The STEVAL-BFA001V1B is an industrial reference design kit designed for condition monitoring (CM) and predictive maintenance (PdM).
The hardware development kit consists of an industrial sensor board (STEVAL-IDP005V1), an adapter for the ST-LINK/V2-1 programming and debugging tool (STEVAL-UKI001V1), a 0.050” 10-pin flat cable, a 4-pole cable mount connector plug with male contacts and an M12 female connector with a 2 m cable.
The firmware package includes dedicated algorithms for advanced time and frequency domain signal processing and analysis of the 3D digital accelerometer with 3 kHz flat bandwidth. The package includes drivers for pressure, relative humidity and temperature sensor monitoring. Audio algorithms for acoustic emission (AE) are also part of the package.
The firmware runs on the high performance STM32F469AI, ARM® Cortex®-M4, 32-bit microcontroller and the sensor data analysis results are sent via wired connectivity based on IO-Link device transceiver (IO-Link stack protocol not included).
The STEVAL-BFA001V1B reference design is suitable for monitoring motors, pumps and fans, and can accelerate the development of predictive maintenance solutions.
The package also allows connection with the STEVAL-IDP004V1 IO-Link master capable, multi-port evaluation board; a PC GUI included in the package displays the algorithms output and sensor data. The data can also be displayed on a PC using a common terminal emulator by simply connecting the STEVAL-IDP005V1 to a PC through the STEVAL-UKI001V1 adapter and ST-LINK/V2-1 included on any STM32 Nucleo-64 development board.
The package includes an industrial M12 cable for power or connection with a master port. The connection is managed using a standard multipolar cable with one wire used for IO-Link data, one for the L+ line (positive supply voltage pole) and one for the L- line (negative supply voltage pole).
The layout is designed to meet IEC61000-4-2/4 and EN60947 requirements for industrial applications.
The STEVAL-IDP005V1 is specifically designed with dimensions (50mm x 9mm x 9mm) that reflect real industrial applications and needs.
The firmware is freely available on STSW-BFA001V1.
|DB3663: Predictive maintenance kit with sensors and IO-Link capability||1.0||1 MB|
|UM2438: Predictive maintenance reference kit with sensors and IO-Link capability||1.0||2 MB|
|Capacitive MEMS accelerometer for condition monitoring||1.0||3 MB|
|STEVAL-BFA001V1B GETTING STARTED GUIDE||1.0||3 MB|
|STEVAL-BFA001V1B GERBER||1.0||28 MB|
|STEVAL-BFA001V1B BOM||1.0||54 KB|
|STEVAL-BFA001V1B SCHEMATIC||1.0||253 KB|
|Evaluation products license agreement||1.6||74 KB|
|Filters/EMI||WURTH ELEKTRONIK||Wurth Elektronik EMC / Filter products are ideal to solve all electromagnetic interferences. For example filtering of data, power and communication lines, common and differential noise suppression on wire or PCB.|
|Power Inductors||WURTH ELEKTRONIK||Wurth Elektronik power inductors are ideal for DC/DC converter and switching regulators with low operating voltages and extremly high efficiency.|
|STSW-BFA001V1||ST||Software package for STEVAL-BFA001V1B|
|Part Number||Core Product||Marketing Status||Unit Price (US$) *||Quantity||ECCN (US)||Country of Origin||More info||Order from ST||Order from Distributors|
|STEVAL-BFA001V1B||HTS221, ISM330DLC, LP25HB, M95M01-DF, MP34DT05-A, L6362A||Active : Product is in volume production||120.0||1||EAR99||ITALY||MORE INFO||Buy Direct Add to cart||DISTRIBUTOR AVAILABILITY|
|Part Number||Marketing Status||Package||Grade||RoHS Compliance Grade||WEEE Compliant||Material Declaration**|
(**) The Material Declaration forms available on st.com may be generic documents based on the most commonly used package within a package family. For this reason, they may not be 100% accurate for a specific device. Please contact our sales support for information on specific devices.