 A flyback converter using VIPer™ Plus - VIPer01	Quick view Key Features Universal AC main input voltage range: 85V_AC to 265V_AC Output range: 5 V / 0.85 A Rated output power: 4.25 W Input power in standby @ 230 V_AC : < 9 mW Active mode efficiency: > 74% EMI: according to EN55022-Class-B RoHS compliant Show More Product Details Download databrief IMAGE FEATURED RESOURCES Schematics BOM Gerber
STEVAL-ILL085V1	Wide input and wide output voltage LED driver with high power factor and low THD based on HVLED001A	Quick view Key Features AC input voltage range: 90 V to 300 V LED voltage / current: 60 V-105 V / 700 mA Constant LED current: 700 mA ± 2% Power factor: > 0.95 Input current THD: < 10% Standby consumption: < 0.5 W Open-circuit and short-circuit protection Provision for smart features: ON / OFF / DIMMING RoHS compliant Show More Product Details Download databrief IMAGE FEATURED RESOURCES Schematics BOM Gerber
STEVAL-ILL070V4	35 W dimmable single string LED driver using HVLED001A and STF10LN80K5	Quick view Key Features Input voltage: V_IN = 90 - 305 V_rms , f: 45 - 66 Hz Output current: 700 mA (V_LED = 24 V to 48 V) Dimming: 100% to 10% Dimming interfaces: 0 - 10 V and PWM input High power factor, low THD Efficiency: > 90% @ full load Open load voltage limiting (52.4 V) Optional remote turn-off input Optional 3.3 V – 0.1 A voltage regulator Fast V_OUT discharge RoHS compliant Show More Product Details Download databrief IMAGE FEATURED RESOURCES Schematics Gerber
X-NUCLEO-NFC04A1	Dynamic NFC/RFID tag IC expansion board based on ST25DV04K for STM32 Nucleo	Quick view Key Features Expansion board based on the ST25DV04K dynamic NFC/RFID tag for STM32 Nucleo Up to 4-Kbit memory with NDEF support 54 mm diameter, single layer circular antenna Compatible with STM32 Nucleo boards Equipped with Arduino™ UNO R3 connector Self-powered or powered through the Arduino™ UNO R3 connectors Three general purpose LEDs Scalable solution, capable of cascading multiple boards for larger systems Free comprehensive development firmware library and example for ST25DV04K, compatible with STM32Cube firmware FCC and IC verified RoHS compliant Show More Product Details Download databrief IMAGE FEATURED RESOURCES Schematics BOM Gerber
ST25DV-DISCOVERY	Discovery kit for ST25DV04 Dynamic NFC/RFID tag IC with fast transfer mode capability	Quick view Key Features Two ready-to-use printed circuit boards (PCB): ST25DV_Discovery_Mboard: STM32F405VGT6 LQFP100 32-bit microcontroller, with 1 Mbyte Flash memory, 192 + 4 Kbytes SRAM. LCD color screen (320 x 200 pixels) Touch screen driver Different color LEDs (power, user, ST link) User push button Joystick for menu selection Reset button On board ST link for microcontroller firmware upgrade and debug ST link mini USB User micro USB USB micro or mini connector for board powering Demonstration use cases stored in memory Demonstration edition (optional add-on module) with Bluetooth Low Energy module, Wi-Fi^® module and JTAG 20 pin connector ST25DV_Discovery_ANT_C5: 40 mm x 24 mm, 13.56 MHz inductive antenna etched on the PCB ST25DV04K Dynamic NFC / RFID tag I² C interface connector Energy harvesting output (VOUT) with a 10 nF capacitance filtering circuit GPO configurable as RF WIP/BUSY output, to indicate that an RF operation is ongoing Show More Product Details Download databrief IMAGE FEATURED RESOURCES Schematics BOM Gerber
STEVAL-FKI915V1	Sub-1GHz transceiver development kit based on S2-LP	Quick view Key Features S2-LP narrow band ultra-low power Sub-1GHz transceiver in a standalone RF module tuned for 860-940 MHz frequency bands with external power amplifier STM32 Nucleo-64 development board with STM32L152RE MCU Suitable for wireless M-Bus systems Suitable for SigFox applications Associated S2-LP development kit including, documentation, firmware for STM32L and GUI Programmable RF output power up to +27 dBm Modulation schemes: 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, OOK, and ASK Air data rate from 0.3 to 500 kbps Excellent performance of receiver sensitivity (up to -130 dBm) Low duty cycle RX/TX operation mode Automatic acknowledgement, retransmission and timeout protocol engine SPI interface for microcontroller USB interface RoHS compliant Show More Product Details Download databrief IMAGE FEATURED RESOURCES Schematics BOM Gerber
X-NUCLEO-PLM01A1	Power line communication expansion board based on ST7580 for STM32 Nucleo	Quick view Key Features STM32 Nucleo expansion board based on the ST7580 power line networking system-on-chip ST7580 main characteristics: FSK, PSK modem for robust wireline communication up to 28.8 kbps 8-18 V analog supply voltage 3.3 V digital supply Output transmitted signal capability up to 14 V_p-p , 1 A_rms Frequency range 9-250 kHz TX and RX filters on board optimized for the CENELEC B (95-125 kHz) frequency band, suitable for IoT / Smart Home / Smart City applications Compatible with STM32 Nucleo boards Equipped with Arduino UNO R3 connectors Example firmware available for point-to-point communication, compatible with STM32Cube firmware RoHS compliant Show More Product Details Download databrief IMAGE FEATURED RESOURCES Schematics BOM Gerber
STEVAL-IDB008V2	Evaluation platform based on the BlueNRG-2	Quick view Key Features Bluetooth^® SMART board based on the BlueNRG-2 Bluetooth low energy system on chip Associated BlueNRG-2 development kit SW package including firmware and documentation Up to +8 dBm available output power (at antenna connector) Excellent receiver sensitivity (-88 dBm) Very low power consumption: 7.7 mA RX and 8.2 mA TX at +0 dBm Bluetooth^® SMART v5.0 compliant, supports master, slave, simultaneous master-and-slave roles and Bluetooth low energy extended data length feature New integrated balun BALF-NRG-02D3 which integrates a matching network and harmonics filter SMA connector for antenna or measuring equipment 3 user LEDs 2 user buttons 3D digital accelerometer and 3D digital gyroscope MEMS pressure sensor with embedded temperature sensor RoHS compliant Show More Product Details Download databrief IMAGE FEATURED RESOURCES Schematics BOM Gerber
EVALKITST8500-1	ST8500 Programmable power line communication modem System on Chip evaluation kit	Quick view Key Features Power line communication evaluation kit based on ST8500 and STLD1 devices Complete power line communication (PLC) reference design, suitable to evaluate several narrow-band PLC protocols (G3, PRIME, etc.) in the frequency range up to 500 kHz Modular board architecture ST8500 full performance PLC module including the companion STLD1 line driver STM32 microcontroller mother board for system management, application host controller and interface to PC STEVAL-ISA175V1, wide-range input voltage, 9.4 W power supply board based on VIPER26HD Optional 12 - 15 V DC input available for laboratory tests without AC mains connection Show More Product Details Download databrief FEATURED RESOURCES Schematics BOM Gerber
EVALKITST7580-1	ST7580 Power Line Networking System On Chip Demonstration kit	Quick view Key Features Suitable for point-to-multipoint 2-way power line communication (PLC) over AC mains Flexible 2-board architecture: EVALST7580-1, PLC board based on the ST7580 narrow-band FSK/PSK power line networking system-on-chip EVLALTAIR900-M1, wide-range input voltage, 7.5 W power supply board based on the ALTAIR04-900 quasi-resonant current-mode SMPS controller STM32 microcontroller hosted on the EVALST7580-1 board to handle the ST7580 device and build a standalone power line node External access through several interface types: USB, SPI, I² C, USART, JTAG Opportunity to save and load data to/from an external μ-SD card Intuitive graphical user interface (GUI) for the Windows^® environment with fully programmable transceiver parameters Suitable for CENELEC EN50065 and FCC part 15 compliant applications Show More Product Details Download databrief FEATURED RESOURCES Schematics Gerber

Part Number

STEVAL-ISA010V1

Ultra wide range dual output back converter demonstration board based on the VIPER16

Quick view

Key Features

EMC: burst - IEC 61000-4-4 - 8 kV
EMC: surge - IEC 61000-4-5 - 2 kV
RoHS compliant
Isolation: non isolated - N connected to output GND
PCB type and size:FR4, single side 70 μmdim.: 27 x 45 mm
Input voltage Vin: 85 - 500 VAC (f: 45 - 66 Hz)
Output current: 150 mA total (5 V and 12 V output) output current for full input voltage range
Output voltages:V1= 12 V ± 10%V2= 5 V ± 4%
Short-circuit protection
EMI: In accordance with EN55022 - class B
Standby: 96 mW at 230 VAC

Product Details Download databrief

IMAGE

FEATURED RESOURCES

Schematics BOM Gerber

STEVAL-FKI868V2

Sub-1GHz (860-940 MHz) transceiver development kit based on S2-LP

Quick view

Key Features

S2-LP narrow band ultra-low power sub-1GHz transceiver in a standalone RF Module tuned for 860-940 MHz frequency bands
STM32 Nucleo-64 development board with STM32L0 MCU
Suitable for Wireless M-Bus systems
Associated S2-LP development kit including, documentation, firmware for STM32L and GUI
Programmable RF output power up to +16 dBm
Modulation schemes: 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, OOK, and ASK
Air data rate from 0.3 to 500 kbps
Ultra-low power consumption:
- 6.7 mA RX
- 10 mA TX @ +10 dBm
Excellent performance of receiver sensitivity (up to -130 dBm)
Low duty cycle RX/TX operation mode
Automatic acknowledgement, retransmission, and timeout protocol engine
SPI interface for microcontroller
USB interface
RoHS compliant

Product Details Download databrief

IMAGE

FEATURED RESOURCES

Schematics BOM Gerber

STEVAL-ISA111V1

Wide range single output demonstration board based on the VIPER26HN

Quick view

Key Features

Universal input mains range:
- input voltage 90 - 264 V_AC
- frequency 45 - 65 Hz
Single-output voltage: 12 V at 1 A continuous operation
Standby mains consumption: < 30 mW at 230 V_AC
Average efficiency: > 80%
Fully protected against faults (overload, feedback disconnection and overheating)
EMI: according to EN55022-Class-B
RoHS compliant

Product Details Download databrief

IMAGE

FEATURED RESOURCES

Schematics BOM

EVALSTPM32

Single-phase energy metering evaluation board with shunt current sensor based on the STPM32

Quick view

Key Features

0.2% accuracy single-phase meter
V_nom (RMS) = 140 to 300 V, I_nom /I_max(RMS) = 5/100 A, f_lin = 50/60 Hz ± 10%
Connector for USB isolated hardware programmer tool STEVAL-IPE023V1 and PC GUI
RS232 and UART isolated connectors to PC GUI
SPI/UART switch for device peripheral selection
2 programmable LEDs on board
Digital expansion to external system-on-chip or MCU
3.3 V power supply: external or through STEVAL-IPE023V1 isolated USB board
IEC61000 standard compliant
RoHS compliant

Product Details Download databrief

IMAGE

FEATURED RESOURCES

Schematics BOM Gerber

NUCLEO-F746ZG

STM32 Nucleo-144 development board with STM32F746ZG MCU, supports Arduino, ST Zio and morpho connectivity

Quick view

Key Features

Common features
- STM32 microcontroller in LQFP144 package
- 3 user LEDs
- 2 user and reset push-buttons
- 32.768 kHz crystal oscillator
- Board connectors:SWDST Zio expansion connector including ARDUINO^® Uno V3ST morpho expansion connector
- Flexible power-supply options: ST-LINK, USB V_BUS or external sources
- On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
- Comprehensive free software libraries and examples available with the STM32Cube MCU Package
- Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil^® and GCC-based IDEs
Board-specific features
- External or internal SMPS to generate V_core logic supply
- Ethernet compliant with IEEE-802.3-2002
- USB OTG full speed or device only
- Board connectors:USB with Micro-AB or USB Type-C™Ethernet RJ45
- Arm^® Mbed Enabled™ compliant

Product Details Download databrief

IMAGE

FEATURED RESOURCES

Schematics BOM Gerber

NUCLEO-F429ZI

STM32 Nucleo-144 development board with STM32F429ZI MCU, supports Arduino, ST Zio and morpho connectivity

Quick view

Key Features

Common features
- STM32 microcontroller in LQFP144 package
- 3 user LEDs
- 2 user and reset push-buttons
- 32.768 kHz crystal oscillator
- Board connectors:SWDST Zio expansion connector including ARDUINO^® Uno V3ST morpho expansion connector
- Flexible power-supply options: ST-LINK, USB V_BUS or external sources
- On-board ST-LINK debugger/programmer with USB re-enumeration capability: mass storage, Virtual COM port and debug port
- Comprehensive free software libraries and examples available with the STM32Cube MCU Package
- Support of a wide choice of Integrated Development Environments (IDEs) including IAR™, Keil^® and GCC-based IDEs
Board-specific features
- External or internal SMPS to generate V_core logic supply
- Ethernet compliant with IEEE-802.3-2002
- USB OTG full speed or device only
- Board connectors:USB with Micro-AB or USB Type-C™Ethernet RJ45
- Arm^® Mbed Enabled™ compliant

Product Details Download databrief

IMAGE

FEATURED RESOURCES

Schematics BOM Gerber

STEVAL-ISA177V1

5 V, 0.85 A flyback converter using VIPer™ Plus - VIPer01

Quick view

Key Features

Universal AC main input voltage range: 85V_AC to 265V_AC
Output range: 5 V / 0.85 A
Rated output power: 4.25 W
Input power in standby @ 230 V_AC : < 9 mW
Active mode efficiency: > 74%
EMI: according to EN55022-Class-B
RoHS compliant

Product Details Download databrief

IMAGE

FEATURED RESOURCES

Schematics BOM Gerber

STEVAL-ILL085V1

Wide input and wide output voltage LED driver with high power factor and low THD based on HVLED001A

Quick view

Key Features

AC input voltage range: 90 V to 300 V
LED voltage / current: 60 V-105 V / 700 mA
Constant LED current: 700 mA ± 2%
Power factor: > 0.95
Input current THD: < 10%
Standby consumption: < 0.5 W
Open-circuit and short-circuit protection
Provision for smart features: ON / OFF / DIMMING
RoHS compliant

Product Details Download databrief

IMAGE

FEATURED RESOURCES

Schematics BOM Gerber

STEVAL-ILL070V4

35 W dimmable single string LED driver using HVLED001A and STF10LN80K5

Quick view

Key Features

Input voltage: V_IN = 90 - 305 V_rms , f: 45 - 66 Hz
Output current: 700 mA (V_LED = 24 V to 48 V)
Dimming: 100% to 10%
Dimming interfaces: 0 - 10 V and PWM input
High power factor, low THD
Efficiency: > 90% @ full load
Open load voltage limiting (52.4 V)
Optional remote turn-off input
Optional 3.3 V – 0.1 A voltage regulator
Fast V_OUT discharge
RoHS compliant

Product Details Download databrief

IMAGE

FEATURED RESOURCES

Schematics Gerber

X-NUCLEO-NFC04A1

Dynamic NFC/RFID tag IC expansion board based on ST25DV04K for STM32 Nucleo

Quick view

Key Features

Expansion board based on the ST25DV04K dynamic NFC/RFID tag for STM32 Nucleo
Up to 4-Kbit memory with NDEF support
54 mm diameter, single layer circular antenna
Compatible with STM32 Nucleo boards
Equipped with Arduino™ UNO R3 connector
Self-powered or powered through the Arduino™ UNO R3 connectors
Three general purpose LEDs
Scalable solution, capable of cascading multiple boards for larger systems
Free comprehensive development firmware library and example for ST25DV04K, compatible with STM32Cube firmware
FCC and IC verified
RoHS compliant

Product Details Download databrief

IMAGE

FEATURED RESOURCES

Schematics BOM Gerber

ST25DV-DISCOVERY

Discovery kit for ST25DV04 Dynamic NFC/RFID tag IC with fast transfer mode capability

Quick view

Key Features

Two ready-to-use printed circuit boards (PCB):
- ST25DV_Discovery_Mboard:
- STM32F405VGT6 LQFP100 32-bit microcontroller, with 1 Mbyte Flash memory, 192 + 4 Kbytes SRAM.
- LCD color screen (320 x 200 pixels)
- Touch screen driver
- Different color LEDs (power, user, ST link)
- User push button
- Joystick for menu selection
- Reset button
- On board ST link for microcontroller firmware upgrade and debug
- ST link mini USB
- User micro USB
- USB micro or mini connector for board powering
- Demonstration use cases stored in memory
- Demonstration edition (optional add-on module) with Bluetooth Low Energy module, Wi-Fi^® module and JTAG 20 pin connector
ST25DV_Discovery_ANT_C5:
- 40 mm x 24 mm, 13.56 MHz inductive antenna etched on the PCB
- ST25DV04K Dynamic NFC / RFID tag
- I² C interface connector
- Energy harvesting output (VOUT) with a 10 nF capacitance filtering circuit
- GPO configurable as RF WIP/BUSY output, to indicate that an RF operation is ongoing

Product Details Download databrief

IMAGE

FEATURED RESOURCES

Schematics BOM Gerber

STEVAL-FKI915V1

Sub-1GHz transceiver development kit based on S2-LP

Quick view

Key Features

S2-LP narrow band ultra-low power Sub-1GHz transceiver in a standalone RF module tuned for 860-940 MHz frequency bands with external power amplifier
STM32 Nucleo-64 development board with STM32L152RE MCU
Suitable for wireless M-Bus systems
Suitable for SigFox applications
Associated S2-LP development kit including, documentation, firmware for STM32L and GUI
Programmable RF output power up to +27 dBm
Modulation schemes: 2-FSK, 2-GFSK, 4-FSK, 4-GFSK, OOK, and ASK
Air data rate from 0.3 to 500 kbps
Excellent performance of receiver sensitivity (up to -130 dBm)
Low duty cycle RX/TX operation mode
Automatic acknowledgement, retransmission and timeout protocol engine
SPI interface for microcontroller
USB interface
RoHS compliant

Product Details Download databrief

IMAGE

FEATURED RESOURCES

Schematics BOM Gerber

X-NUCLEO-PLM01A1

Power line communication expansion board based on ST7580 for STM32 Nucleo

Quick view

Key Features

STM32 Nucleo expansion board based on the ST7580 power line networking system-on-chip
ST7580 main characteristics:
- FSK, PSK modem for robust wireline communication up to 28.8 kbps
- 8-18 V analog supply voltage
- 3.3 V digital supply
- Output transmitted signal capability up to 14 V_p-p , 1 A_rms
- Frequency range 9-250 kHz
TX and RX filters on board optimized for the CENELEC B (95-125 kHz) frequency band, suitable for IoT / Smart Home / Smart City applications
Compatible with STM32 Nucleo boards
Equipped with Arduino UNO R3 connectors
Example firmware available for point-to-point communication, compatible with STM32Cube firmware
RoHS compliant

Product Details Download databrief

IMAGE

FEATURED RESOURCES

Schematics BOM Gerber

STEVAL-IDB008V2

Evaluation platform based on the BlueNRG-2

Quick view

Key Features

Bluetooth^® SMART board based on the BlueNRG-2 Bluetooth low energy system on chip
Associated BlueNRG-2 development kit SW package including firmware and documentation
Up to +8 dBm available output power (at antenna connector)
Excellent receiver sensitivity (-88 dBm)
Very low power consumption: 7.7 mA RX and 8.2 mA TX at +0 dBm
Bluetooth^® SMART v5.0 compliant, supports master, slave, simultaneous master-and-slave roles and Bluetooth low energy extended data length feature
New integrated balun BALF-NRG-02D3 which integrates a matching network and harmonics filter
SMA connector for antenna or measuring equipment
3 user LEDs
2 user buttons
3D digital accelerometer and 3D digital gyroscope
MEMS pressure sensor with embedded temperature sensor
RoHS compliant

Product Details Download databrief

IMAGE

FEATURED RESOURCES

Schematics BOM Gerber

EVALKITST8500-1

ST8500 Programmable power line communication modem System on Chip evaluation kit

Quick view

Key Features

Power line communication evaluation kit based on ST8500 and STLD1 devices
Complete power line communication (PLC) reference design, suitable to evaluate several narrow-band PLC protocols (G3, PRIME, etc.) in the frequency range up to 500 kHz
Modular board architecture
- ST8500 full performance PLC module including the companion STLD1 line driver
- STM32 microcontroller mother board for system management, application host controller and interface to PC
- STEVAL-ISA175V1, wide-range input voltage, 9.4 W power supply board based on VIPER26HD
Optional 12 - 15 V DC input available for laboratory tests without AC mains connection

Product Details Download databrief

FEATURED RESOURCES

Schematics BOM Gerber

EVALKITST7580-1

ST7580 Power Line Networking System On Chip Demonstration kit

Quick view

Key Features

Suitable for point-to-multipoint 2-way power line communication (PLC) over AC mains
Flexible 2-board architecture:
- EVALST7580-1, PLC board based on the ST7580 narrow-band FSK/PSK power line networking system-on-chip
- EVLALTAIR900-M1, wide-range input voltage, 7.5 W power supply board based on the ALTAIR04-900 quasi-resonant current-mode SMPS controller
STM32 microcontroller hosted on the EVALST7580-1 board to handle the ST7580 device and build a standalone power line node
External access through several interface types: USB, SPI, I² C, USART, JTAG
Opportunity to save and load data to/from an external μ-SD card
Intuitive graphical user interface (GUI) for the Windows^® environment with fully programmable transceiver parameters
Suitable for CENELEC EN50065 and FCC part 15 compliant applications

Product Details Download databrief

FEATURED RESOURCES

Schematics Gerber

00 Files selected for download

Technical Documentation

Application Notes

Description	Version	Size	Action
AN3306 Current sensing in metering applications using a Pulse current sensor and ST metering devices	1.1	633.4 KB	PDF
AN2648 Increasing the resolution of analog temperature sensors	1.4	161.7 KB	PDF
AN3970 PLM smartplug V2 getting started	2.0	631.41 KB	PDF
AN4962 S2-LP ETSI compliance test at 868 MHz SRD band	1.0	1.8 MB	PDF
AN2451 ST7540 FSK powerline transceiver design guide for AMR	3.4	2.38 MB	PDF
AN4068 ST7580 power line communication system-on-chip design guide	2.0	5.88 MB	PDF
AN5120 ST8500 programmable power line communication modem System on Chip design guide	2.0	1.79 MB	PDF
AN4165 STEVAL-ISA111V1: 12 V / 12 W, 115 kHz non-isolated flyback	2.0	2.47 MB	PDF
AN4855 STEVAL-ISA177V1 5 V/4.25 W non-isolated flyback demo with VIPer01	2.0	8.82 MB	PDF
AN2872 Super wide-range buck converter based on the VIPer16	1.2	581.24 KB	PDF
AN4392 Using the BlueNRG family transceivers under ARIB STD-T66 in the 2400 – 2483.5 MHz band	3.3	540.17 KB	PDF
AN4387 Using the BlueNRG family transceivers under ETSI EN 300 328 in 2400 –2483.5 MHz band	3.1	4.39 MB	PDF
AN4378 Using the BlueNRG family transceivers under FCC title 47 part 15 in the 2400 – 2483.5 MHz band	3.1	1.9 MB	PDF
AN4953 Using the S2-LP transceiver under ARIB STD-T108 in the 920 MHz band	1.0	4.23 MB	PDF
AN5008 Using the S2-LP transceiver under the ARIB STD-T67 standard	1.0	871.54 KB	PDF

AN3306

Current sensing in metering applications using a Pulse current sensor and ST metering devices

Part number	Description
TSV991	Wide-bandwidth (20MHz) rail to rail input/output 5V CMOS Op-Amp, single
TSZ121	Very high accuracy (5 uV) zero drift 5 V CMOS Op-Amp, single, GBP=400kHz
TSZ181	Very high accuracy (25 uV) zero drift 5V CMOS Op-Amps

Part number	Description
STPM32	ASSP for metering applications with up to four independent 24-bit 2nd order sigma-delta ADCs, 4 MHz OSF and 2 embedded PGLNA
STPM33	ASSP for metering applications with up to four independent 24-bit 2nd order sigma-delta ADCs, 4 MHz OSF and 2 embedded PGLNA

Part number	Description
ST7540	B-FSK - Stripped down Power Line Transceiver
ST7580	FSK, PSK multi-mode power line networking system-on-chip
ST8500	Programmable power-line communication modem system-on-chip
STLD1	Power-line communication dual line driver

Part number	Description
STLM20	Analog temperature sensor, ultra-low current 2.4 V, high precision
STTS751	2.25 V low-voltage local digital temperature sensor

Part number	Description
STM32F410RB	STM32 Dynamic Efficiency MCU with BAM, High-performance and DSP with FPU, ARM Cortex-M4 MCU with 128 Kbytes Flash, 100 MHz CPU, Art Accelerator
STM32F730R8	High-performance and DSP with FPU, Arm Cortex-M7 MCU with 64 Kbytes of Flash memory, 216 MHz CPU, Art Accelerator, L1 cache, HW crypto,SDRAM
STM32WB55CG	Ultra-low-power dual core Arm Cortex-M4 MCU 64 MHz, Cortex-M0+ 32MHz with 1 Mbyte Flash, Bluetooth 5, 802.15.4, USB, LCD, AES-256
STM32WB55RG	Ultra-low-power dual core Arm Cortex-M4 MCU 64 MHz, Cortex-M0+ 32MHz with 1 Mbyte of Flash memory, Bluetooth 5, 802.15.4, USB, LCD, AES-256
STM32WB55VG	Ultra-low-power dual core Arm Cortex-M4 MCU 64 MHz, Cortex-M0+ 32MHz with 1 Mbyte of Flash memory, Bluetooth 5, 802.15.4, USB, LCD, AES-256

Part number	Description
ST25DV04K	4-Kbit Dynamic NFC/RFID tag NFC Forum type V with I2C interface, fast transfer mode and energy harvesting
ST25DV16K	16-Kbit Dynamic NFC/RFID tag NFC Forum type V with I2C interface, fast transfer mode and energy harvesting
ST25DV64K	64-Kbit Dynamic NFC/RFID tag NFC Forum type V with I2C interface, fast transfer mode and energy harvesting

Part number	Description
L6984	36 V 400 mA synchronous step-down switching regulator
L6986	38 V 2 A synchronous step-down switching regulator with 30 uA quiescent current
VIPER16	VIPerPlus family: Energy saving 6W high voltage converter with direct feedback
VIPER26	VIPerPlus family: Energy saving 12W high voltage converter with direct feedback

Part number	Description
BlueNRG-2	Bluetooth® low energy wireless system-on-chip
S2-LP	Ultra-low power, high performance, sub-1GHz transceiver

Description	Version	Size	Action
800-1050V MDmesh™ K5 ST’s first super-junction VHV MOSFET Series	1.0	516.44 KB	PDF
BlueNRG-2 The IoT Ready Bluetooth® low energy System-on-Chip	4.0	403.31 KB	PDF
L6984, L6986 Energy saving synchronous DC-DC converters for industrial		1.24 MB	PDF
Repetitive voltage suppressors for overvoltage protection	1.0	1.29 MB	PDF
S2-LP:Ultra-low-power, high-performance, sub-1GHz RF transceiver	4.0	1.47 MB	PDF
ST25DV-I2C series - Dynamic NFC/RFID tags	1.0	1.47 MB	PDF
STM32WB Wireless Series Bluetooth™ 5.0 and IEEE 802.15.4	19.11	320.75 KB	PDF
STPM32, STPM33, STPM34 - Taking care of every milliwatt	10.2016	1.58 MB	PDF
STarGRID power-line networking SoC platform	08.2017	774.28 KB	PDF
Turnkey PLC chipset for smart-energy infrastructure	10.2017	775.07 KB	PDF

Search History

Bookmark

Smart plug block diagram

Technical Documentation

Presentations & Training Material

Publications and Collaterals

eDesignSuite

Amplifiers and Comparators

Data Converters

Interfaces and Transceivers

MEMS and Sensors

Microcontrollers & Microprocessors

NFC

Power Management

Power Transistors

Wireless Transceivers, MCUs and Modules