LED and General Lighting Solution Eval Boards - Products

100 W LED street lighting evaluation board using the STLUX385A digital controller

7.5 W non-isolated constant current LED driver based on VIPer0P

L6569 High Voltage Half Bridge Driver with Oscillator Evaluation Board

4 A HB LED driver with dimming function based on the LED2001 in an HSOP8 package

HB LED without Diagnostic (32 Led) based on STP16CP05

8-port IO-Link master with TMG stack

1 A, up to 60V Vin, buck LED driver board based on the LED6000

8-port IO-Link master based on IOLM4P L6360

High-brightness LED driver with diagnostics (40 LEDs) demonstration board based on the STP08DP05

Single-channel LED driver for automotive day-time running lights (DTRL) and front lights based on ALED6001 and STM32F103C6T6

LED driver expansion board based on LED1202 device for STM32 Nucleo

50 W converter using HVLED101 quasi resonant HPF flyback controller with primary side regulation

High brightness RGB LED array with LED error detection based on the STP24DP05 and STM32

300 W very high AC input voltage LED driver with digital power control

50 W converter using HVLED101 quasi resonant HPF flyback controller with secondary side regulation

5 V / 100 mA high voltage optimized buck-converter based on VIPer013BLS

Triac and AC switch insulated control evaluation board

0.5 A, floating boost LED driver board based on the LED6000

Power over Ethernet (PoE) powered 45 W LED driver with Bluetooth Low Energy (BLE) enabled control reference design

Smart home lighting based on HVLED815PF and SPBTLE-RF

75 W digitally controlled constant current LED driver reference design

3 W non-isolated offline LED driver demonstration board based on the VIPer22A-E

Six-channel ALED7707-based LED driver with embedded boost converter for automotive interior lighting and TFT backlighting

4-channel LED driver with charge pump based on the STP4CMP

High brightness LED array driver with diagnostics for automotive applications based on the STAP16DPPS05 and STM8A

3 A HB LED driver with dimming function based on the LED2000 in a QFN package

4 A HB LED driver with dimming function based onthe LED2001 in a QFN package

3 A LED driver based on the LED5000 in floating boost topology

3 A LED driver based on the LED5000 in BB+ topology

Smart home lighting based on HVLED815PF and SPSGRF

HVLED815 based evaluation board: 8W European range high power factor LED driver with primary constant voltage regulation

Automotive LED driver 4-channel evaluation kit based on ALED7709

LED lighting control using DMX512 control based on STM32F102C6T6 and STCS1APHR

3 A LED driver based on the LED5000 in BB- topology

Evaluation kit for LED8102S 8-channel LED driver with direct switch control

3.2 W LED power supply based on HVLED805

Evaluation kit for the LED1202 12-channel low quiescent current LED driver

STLUX385A evaluation board

STLED524 evaluation kit (5 x 24 matrix LED display driver)

RGB LED driver for automotive lighting based on ALED1642GW and STM8A

35W LED driver with very low THD,based on HVLED007 Transition Mode Flyback controller

Plug-in hardware module for the STM8S-DISCOVERY interface for DALI communication

60 W wide input range flyback converter using HVLED001A quasi resonant flyback controller

Analog wall dimmer for CFL/LED lamps based on the TS820 (USA version 110 V)

Analog wall dimmer for CFL/LED lamps based on the TS820 (EU version 220 V)

3 A HB LED driver with dimming function based on the LED2000 in an SO-8 Batwing package

35 W dimmable single string LED driver using HVLED001A and STF10LN80K5

18 W wide input range ultra slim flyback converter using HVLED001A quasi resonant flyback controller and STD8N80K5

18 W tube replacement zero ripple LED driver using HVLED001A quasi resonant flyback controller and STF10LN80K5

HB LED driver with inhibit based on the ST1CC40 in a QFN package

Step-up current controller for 4 LEDs based on the STLDC08 driver

Digital wall dimmer for halogen and low-consumption lamps

Step-up current controller for 2 LEDs based on the STLDC08 driver

Trailing edge phase control rotary wall dimmer based on STF17N62K3 power MOSFET

LCD panels backlight demonstration board based on the LED7707

3 A buck LED driver board based on the LED5000

HVLED815 based evaluation board: 10 W wide range high power factor isolated LED driver with primary side current regulation

0.5 A, inverting buck-boost LED driver board based on the LED6000

HVLED815 based evaluation board: 10 W wide range non-isolated high power factor LED driver with primary side current regulation

Multi-channel LED driver with integrated boost controller for medium/large LCD panel backlight based on LED7708 and STM32F103C6T6 - daughter board

Multi-channel LED driver with integrated boost controller for medium, large LCD panel backlight based on LED7708 and STM32F103C6T6A

35 W wide input range flyback converter using HVLED001A quasi resonant flyback controller and STF10LN80K5

USB to I2C/UART interface board for STNRG digital power controller products (STNRG01x and ST-ONE)

60 LED (6 x 10) cost-effective matrix display based on STP16CPC26 with Bluetooth low energy and Android app

Flash Driver based on STCF01

White LED Controller based on STLD40D

35 W wide input range flyback converter using HVLED001B quasi resonant flyback controller and STF10LN80K5

LCD panels backlight demonstration board based on the LED7706

16 channel LED driver expansion board based on LED1642GW for STM32 Nucleo

60 W wide input range flyback converter using HVLED001A controller in FOT mode

DC-DC LED driver expansion board based on LED6001 for STM32 Nucleo

25 W LED street light with 80 W solar energy charger based on STM32F101Rx

9 W Triac dimmable, high power factor, isolated LED driver based on the HVLED815PF (for US market)

High brightness LED array driver with diagnostics for automotive applications based on the STAP16DPS05 and STM8A

Single channel, 1 A automotive LED driver with boost controller for interior/exterior lights based on the ALED6001

15 W high power factor LED driver based on HVLED815PF

LED driver based on the LED6001

9 W, A19 format Triac dimmable, high power factor, non-isolated LED driver based on the HVLED815PF (for US market)

Smart LED driver using 6LoWPAN Mesh network for outdoor street lighting

Evaluation kit for automotive rear lights with pattern animations based on ALED1262ZT and STM8AF6266

Digitally controlled LED driver board for automotive lighting applications

Dimmable single string LED Driver for 35W indoor lighting applications using HVLED001B

AutoDevKit adaptive front lighting kit

Power Flash Driver based on STCF02

Evaluation board for the 12-Channel LED1202 low quiescent current LED driver

HB LED driver with inhibit based on the ST1CC40 in an SO-8 BW package

Multicolor LED matrix demonstration board based on the STP24DP05BTR

High brightness RGB LED array driver with local dimming and diagnostics based on LED1642GW and STM32

Driver for up to 6 white LEDs for display backlights based on the STLA02

Inverse Buck 35W with LED current controlled by HVLED002 with Analog/PWM dimming regulation

Master/slave control for multicolor LED matrix demonstration board based on the STM32F103VET6

80 W offline PFC and LED driver demonstration board with dimming based on the L6562A

Smart LED driver with high power factor using BLE Mesh network for indoor lighting

Digital wall dimmer for halogen and low-consumption lamps

48 V - 130 W high efficiency converter with PFC for LED street lighting applications based on L6562 and L6599

HVLED805 based evaluation board: 4.2 W isolated LED driver with primary side current regulation

HB LED driver with diagnostics based on the LED2472G and STM32

High brightness LED array driver based on STP16CPC26

7x25 LED Matrix panel based on STP16CPC26