STMicroelectronics provides turnkey solutions that address the growing demand for innovation to reach higher efficiency, higher power density and lower standby power designs. This is achieved through a wide range of power discrete components, analog ICs and digital processors. Explore the range of evaluation boards below to find the perfect fit for your design needs.
Recommended for you
Find the best design solution thanks to high-performances Quad-LDO evaluation board
The STEVAL-LDO001V1 allows smart evaluation of four ST's high-performance low-dropout linear voltage regulators specially designed for extend battery life in portable smart devices. Thanks to state-of-the-art technologies, designs and innovative packaging, designers can select the best solution in terms of ultra-low quiescent current, ultra-low noise and high PSRR, automatic green mode and miniature packages such as Flip-Chip or ST STAMP™.
Discover USB Type-C and PD controller evaluation boards
The STEVAL-ISC004V1 is a STUSB4710 evaluation board embedding a 20V capable DC/DC. The board is ready-to-use, acting as a USB PD provider pre-configured with 5 PDOs. The STEVAL-CCC002V1 is an USB Type-C controller evaluation board based on STUSB1600A. It can be used as a source, sink or dual power role and supports dead battery start-up.
Two new quasi-resonant fly-back SMPS designs
The STEVAL-ISA171V1 (12 V /15 W, based on the ViPer35HD) and the STEVAL-ISA162V1 (12 V / 10 W, based on the ViPer25HD) evaluation boards, implement a wide-range AC input voltage, isolated fly-back SMPS (switched mode power supply) operated in quasi-resonant mode to deliver high efficiency (>82% in active mode). They also feature low consumption under no-load conditions thanks to burst mode operation that reduces the average switching frequency and minimizes all frequency-related losses.
More from PSU and Converter Solution Eval Boards portfolio
- STEVAL-1PS01AJR Evaluation board based on ST1PS01AJR 400 mA nano-quiescent synchronous step-down converter
- STEVAL-1PS01EJR Evaluation board based on the ST1PS01EJR 400 mA nano-quiescent synchronous step-down converter
- STEVAL-1PS01DJR Evaluation board based on ST1PS01DJR 400 mA nano-quiescent synchronous step-down converter
- STEVAL-ISA179V1 15 V, 0.15 A buck converter using VIPer™ Plus - VIPer0P
- STEVAL-TSP004V2 5 V/4 A, synchronous flyback converter, Power Over Ethernet (PoE) - IEEE 802.3at compliant reference design
- STEVAL-LDO001V1 Quad high performance LDO evaluation board based on LDBL20, LDLN025, LD39130S and STLQ020
- STEVAL-ISA202V1 1.5 A step down switching regulator (VIN = 8 to 55 V) based on L4971
- STEVAL-ISB017V1 STC3117 evaluation board
- STEVAL-ISA101V1 2 A DC step-down switching regulator with 4 V/36 V input voltage range based on the L5973D
- STEVAL-ISA117V1 Wide range isolated flyback demonstration board, single output 12 V/4.2 W based on the VIPer16LN
- STEVAL-ISA069V1 3 A / 1.5 MHz step-down synchronous switching regulator based on the ST1S31 in DFN 3x3 package
- EVL6563S-200ZRC A 200 W ripple-free input current PFC pre-regulator with the L6563S
- EVSTDRIVEG600DG Demonstration board for STDRIVEG600 600V high-speed half-bridge gate driver with enhanced mode GaN HEMTs
- EVSTDRIVEG600DM Demonstration board for STDRIVEG600 600V high-speed half-bridge gate driver with MDmesh DM2 Power MOSFET
- EVLSRK1000A-PF SRK1000A adaptive synchronous rectification controller for flyback converter demonstration board with logic level SR MOSFET
- EVLSRK1000B-PF SRK1000B adaptive synchronous rectification controller for flyback
- EVLSRK1000-DP SRK1000 adaptive synchronous rectification controller for flyback
- EVLSRK1000A-TO SRK1000A adaptive synchronous rectification controller for flyback converter demonstration board with STF80N10F7
- EVLSRK1000-TO SRK1000 adaptive synchronous rectification controller for flyback
- EVLSRK1000-PF SRK1000 adaptive synchronous rectification controller for flyback converter demonstration board with logic level SR MOSFET
- EVALSTISO62XV1 Dual channel digital isolator evaluation board
- STEVAL-PMIC1K1 Evaluation board for high integration STPMIC1x power management IC for microprocessor units
- STEVAL-ISA191V1 5 V - 12 V, 15 W double output isolated flyback converter based on VIPer37LE
- STEVAL-ISA075V1 High efficiency DC-DC converter - compact solution based on L6738
- STEVAL-ISC003V1 STUSB4710 evaluation board USB PD controller with on-board DC-DC
- STEVAL-ISA076V1 Battery charger demonstration board with integrated power switch for Li-ION/Li-POLYMER based on the L6924D
- STEVAL-ISA161V1 Evaluation board for the SEA01 constant voltage and current controller with online digital trimming
- EVLMG1-250WLLC DC/DC resonant converter for industrial applications using MasterGaN1
- STDES-7KWOBC 7 kW on-board charger (OBC) reference design
- EVL4984-350W 350 W CCM PFC pre-regulator demonstration board based on the L4984D
- EVLCMB1-90WADP 19 V - 90 W adapter based on the STCMB1, TM PFC and HB LLC combo controller
- EVL80WLED-STCH03 EVL80WLED-STCH03: 80W-1A primary side current loop control LED driver with STCH03 for street lighting applications
- STEVAL-ISB032V1 Li-Ion battery charger evaluation board based on STNS01
- STEVAL-ISS001V2 Line interactive 450 W UPS reference design - 230 V / 50 Hz model
- STEVAL-ISA084V1 4 A peak, 800 kHz fixed-frequency PWM synchronous step-down demonstration board with enable on/off based on the ST1S40
- EVL6566B-65W-QR 19 V - 65 W quasi resonant flyback adapter board
- STEVAL-DPSTPFC1 3.6 kW Totem Pole PFC with inrush current limiter reference design using TN3050H-12WY and SCTW35N65G2V
- STEVAL-ISA156V1 38 V, 2 A synchronous step-down switching regulator evaluation board based on the L6986
- EVLCMB1-AIO210W 12 V - 210 W adapter based on STCMB1, combo TM PFC and HB LLC
- STEVAL-ISB68WA Qi-based wireless power receiver reference design for wearable applications up to 2.5 W using STWLC68
- STEVAL-ISB68RX Qi-based wireless power receiver for Baseline Power Profile (BPP) applications up to 5 W using STWLC68
- STEVAL-ISC002V1 Resonant LCC 90 W notebook power adapter based on the L6599 and STP9NK50ZF
- EVL150W-HVSL 150 V - 1 A LED driver using STCMB1
- STEVAL-ISA180V1 12 V - 0.6 A flyback isolated converter using VIPer™ Plus - VIPer0P
- STEVAL-ISA118V1 Offline power converter demonstration board using the Viper16
- STEVAL-ISA089V1 1.5 A step down switching regulator (Vin=4 to 36 V, Vout=1.235 to Vin) based on L5972D
- STEVAL-ISA121V1 Wide range single-output demonstration board based on the VIPER37LE
- STEVAL-L7983ADJ 12 V/0.3 A step down DC/DC converter (VIN = 12 to 60 V) based on the L7983PUR regulator
- EVL6591-90WADP 90W ac-dc asymmetrical half bridge adapter using L6591 and L6563
- STEVAL-SCR001V1 Inrush current solution with bypass SCR
- EVL400W-EUPL7 12 V - 400 W adapter based on L4984, L6699 and SRK2001
- STREF-SCS001V1 Fast and easy migration from DC barrel to Type-C
- STEVAL-ISA077V2 High efficiency synchronous rectifier step-up converter demonstration board based on the L6920D
- STEVAL-ISA138V1 19 V - 90 W adapter with PFC for laptop computers using the L6563H and L6699
- STEVAL-ISA077V1 High efficiency synchronous rectifier step-up converter demonstration board based on the L6920DB
- STEVAL-TSP006V2 Power over Ethernet - PD converter with 3.3 V 3 A output, standard IEEE 802.3af compliant
- STEVAL-POE002V1 5V/8A, synchronous flyback converter, Power over Ethernet (PoE) IEEE 802.3bt compliant reference design
- STEVAL-POE005V1 12V/8A, active clamp forward converter, Power Over Ethernet (PoE) IEEE 802.3bt compliant reference design
- STEVAL-ISA204V1 100W 5V/20A active clamp forward converter based on PM8804 for telecom systems
- STEVAL-1PS02A Evaluation board based on ST1PS02AQTR 400 mA nano-quiescent synchronous step-down converter with AUX switch
- STEVAL-1PS02B Evaluation board based on ST1PS02BQTR 400 mA nano-quiescent synchronous step-down converter with AUX switch
- STEVAL-POE006V1 3.3V/20A, active clamp forward converter, Power Over Ethernet (PoE) IEEE 802.3bt compliant reference design
- STEVAL-1PS02C Evaluation board based on ST1PS02CQTR 400 mA nano-quiescent synchronous step-down converter with AUX switch
- STEVAL-ISA203V1 48 V flyback converter 12 V - 5 A based on PM8804
- STEVAL-USBPD45C 45 W USB Type-C™ Power Delivery adapter reference design based on STCH03, STM32F051 and STUSB1602A
- STEVAL-1PS02D Evaluation board based on ST1PS02DQTR 400 mA nano-quiescent synchronous step-down converter with AUX switch
- STEVAL-ISA055V1 0.7 A / 1.2 V synchronous buck converter with enable function based on the ST1S12XX
- STEVAL-ISA135V1 4 W, 12 V output, isolated flyback converter using VIPer™ Plus - VIPER06HS
- STEVAL-VP319X1B 5 V / 0.6 A Buck converter based on VIPER319X
- STEVAL-L7983V33 3.3 V/0.3 A step down DC/DC converter (VIN = 3.5 V to 60 V) based on the L7983PU33R
- STEVAL-ISA133V1 Double output SMPS for power line applications using the ALTAIR04-900 primary controller
- EVLMG4-500WIBCK High power inverse buck for dimmable LED application with MASTERGAN4, HVLED002 and VIPER06XS
- STEVAL-PCC020V2 USB to I2C/UART interface board for STNRG digital power controller products (STNRG01x and ST-ONE)
- EVL6563S-250W 250W TRANSITION-MODE PFC PRE-REGULATOR WITH L6563S
- STEVAL-ISA177V1 5 V, 0.85 A flyback converter using VIPer™ Plus - VIPer01
- STEVAL-ISA095V1 Up to 3 A step-down switching regulator based on the ST1S14
- STEVAL-ISA182V1 8.4 W / 30 W peak power offline flyback converter using VIPER38HD
- STEVAL-ISF003V1 Low standby losses power front-end with inrush current-limitation
- STEVAL-TSP009V2 3.3 V/6 A, synchronous flyback converter, Power Over Ethernet (PoE) - IEEE 802.3at compliant reference design
- STEVAL-ISA140V1 15W, 12V output, isolated flyback converter using VIPer™ Plus - VIPER37HE
- STEVAL-ISA162V1 12 V/10 W isolated flyback converter based on VIPer25HD
- EVL6566A-75WES4 19 V - 75 W SMPS compliant with latest Energy Star criteria using the L6563 and the L6566A
- STEVAL-ISB033V1 Evaluation board for STBCFG01 single-cell Li+ battery charger with OTG boost, voltage mode fuel gauge and 200 mA LDO
- STEVAL-ISA055V2 0.7 A / 3.3 V synchronous buck converter with enable function based on the ST1S12XX
- STEVAL-ISA044V5 3 A synchronous 900 kHz step-down DC-DC converter with inhibit function based on the ST1S10 (Power SO-8)
- EVL6699-HVSL 150 V - 150 W LED driver with the L6564H and the L6699 Transition Mode PFC Pre-regulator, Half Bridge LCC Resonant Converter
- STEVAL-ISA142V1 50 W wide-range high power factor flyback converter using the L6564
- STEVAL-ISA126V1 5 V-2 A, 115 kHz flyback with temporary extra-power management based on the VIPER28HN
- STEVAL-IPFC02V1 2 kW two-channel interleaved PFC reference design based on the STNRGPF02 digital controller
- STEVAL-ISA062V1 6 W dual output SMPS demonstration board based on the VIPER17
- STEVAL-VP26K01F Three output isolated flyback converter for STCOMET smart meter and PLC system using VIPER267KDTR
- STEVAL-POE001V1 Power Over Ethernet (PoE) - IEEE 802.3bt compliant interface reference design
- STEVAL-ISB045V1 2.5 W wireless charger transmitter evaluation kit
- STEVAL-ISB041V1 Li-Ion/Li-Po battery power management evaluation board based on STBC02
- EVL6564H-25W-BB 25 W wide-range high power factor buck-boost converter demonstration board using the L6564H
- STEVAL-ISA107V1 4 A 850 kHz fixed-frequency PWM synchronous step-down demonstration board based on ST1S41IPHR (SO-8 ePad) with enable
- STEVAL-ISA108V1 4 A, 850 kHz fixed-frequency PWM synchronous step-down demostration board based on the ST1S41 in a VFQFPN package
- EVLONE65W Very high power density board - 65W USB Type-C power delivery
- STEVAL-ISA096V1 Auxiliary power supply in buck-boost topology based on the Viper06
- EVL4986A-1KWBL Low THD-High Efficiency, 1KW Bridgeless CCM-PFC pre-regulator based on L4986A
- STEVAL-DPS334C1 Digital power supply control board based on STM32F334
- STEVAL-DPSLLCK1 3 kW Full Bridge LLC resonant digital power supply evaluation kit
- STEVAL-ISA141V2 2 A, high efficiency single inductor buck-boost DC-DC converter and high brightness white LED driver based on the STBB3JCC
- STEVAL-ISA172V2 2 kW fully digital AC-DC power supply (D-SMPS) evaluation board
- STEVAL-VP26K01B 15 V / 100 mA high voltage buck converter reference design based on VIPER26K
- STEVAL-ISA152V1 3.3 V/3 A high efficiency step down DC-DC converter (VIN= 4.5 to 60 V) based on the L7987
- STEVAL-ISA102V2 80 W high performance transition mode PFC evaluation board based on L6562A
- STEVAL-VP12201F 12 V - 5 W isolated flyback converter based on VIPer122LS
- STEVAL-ISA154V1 0.7 A step-down switching regulator evaluation board based on the L5980
- STEVAL-ISA153V1 12 V, 15 W (20 W peak) isolated flyback converter based on the VIPER38LE
- STEVAL-ISA146V1 4 A step-down switching evaluation board based on the ST1S50
- EVLSTCH03-45WPD 45W USB Type-C Power Delivery 3.0 adapter based on STCH03, SRK1001 and STUSB4761
- STEVAL-ISA200V1 High efficiency synchronous step-down regulator based on the A6984
- STEVAL-ISA098V1 2 A step-down switching demonstration board based on the L7985A in HSOP8 package
- STEVAL-ISA114V1 5 V/0.8 W wide-range 30 kHz buck converter based on the VIPer06XS
- STEVAL-ISA097V1 2 A step-down switching demonstration board based on the L7985 in DFN10 package
- STEVAL-ISA043V2 1.5 A / 3.3 V high frequency synchronous buck converter demonstration board based on the ST1S06
- STEVAL-ISA083V1 4 A peak 800 kHz fixed-frequency PWM synchronous step-down demonstration board with enable on/off based on the ST1S40IPUR
- STEVAL-ISA100V1 3 A step-down switching demonstration board based on the L7986A in HSOP8 package
- STEVAL-ISA099V1 3 A step-down switching demonstration board based on the L7986 in DFN10 package
- STEVAL-ISA082V1 4 A peak 800 kHz fixed-frequency PWM synchronous step-down demonstration board with enable on/off based on the ST1S40IPHR
- STEVAL-1PS03A Evaluation board based on ST1PS03AQTR 400 mA nano-quiescent synchronous step-down converter with load switch
- STEVAL-ISA175V1 9.4 W, 15 V-5 V-3.3 V, three output isolated flyback converter for smart meter and power line systems using the VIPER26HD
- STEVAL-L7983V50 5.0 V / 0.3 A step down DC/DC converter (VIN = 5 to 60 V) based on the L7983PU50R regulator
- STEVAL-ISA093V1 3 A step-down switching power supply demonstration board based on the L7981 (QFN)
- EVAL5980 L5980, 0.7 A step-down switching regulator, evaluation board
- STEVAL-ISA094V1 3 A step-down switching power supply demonstration board based on the L7981 (HSOP8)
- STEVAL-ISA091V1 2 A step-down switching power supply demonstration board based on the L7980 (QFN)
- EVAL5983 1.5 A step-down switching regulator demonstration board based on the L5983
- STEVAL-USBPD27S Compact 27W USB Type-C? Power Delivery 3.1 with PPS adapter reference design
- STEVAL-ISA092V1 2 A step-down switching demonstration board based on the L7980
- STEVAL-ISB047V1 Qi certified 3-coil 15 W wireless charger TX evaluation kit based on STWBC-MC
- STEVAL-ISB009V1 Li-Ion battery monitoring and gas gauge evaluation board based on STC3100
- EVL6566A-75WADP 19 V - 75 W laptop adapter with tracking boost PFC pre-regulator, using the L6563 and the L6566A
- STEVAL-ISA132V1 300 W peak power (170 W continuous power) LLC resonant converter based on L6699, STB13N60M2 and STPS20M80CG
- EVAL-STCH03-45W 45W / 12V power supply based on STCH03 QR flyback controller and SRK1000B adaptive synchronous rectification controller
- STEVAL-ISA046V2 2 A / 3.3 V high-efficiency synchronous buck converter evaluation board based on the ST1S09I with inhibit
- STEVAL-SMACH15V1 15 W 5 V output USB adapter evaluation board with STCH03 CC-mode primary sensing switching controller
- EVALSTWBC-EP Qi MP-A15 15W wireless charger TX evaluation kit based on STWBC-EP
- EVLSRK1001-TO SRK1001 adaptive synchronous rectification controller for flyback converter demonstration board with SR MOSFET
- EVLSRK1001-PF SRK1001 adaptive synchronous rectification controller for flyback converter demonstration board with SR MOSFET
- STEVAL-ISA071V2 4 W non-insulated, wide input voltage range SMPS based on the VIPer16
- STEVAL-TSP003V2 Power over Ethernet - PD converter with 12 V 1 A output, standard IEEE 802.3af compliant
- STEVAL-LLL009V1 300 W very high AC input voltage LED driver with digital power control
- STEVAL-VP12201B 15 V/200 mA buck converter based on VIPER122
- STEVAL-VP013B1B 5 V / 100 mA high voltage optimized buck-converter based on VIPer013BLS
- EVAL5972D L5972D Up to 2A Step Down Switching Regulator Evaluation Board
- STEVAL-ISA174V1 7 W dual output offline flyback converter for home appliances using VIPer0P
- STEVAL-ISA176V1 ALTAIR05T-800 5 W wide range CV-CC optoless adapter evaluation board
- STEVAL-EFUSE01 Evaluation board based on the STEF01 fully programmable universal electronic fuse
- STEVAL-ISA116V1 5 W, 2-output wide-range buck converter based on the VIPER26LD
- STEVAL-ISB019V1 Evaluation board for STCC2540 USB charging controller
- STEVAL-ISB018V1 Evaluation board for STCC5021 USB charging controller attach detection
- STEVAL-L6982CDR 38 V, 2 A synchronous step-down switching regulator evaluation board based on the L6982CDR
- STEVAL-ISA079V2 High-efficiency monolithic synchronous step-down regulator based on the L6928
- EVLVIPGAN50PD 45W QR USB PD adaptor reference design based on VIPerGaN50 and STUSB4761
- STEVAL-L6982NDR 38 V, 2 A synchronous step-down switching regulator evaluation board based on the L6982NDR
- STEVAL-ISA078V1 High efficiency synchronous step-up regulator based on the L6926
- STEVAL-ISA079V1 High efficiency monolithic synchronous step-down regulator based on the L6928D
- STEVAL-ISV006V2 Up to 5 W solar battery charger with embedded MPPT based on SPV1040
- STDES-30KWVRECT 30 kW Vienna PFC rectifier reference design with digital control
- STEVAL-ISA198V1 2 A step down DC - DC switching regulator (VIN = 4.5 V to 60 V) based on the L7987L
- STEVAL-ISA125V1 5 V/10 W, 60 kHz isolated flyback with extra power management based on the VIPer28L
- STEVAL-ISA109V2 800 mA, 3 MHz, adjustable output high efficiency dual-mode buck-boost DC-DC converter based on the STBB2
- STEVAL-ISA171V1 12 V - 15 W quasi resonant flyback converter based on the VIPER35HD
- EVAL-SCS001V1 Fast and easy migration from DC barrel to Type-C
- STEVAL-ISA170V1 12 V - 150 W resonant converter with synchronous rectification based on L6563H, L6699 and SRK2001
- STEVAL-ISA178V1 5 V / 200 mA high voltage buck-converter based on VIPer01
- STEVAL-ISA149V1 19 V - 75 W SMPS compliant with latest Energy Star criteria using the L6563 and the L6566A
- STEVAL-ISA081V1 12 V /1 A SMPS wide range demonstration board based on the VIPER26
- STEVAL-ISA112V1 Wide range non-isolated flyback demonstration board, single-output 12 V/4 W based on the VIPER06HN
- STEVAL-ISA113V1 Wide range single-output demonstration board based on the VIPER06HS
- STEVAL-ISA115V1 12 V, 150 mA non-isolated buck converter using VIPer™ Plus - VIPER06XS
- STEVAL-ISA165V1 Evaluation board: SRK2001 adaptive synchronous rectification controller for LLC resonant converters with STP120N4F6
- STEVAL-ISA111V1 Wide range single output demonstration board based on the VIPER26HN
- EVL-SRK2001-HVS Evaluation board for SRK2001 adaptive synchronous rectification controller for LLC resonant converter with high voltage external sensing MOSFETs
- STEVAL-ISA129V1 16 V-280 mA non isolated off-line high voltage converter based on the VIPer16H
- STEVAL-ISA141V1 2 A, 2 MHz, Vout = 3.3 V, high-efficiency dual-mode buck-boost DC-DC converter based on the STBB3J
- STEVAL-ISA136V1 3W, 5V output, isolated flyback converter using VIPer™ Plus - VIPER06HN
- STEVAL-ISA134V1 12 V - 4 W, 115 kHz isolated flyback based on the VIPer06
- STEVAL-2STPD01 USB Type-C Power Delivery dual port adapter based on the STPD01 programmable buck converter
- STDES-50W2CWBC 50 W two-coil wireless charger transmitter reference design
- STEVAL-ISA144V1 1.5 A step-down switching regulator demonstration board based on the L5983
- STEVAL-ISA119V1 1.5 W double output buck demonstration board based on the VIPER16LD
- STDES-3KWTLCP 3 kW telecom rectifier reference design based on the STM32G474RBT6 digital power MCU
- STEVAL-L6986IV1 38 V, 5 W synchronous iso-buck converter evaluation board with dual isolated output based on the L6986I
- STDES-65ACFADP 65W ACF USB PD adapter reference design with ST-ONE digital controller and MasterGaN2
- STEVAL-VP22201B 5 V - 360 mA buck converter based on VIPer222XSTR
- STEVAL-ISA208V1 38 V, 3 A synchronous step-down switching regulator evaluation board based on the L6983CQTR
- EVAL-SCS003V1 STUSB utility Dongle
- STEVAL-ISA164V1 STNRG388A evaluation board
- STEVAL-ISA209V1 38 V, 3 A synchronous step-down switching regulator evaluation board based on the L6983NQTR
- STEVAL-ISA184V1 5V/1.2A 12V/750mA double output flyback converter using VIPER37LD
- EVAL-SCS002V1 Fast and easy migration from USB micro-B to Type-C
- EVLSTNRG-170W 170W SMPS with digitally controlled PFC and resonant LLC stage using STNRG388A
- STEVAL-ISA206V1 38 V, 2 A synchronous step-down switching regulator evaluation board based on L6986H
- EVL6564H-100W 100 W transition-mode PFC pre-regulator demonstration board based on the L6564H
- STEVAL-ISA122V1 Wide input-range, single-output 5 V / 11 W power supply demonstration board based on the VIPer27
- STEVAL-POE003V1 5V/20A, active clamp forward converter, Power Over Ethernet (PoE) - IEEE 802.3bt compliant reference design
- STEVAL-ISA130V1 12 V 140 mA 30 kHz non-isolated buck topology regulator based on VIPer06XN
- STEVAL-VP318L1F 15 V / 1.2 A SSR Flyback converter based on VIPer318L
- STEVAL-ISC005V1 Evaluation board for the STUSB4500 USB Power Delivery controller
- STEVAL-ISA010V1 Ultra wide range dual output back converter demonstration board based on the VIPER16
- STEVAL-CCC002V1 STUSB1600A Type-C™ controller evaluation board
- STEVAL-ISC004V1 STUSB4710A evaluation board (with on-board DC-DC)
- STEVAL-IPFC01V1 3 kW three-channel interleaved PFC based on the STNRGPF01 digital controller
- STDES-VRECTFD 15 kW, three-level, three-phase Vienna rectifier with digital control for power factor correction
- EVL6564-100W L6564 transiotion mode PFC evaluation board
- STEVAL-ISB035V1 Li-Ion/Li-Po battery power management evaluation board based on STBC03
- EVALMASTERGAN2 Demonstration board for MASTERGAN2 high power density half-bridge high voltage driver with two 650V enhanced mode GaN HEMT
- EVALMASTERGAN5 Demonstration board for MASTERGAN5 high power density half-bridge high voltage driver with two 650 V enhanced mode GaN HEMTs
- EVALMASTERGAN3 Demonstration board for MASTERGAN3 high power density half-bridge high voltage driver with two 650 V enhanced mode GaN HEMTs
- STEVAL-ISA106V1 1.5 A step-down switching regulator based on the L5973AD
- EVALMASTERGAN4 Demonstration board for MASTERGAN4 high power density half-bridge high voltage driver with two 650 V enhanced mode GaN HEMT
- STEVAL-ISB037V1 Evaluation board for the LD39020 High PSRR, 200mA LDO
- STEVAL-L6981NDR 38 V, 1.5 A synchronous step-down switching regulator evaluation board based on the L6981NDR
- STEVAL-L6981CDR 38 V, 1.5 A synchronous step-down switching regulator evaluation board based on the L6981CDR
- STEVAL-ISB014V2 Battery monitoring with alarm output for gas gauge applications based on the STC3115
- EVL4986-350W Low-THD 350W CCM-PFC pre-regulator based on L4986
- EVL012LED 200 W LED driver using the STNRG012
- EVL4985-350W Low-THD 350W CCM-PFC pre-regulator based on L4985
- STEVAL-NRG011TV 200 W power supply based on STNRG011 digital combo for LED TV
- STEVAL-ISB013V1 Battery monitor demonstration board with alarm output for gas gauge applications based on the STC3105
- STDES-PFCBIDIR 15 kW, three-phase, three-level Active Front End (AFE) bidirectional converter for industrial and electric vehicle DC fast charging applications
- STDES-VIENNARECT 15 kW, three-phase Vienna rectifier with low cost mixed-signal control for power factor correction
- EVL6562A-35WFLB 35W WIDE RANGE HIGH POWER FACTOR FLYBACK CONVERTER USING THE L6562A
- STEVAL-ISA044V6 3 A synchronous 900 kHz step-down DC-DC converter with inhibit function based on the ST1S10 (DFN)
- STEVAL-ISA070V1 3 A / 1.5 MHz step-down synchronous switching regulator based on the ST1S31 in SO-8 package
- STEVAL-ISA105V1 Power supply for energy meter and power line modem based on the ALTAIR04-900
- STEVAL-ISA159V1 High efficiency synchronous step-down regulator based on the L6984
- STEVAL-ISA160V1 3 A / 2.3 MHz step-down synchronous switching regulator based on the AST1S31HF in a DFN 3x3 package
- EVALMASTERGAN1 Demonstration board for MASTERGAN1 high power density half-bridge high voltage driver with two 650 V enhanced mode GaN HEMT
- STEVAL-IPFC12V1 2 kW two-channel interleaved PFC reference design based on the STNRGPF12 digital controller with digital inrush current control
- STEVAL-ISA158V1 38 V - 2 A synchronous step-down switching regulator evaluation board based on the A6986
- STEVAL-ISA187V1 38 V, 0.5 A synchronous step-down switching regulator evaluation board based on A6985F
- STEVAL-ISA211V1 100 W, ultra-wide range flyback converter based on L6566BH
- STEVAL-ISA188V1 38 V, 1.5 A synchronous step-down switching regulator evaluation board based on A6986F3V3
- STEVAL-ISA192V1 7 W dual output flyback converter with standby managed by capacitive touch using VIPer0P and STM32L
- STEVAL-ISA197V1 12 V, 7.8 W isolated flyback converter based on VIPer114LS
- STEVAL-ISA196V1 5 V / 1.2 A non-isolated flyback converter using VIPerPlus-VIPer114LS
- STEVAL-ISA189V1 38 V, 1.5 A synchronous step-down switching regulator evaluation board based on A6986F5V
- STEVAL-ISA183V1 16 W triple output quasi resonant flyback converter for air conditioning applications using VIPer35LD
- STEVAL-ISA185V1 38 V, 0.5 A synchronous step-down switching regulator evaluation board based on A6985F3V3
- STEVAL-ISA186V1 38 V, 0.5 A synchronous step-down switching regulator evaluation board based on A6985F5V
- STEVAL-ISA147V3 500 W fully digital AC-DC power supply (D-SMPS) based on STM32F334C8 microcontroller
- STEVAL-VP26K03F Double output isolated PSR flyback converter for smart meter and PLC systems using VIPER267KDTR
- STEVAL-VP26K02F Two output isolated SSR flyback converter for smart meter and PLC systems using VIPER267KDTR
- STEVAL-ISA195V1 5 V / 0.36 A buck converter using VIPerPlus ? VIPer11
- STEVAL-DPSG474 Digital power supply control kit based on STM32G474RE
- EVL6566B-40WSTB 40 W wide input range flyback converter using L6566BH Multimode controller for SMPS
- EVLSTCH03-36W-SR 36W USB charger with selectable output voltage (5-9-12 V @3A) based on STCH03L and SRK1000B
- EVLSTNRG011-150 12 V, 150 W power supply based on STNRG011 digital combo and SRK2001 adaptive synchronous rectifier controller
- EVLSRK1000B-TO SRK1000B adaptive synchronous rectification controller for flyback
- STEVAL-VP318L2F 15 V/1.2 A isolated PSR Flyback converter based on VIPER31
- STEVAL-TSP005V2 Power over Ethernet - PD converter with 5 V 2 A output, standard IEEE 802.3af compliant
- STEVAL-ISA042V2 1.5 A / 3.3 V step-down DC-DC converter demonstration board based on the ST1S03
- STEVAL-ISA190V1 38 V, 1.5 A synchronous step-down switching regulator evaluation board based on A6986F
- EVL6562A-400W L6562A 400W FOT-controlled PFC pre-regulator evaluation board
- STEVAL-ISA063V2 1 A, high efficiency single inductor DC-DC converter based on the STBB1-APUR
- EVL6562A-LED Constant current inverse buck LED driver using L6562A
- STEVAL-L7983V50 5.0 V / 0.3 A step down DC/DC converter (VIN = 5 to 60 V) based on the L7983PU50R regulator
- STEVAL-ISA093V1 3 A step-down switching power supply demonstration board based on the L7981 (QFN)
- STEVAL-ISA094V1 3 A step-down switching power supply demonstration board based on the L7981 (HSOP8)
- STEVAL-ISA091V1 2 A step-down switching power supply demonstration board based on the L7980 (QFN)
- STEVAL-ISA092V1 2 A step-down switching demonstration board based on the L7980
- STEVAL-1PS02A Evaluation board based on ST1PS02AQTR 400 mA nano-quiescent synchronous step-down converter with AUX switch
- STEVAL-ISA202V1 1.5 A step down switching regulator (VIN = 8 to 55 V) based on L4971
- STEVAL-1PS02B Evaluation board based on ST1PS02BQTR 400 mA nano-quiescent synchronous step-down converter with AUX switch
- STEVAL-ISA101V1 2 A DC step-down switching regulator with 4 V/36 V input voltage range based on the L5973D
- STEVAL-ISA055V1 0.7 A / 1.2 V synchronous buck converter with enable function based on the ST1S12XX
- STEVAL-ISA046V2 2 A / 3.3 V high-efficiency synchronous buck converter evaluation board based on the ST1S09I with inhibit
- STEVAL-ISA069V1 3 A / 1.5 MHz step-down synchronous switching regulator based on the ST1S31 in DFN 3x3 package
- STEVAL-ISA106V1 1.5 A step-down switching regulator based on the L5973AD
- STEVAL-L6981NDR 38 V, 1.5 A synchronous step-down switching regulator evaluation board based on the L6981NDR
- STEVAL-L7983V33 3.3 V/0.3 A step down DC/DC converter (VIN = 3.5 V to 60 V) based on the L7983PU33R
- STEVAL-L6981CDR 38 V, 1.5 A synchronous step-down switching regulator evaluation board based on the L6981CDR
- STEVAL-ISA044V6 3 A synchronous 900 kHz step-down DC-DC converter with inhibit function based on the ST1S10 (DFN)
- STEVAL-ISA095V1 Up to 3 A step-down switching regulator based on the ST1S14
- STEVAL-ISA070V1 3 A / 1.5 MHz step-down synchronous switching regulator based on the ST1S31 in SO-8 package
- STEVAL-ISA055V2 0.7 A / 3.3 V synchronous buck converter with enable function based on the ST1S12XX
- STEVAL-ISA044V5 3 A synchronous 900 kHz step-down DC-DC converter with inhibit function based on the ST1S10 (Power SO-8)
- STEVAL-L6982CDR 38 V, 2 A synchronous step-down switching regulator evaluation board based on the L6982CDR
- STEVAL-L6982NDR 38 V, 2 A synchronous step-down switching regulator evaluation board based on the L6982NDR
- STEVAL-ISA159V1 High efficiency synchronous step-down regulator based on the L6984
- STEVAL-ISA160V1 3 A / 2.3 MHz step-down synchronous switching regulator based on the AST1S31HF in a DFN 3x3 package
- STEVAL-ISA198V1 2 A step down DC - DC switching regulator (VIN = 4.5 V to 60 V) based on the L7987L
- STEVAL-ISA158V1 38 V - 2 A synchronous step-down switching regulator evaluation board based on the A6986
- STEVAL-ISA187V1 38 V, 0.5 A synchronous step-down switching regulator evaluation board based on A6985F
- STEVAL-ISA188V1 38 V, 1.5 A synchronous step-down switching regulator evaluation board based on A6986F3V3
- STEVAL-ISA189V1 38 V, 1.5 A synchronous step-down switching regulator evaluation board based on A6986F5V
- STEVAL-ISA185V1 38 V, 0.5 A synchronous step-down switching regulator evaluation board based on A6985F3V3
- STEVAL-ISA186V1 38 V, 0.5 A synchronous step-down switching regulator evaluation board based on A6985F5V
- STEVAL-ISA108V1 4 A, 850 kHz fixed-frequency PWM synchronous step-down demostration board based on the ST1S41 in a VFQFPN package
- STEVAL-2STPD01 USB Type-C Power Delivery dual port adapter based on the STPD01 programmable buck converter
- STEVAL-ISA144V1 1.5 A step-down switching regulator demonstration board based on the L5983
- STEVAL-ISA084V1 4 A peak, 800 kHz fixed-frequency PWM synchronous step-down demonstration board with enable on/off based on the ST1S40
- STEVAL-L6986IV1 38 V, 5 W synchronous iso-buck converter evaluation board with dual isolated output based on the L6986I
- STEVAL-DPSLLCK1 3 kW Full Bridge LLC resonant digital power supply evaluation kit
- STEVAL-ISA156V1 38 V, 2 A synchronous step-down switching regulator evaluation board based on the L6986
- STEVAL-ISA152V1 3.3 V/3 A high efficiency step down DC-DC converter (VIN= 4.5 to 60 V) based on the L7987
- STEVAL-ISA154V1 0.7 A step-down switching regulator evaluation board based on the L5980
- STEVAL-ISA208V1 38 V, 3 A synchronous step-down switching regulator evaluation board based on the L6983CQTR
- STEVAL-ISA146V1 4 A step-down switching evaluation board based on the ST1S50
- STEVAL-ISA209V1 38 V, 3 A synchronous step-down switching regulator evaluation board based on the L6983NQTR
- STEVAL-ISA098V1 2 A step-down switching demonstration board based on the L7985A in HSOP8 package
- STEVAL-ISA097V1 2 A step-down switching demonstration board based on the L7985 in DFN10 package
- STEVAL-ISA042V2 1.5 A / 3.3 V step-down DC-DC converter demonstration board based on the ST1S03
- STEVAL-ISA043V2 1.5 A / 3.3 V high frequency synchronous buck converter demonstration board based on the ST1S06
- STEVAL-ISA190V1 38 V, 1.5 A synchronous step-down switching regulator evaluation board based on A6986F
- STEVAL-ISA089V1 1.5 A step down switching regulator (Vin=4 to 36 V, Vout=1.235 to Vin) based on L5972D
- STEVAL-L7983ADJ 12 V/0.3 A step down DC/DC converter (VIN = 12 to 60 V) based on the L7983PUR regulator
- STEVAL-ISA083V1 4 A peak 800 kHz fixed-frequency PWM synchronous step-down demonstration board with enable on/off based on the ST1S40IPUR
- STEVAL-ISA100V1 3 A step-down switching demonstration board based on the L7986A in HSOP8 package
- STEVAL-ISA063V2 1 A, high efficiency single inductor DC-DC converter based on the STBB1-APUR
- STEVAL-ISA099V1 3 A step-down switching demonstration board based on the L7986 in DFN10 package
- STEVAL-ISA082V1 4 A peak 800 kHz fixed-frequency PWM synchronous step-down demonstration board with enable on/off based on the ST1S40IPHR
- STEVAL-1PS03A Evaluation board based on ST1PS03AQTR 400 mA nano-quiescent synchronous step-down converter with load switch
- STEVAL-VP318L1F 15 V / 1.2 A SSR Flyback converter based on VIPer318L
- STEVAL-ISA010V1 Ultra wide range dual output back converter demonstration board based on the VIPER16
- EVL400W-EUPL7 12 V - 400 W adapter based on L4984, L6699 and SRK2001
- STEVAL-ISA175V1 9.4 W, 15 V-5 V-3.3 V, three output isolated flyback converter for smart meter and power line systems using the VIPER26HD
- STEVAL-ISA179V1 15 V, 0.15 A buck converter using VIPer™ Plus - VIPer0P
- STEVAL-IPFC01V1 3 kW three-channel interleaved PFC based on the STNRGPF01 digital controller
- STDES-VRECTFD 15 kW, three-level, three-phase Vienna rectifier with digital control for power factor correction
- STEVAL-USBPD45C 45 W USB Type-C™ Power Delivery adapter reference design based on STCH03, STM32F051 and STUSB1602A
- EVAL-STCH03-45W 45W / 12V power supply based on STCH03 QR flyback controller and SRK1000B adaptive synchronous rectification controller
- STEVAL-ISA117V1 Wide range isolated flyback demonstration board, single output 12 V/4.2 W based on the VIPer16LN
- STEVAL-SMACH15V1 15 W 5 V output USB adapter evaluation board with STCH03 CC-mode primary sensing switching controller
- STEVAL-ISA135V1 4 W, 12 V output, isolated flyback converter using VIPer™ Plus - VIPER06HS
- STEVAL-VP319X1B 5 V / 0.6 A Buck converter based on VIPER319X
- STEVAL-ISA133V1 Double output SMPS for power line applications using the ALTAIR04-900 primary controller
- STEVAL-ISA071V2 4 W non-insulated, wide input voltage range SMPS based on the VIPer16
- EVL4986-350W Low-THD 350W CCM-PFC pre-regulator based on L4986
- EVL4985-350W Low-THD 350W CCM-PFC pre-regulator based on L4985
- STEVAL-NRG011TV 200 W power supply based on STNRG011 digital combo for LED TV
- STDES-PFCBIDIR 15 kW, three-phase, three-level Active Front End (AFE) bidirectional converter for industrial and electric vehicle DC fast charging applications
- STDES-VIENNARECT 15 kW, three-phase Vienna rectifier with low cost mixed-signal control for power factor correction
- STEVAL-ISA177V1 5 V, 0.85 A flyback converter using VIPer™ Plus - VIPer01
- STEVAL-VP12201B 15 V/200 mA buck converter based on VIPER122
- STEVAL-ISA182V1 8.4 W / 30 W peak power offline flyback converter using VIPER38HD
- STEVAL-ISA191V1 5 V - 12 V, 15 W double output isolated flyback converter based on VIPer37LE
- STEVAL-ISA174V1 7 W dual output offline flyback converter for home appliances using VIPer0P
- STEVAL-ISA176V1 ALTAIR05T-800 5 W wide range CV-CC optoless adapter evaluation board
- STEVAL-ISA140V1 15W, 12V output, isolated flyback converter using VIPer™ Plus - VIPER37HE
- STEVAL-ISA116V1 5 W, 2-output wide-range buck converter based on the VIPER26LD
- STEVAL-ISA162V1 12 V/10 W isolated flyback converter based on VIPer25HD
- STEVAL-ISA126V1 5 V-2 A, 115 kHz flyback with temporary extra-power management based on the VIPER28HN
- EVLVIPGAN50PD 45W QR USB PD adaptor reference design based on VIPerGaN50 and STUSB4761
- STEVAL-ISA105V1 Power supply for energy meter and power line modem based on the ALTAIR04-900
- EVL4984-350W 350 W CCM PFC pre-regulator demonstration board based on the L4984D
- STEVAL-IPFC02V1 2 kW two-channel interleaved PFC reference design based on the STNRGPF02 digital controller
- STDES-30KWVRECT 30 kW Vienna PFC rectifier reference design with digital control
- STEVAL-ISA062V1 6 W dual output SMPS demonstration board based on the VIPER17
- STEVAL-ISA125V1 5 V/10 W, 60 kHz isolated flyback with extra power management based on the VIPer28L
- STEVAL-IPFC12V1 2 kW two-channel interleaved PFC reference design based on the STNRGPF12 digital controller with digital inrush current control
- STEVAL-ISA171V1 12 V - 15 W quasi resonant flyback converter based on the VIPER35HD
- EVL80WLED-STCH03 EVL80WLED-STCH03: 80W-1A primary side current loop control LED driver with STCH03 for street lighting applications
- STEVAL-ISA211V1 100 W, ultra-wide range flyback converter based on L6566BH
- STEVAL-VP26K01F Three output isolated flyback converter for STCOMET smart meter and PLC system using VIPER267KDTR
- STEVAL-ISA192V1 7 W dual output flyback converter with standby managed by capacitive touch using VIPer0P and STM32L
- STEVAL-ISA197V1 12 V, 7.8 W isolated flyback converter based on VIPer114LS
- STEVAL-ISA196V1 5 V / 1.2 A non-isolated flyback converter using VIPerPlus-VIPer114LS
- STEVAL-ISA183V1 16 W triple output quasi resonant flyback converter for air conditioning applications using VIPer35LD
- STEVAL-ISA178V1 5 V / 200 mA high voltage buck-converter based on VIPer01
- STEVAL-ISA081V1 12 V /1 A SMPS wide range demonstration board based on the VIPER26
- STEVAL-ISA112V1 Wide range non-isolated flyback demonstration board, single-output 12 V/4 W based on the VIPER06HN
- STEVAL-ISA113V1 Wide range single-output demonstration board based on the VIPER06HS
- STEVAL-ISA115V1 12 V, 150 mA non-isolated buck converter using VIPer™ Plus - VIPER06XS
- STEVAL-ISA111V1 Wide range single output demonstration board based on the VIPER26HN
- STEVAL-VP26K03F Double output isolated PSR flyback converter for smart meter and PLC systems using VIPER267KDTR
- STEVAL-VP26K02F Two output isolated SSR flyback converter for smart meter and PLC systems using VIPER267KDTR
- STEVAL-ISA195V1 5 V / 0.36 A buck converter using VIPerPlus ? VIPer11
- STEVAL-ISA129V1 16 V-280 mA non isolated off-line high voltage converter based on the VIPer16H
- STEVAL-ISA096V1 Auxiliary power supply in buck-boost topology based on the Viper06
- STEVAL-ISA136V1 3W, 5V output, isolated flyback converter using VIPer™ Plus - VIPER06HN
- STEVAL-ISA134V1 12 V - 4 W, 115 kHz isolated flyback based on the VIPer06
- STEVAL-ISA119V1 1.5 W double output buck demonstration board based on the VIPER16LD
- EVL4986A-1KWBL Low THD-High Efficiency, 1KW Bridgeless CCM-PFC pre-regulator based on L4986A
- EVL6566B-40WSTB 40 W wide input range flyback converter using L6566BH Multimode controller for SMPS
- EVL6566B-65W-QR 19 V - 65 W quasi resonant flyback adapter board
- STEVAL-VP26K01B 15 V / 100 mA high voltage buck converter reference design based on VIPER26K
- STEVAL-VP12201F 12 V - 5 W isolated flyback converter based on VIPer122LS
- STEVAL-ISA153V1 12 V, 15 W (20 W peak) isolated flyback converter based on the VIPER38LE
- EVLSTCH03-36W-SR 36W USB charger with selectable output voltage (5-9-12 V @3A) based on STCH03L and SRK1000B
- STEVAL-ISA184V1 5V/1.2A 12V/750mA double output flyback converter using VIPER37LD
- STEVAL-VP318L2F 15 V/1.2 A isolated PSR Flyback converter based on VIPER31
- EVLSTCH03-45WPD 45W USB Type-C Power Delivery 3.0 adapter based on STCH03, SRK1001 and STUSB4761
- STEVAL-ISA122V1 Wide input-range, single-output 5 V / 11 W power supply demonstration board based on the VIPer27
- STEVAL-ISA114V1 5 V/0.8 W wide-range 30 kHz buck converter based on the VIPer06XS
- STEVAL-ISA180V1 12 V - 0.6 A flyback isolated converter using VIPer™ Plus - VIPer0P
- STEVAL-ISA118V1 Offline power converter demonstration board using the Viper16
- STEVAL-ISA130V1 12 V 140 mA 30 kHz non-isolated buck topology regulator based on VIPer06XN
- STEVAL-ISA121V1 Wide range single-output demonstration board based on the VIPER37LE